-T3/T4 turbo (stage 3 compressor wheel - slightly bigger than 16g)
-GReddy Type S BOV
-Apexi SAFC II (silver)
-GReddy Profec B Spec II Boost Controller
-2.5 in intercooler piping
-FMIC (20 x 5 x 2.5)
-Tial 38mm Wastegate
-420a exhaust manifold - machined flat
-High Temp. Silicone Couplers
-Steel Braided Oil Feed line
-Oil Return line
-All oil fittings
-3 gauge pod (Full A-pillar)
-3 Phantom Series Autometer Gauges (A/F, EGT, Oil Temp.)

This kit was a custom install by myself and other car buddies. It's good for up to 300-330 hp. The reason why I'm selling is because a car pulled out infront of me after the first snow. I hit the brakes and slid going sideways into the car. The drivers side rear wheel area was where the damage occured. The impact was estimated at 9-13 mph. The car is considered totalled. It's a direct bolt on with minor modification to the front bumper and passenger side radiator fan housing. I'm asking $3600 for everything. This is cheaper than going with a Hahn Racecraft Kit. Gauges, SAFC II, Greddy Type S BOV, and a front mount intercooler are features that Hahn does not have. Pick up is welcome. I will deliver to Chicago, Twin Cities, or anywhere within 250 miles from Rochester, MN (extra $250). Email me at (CRuff053@acad.roch.edu) for pictures. I have yet to take pics of damage, but ask and I will provide. I will not part out anything; it comes as a kit.

knock that price off by about $800 to $1000 and you'll probably see some prospectve buyers

Originally posted by RST95eclipse
I will deliver to Chicago, Twin Cities, or anywhere within 250 miles from Rochester, MN (extra $250).

there is no way shipping can be that much dude, i shipped an entire nitrous kit, to the opposite side of the country for $15 and it got there in only 3 days. All the part you have listed are not that heavy at all. plus your price is pretty high, but bump

Originally everything costed me $4000 plus a shit load of pizza for the install. $3600 is right where Hahn prices their kit with front mount. I need to correct myself; the kit isn't rated at 300-330hp. It's rated at 350hp. The turbo is the weak spot. You're right about getting offers. So I'll sell the entire kit for $2750, again $250 for personal delivery to Chicago area by me. Pickups are still welcome. The reason why it's high is because I just won't send the kit in one box. I prefer to be there in person for security on both parties, I won't scam you, you won't scam me.

$2750 for the entire kit. I'd rather not ship it to you. However, I will for a cashiers check or money order.

Originally posted by RST95eclipse
So I'll sell the entire kit for $2750, again $250 for personal delivery to Chicago area by me.

:eek Still highly priced imo. But I give a BUMP.

How is it too much? Ontop of the Hahn Kit, you'd get the Apexi SAFC II, front mount IC, gauges with pod, boost controller, and bigger IC pipes. Hahn's price = $3000 for kit without all those above. I don't understand how it's too much. Please explain.

I'm just saying its kind of highlu priced for this board... I wasnt saying you couldnt sell it for that much, Try E bay, you probably have a better chance of selling it to ppl across the world than you do on this forum with that price! I'm not hating, lol im just saying.

Hes right bro. The people on this board that dont already have a turbo kit (me included) are either too poor to to afford one or are going all motor. its a good deal no doubt, but it most likely wont sell for that much HERE.

ive seen a lot of stage 2 kits go for less than $2000 on here with front mount intercoolers. i almost bought a star stage 2 on here for $1300 about 6 months ago. hate to bust your bubble.

However, dont give up all hope... someone might be interested. Maybe you could try parting out the extras and then lowering the price of the kit :shrug maybe something to think about.

Thanks guys. I'll probably end up doing ebay. I just thought it would be a good thing to give it to someone in the upper Midwest, making shipping something that wouldn't need to be done. Didn't have a clue. I appreciate the info guys.

anytime man! that is what we are here for. :D Good luck with selling the kit though! I'm sure you won't have a problem though. :thumbsup

a used turbo kit that was put together by some random person rather than a respected tuner company has no chance in hell of getting 3600 for it. regardless of how much money you put into that kit, you wont see anywhere near that amount back unless some dumb ricer buys it from you off ebay. parts depreciate in value once you buy them and moreso once you install them. not trying to be an ass, just stating the facts.

Originally posted by RST95eclipse
I'm asking $3600 for everything.

:nuts

Originally posted by RST95eclipse
$3600 is right where Hahn prices their kit with front mount.

which is brand new and the IC is almost twice as tall as yours and plummed better...Hahn is also not a custom job by joe blow with used parts. they have years of R&D and tech support (sort of...) not to mention a warrenty of sorts.

Originally posted by RST95eclipse
I will deliver to Chicago, Twin Cities, or anywhere within 250 miles from Rochester, MN (extra $250).

and this is where the crack pipe hit went over the maximum alotted tokage... $250.00 for shipping/delivery??????

you really need to re-evaluate your priceing stratagy. You wont even get $3000.00 from ebay... you're just plain not being realistic.