I might have a 95 Talon that I'm going to be parting out, and I want to see who's interested in what parts...

Complete 96 Talon 5 Speed car, with running motor and working tranny.
I haven't picked the car up yet,but I will later this week.
So who wants what? :)

Only thing I won't be selling off the car is the rear brakes... want them for my RS.

how much for the tranny control unit thingybobber? TCU?

WEll it's a 5 speed car... so they're no tranny controller, just the PCM for the engine and body ;)

How much do you want for just your block?

I'd sell the motor complete. It's a running, perfectly fine motor.

If its Black, I want the drivers side door handle.

dibs on passenger door handle, ECU, tranny, all shift linkage including pedal (basically everything for the swap), gauge cluster. How much shipped to 78233?

If you don't want to mess with the BS, how much for tranny, ECU, and gauge cluster alone?

Originally posted by cougar694u
dibs on passenger door handle, ECU, tranny, all shift linkage including pedal (basically everything for the swap), gauge cluster. How much shipped to 78233? If you don't want to mess with the BS, how much for tranny, ECU, and gauge cluster alone?

Not sure what all that's worth... make me a good offer ;)

Originally posted by cougar694u
dibs on passenger door handle, ECU, tranny, all shift linkage including pedal (basically everything for the swap), gauge cluster. How much shipped to 78233? If you don't want to mess with the BS, how much for tranny, ECU, and gauge cluster alone?

I will check on the door handles... and let you know.

Originally posted by MrSlick
Not sure what all that's worth... make me a good offer ;)

Just curious, is it 95 or 96? I need a 95 ECU, everything else doesn't matter.

All I truly need is the tranny and ecu (I'm looking at price as the issue). The most I can afford is about $200 right now due to Christmas and moving to a new city.

Originally posted by cougar694u

Originally posted by MrSlick Not sure what all that's worth... make me a good offer ;)

Just curious, is it 95 or 96? I need a 95 ECU, everything else doesn't matter. All I truly need is the tranny and ecu (I'm looking at price as the issue). The most I can afford is about $200 right now due to Christmas and moving to a new city.

I believe it's a 95... I'll check.

$200 is a little on the low side for a working tranny :).

Yeah, I know, but it's a starting point.

Originally posted by MrSlick Not sure what all that's worth... make me a good offer ;)

^^^That's one of those statements where you never know what to offer. Go too high, get ripped off, go to loo and someone gets offended.

What do you have in mind?

Originally posted by cougar694u
Yeah, I know, but it's a starting point.

Originally posted by MrSlick Not sure what all that's worth... make me a good offer ;)

^^^That's one of those statements where you never know what to offer. Go too high, get ripped off, go to loo and someone gets offended. What do you have in mind?

I'd take $300 + shipping for the tranny.
$100 for the ECU.
$100 for all the ATX to MTX stuff, linkage and shifter... etc.

You have a PM.

How much for the complete block and head? very interested

I'll have pics tomorrow...

I'd rather sell the motor complete... it runs perfectly.

Lee.

Originally posted by MrSlick
I'll have pics tomorrow... I'd rather sell the motor complete... it runs perfectly. Lee.

That's fine. Complete motor, head, block, crank, pistons, etc, one unit, shipped as one unit, dropped right into engine bay.

Price?

edit:
also, where are you located in PA? how far from blatimore? If you give me a great price, i would probably pick up the motor.

I may be interested in the blower. How much shipped to 30606?

Originally posted by blckeclipse95
I may be interested in the blower. How much shipped to 30606?

Which blower, the heater blower?
I dunno, make me an offer. ;)

Originally posted by davo345

Originally posted by MrSlick I'll have pics tomorrow... I'd rather sell the motor complete... it runs perfectly. Lee.

That's fine. Complete motor, head, block, crank, pistons, etc, one unit, shipped as one unit, dropped right into engine bay. Price? edit: also, where are you located in PA? how far from blatimore? If you give me a great price, i would probably pick up the motor.

Howdy,

Baltimore isn't that far... like 3 hrs with traffic.. less without.
I'm about 30 miles south of State College. To the Md border takes like 1.5 Hrs.

Looking to get like $500 for the motor complete.
Let me know.

Lee.

Ok, I got pics of the car now:









It's not that bad really... runs and drives.
If anyone wants the whole car I'd sell it whole.
Has a good title too.

Originally posted by MrSlick

Originally posted by davo345

Originally posted by MrSlick I'll have pics tomorrow... I'd rather sell the motor complete... it runs perfectly. Lee.

That's fine. Complete motor, head, block, crank, pistons, etc, one unit, shipped as one unit, dropped right into engine bay. Price? edit: also, where are you located in PA? how far from blatimore? If you give me a great price, i would probably pick up the motor.

Howdy, Baltimore isn't that far... like 3 hrs with traffic.. less without. I'm about 30 miles south of State College. To the Md border takes like 1.5 Hrs. Looking to get like $500 for the motor complete. Let me know. Lee.

So the motor is in running order? Will I just be able to basically drop this in? No parts missing or anything? I dont want to have to purchase anything else besides this to get it to run.

If so, $500 is definately fair. Let me know!

Originally posted by davo345

Originally posted by MrSlick

Originally posted by davo345

Originally posted by MrSlick I'll have pics tomorrow... I'd rather sell the motor complete... it runs perfectly. Lee.

That's fine. Complete motor, head, block, crank, pistons, etc, one unit, shipped as one unit, dropped right into engine bay. Price? edit: also, where are you located in PA? how far from blatimore? If you give me a great price, i would probably pick up the motor.

Howdy, Baltimore isn't that far... like 3 hrs with traffic.. less without. I'm about 30 miles south of State College. To the Md border takes like 1.5 Hrs. Looking to get like $500 for the motor complete. Let me know. Lee.

So the motor is in running order? Will I just be able to basically drop this in? No parts missing or anything? I dont want to have to purchase anything else besides this to get it to run. If so, $500 is definately fair. Let me know!

Yupp the motor is complete. What you see in the pic is how it is still. I haven't pulled it yet.
You can have all the extras on the motor.
If you don't need the intake manifold I'd like to keep that for a project, but if you need it that's fine.

Yupp $500 complete picked up. ;)

I'll even take you for a drive in my beast. :)

Originally posted by MrSlick

Originally posted by davo345

Originally posted by MrSlick

Originally posted by davo345

Originally posted by MrSlick I'll have pics tomorrow... I'd rather sell the motor complete... it runs perfectly. Lee.

That's fine. Complete motor, head, block, crank, pistons, etc, one unit, shipped as one unit, dropped right into engine bay. Price? edit: also, where are you located in PA? how far from blatimore? If you give me a great price, i would probably pick up the motor.

Howdy, Baltimore isn't that far... like 3 hrs with traffic.. less without. I'm about 30 miles south of State College. To the Md border takes like 1.5 Hrs. Looking to get like $500 for the motor complete. Let me know. Lee.

So the motor is in running order? Will I just be able to basically drop this in? No parts missing or anything? I dont want to have to purchase anything else besides this to get it to run. If so, $500 is definately fair. Let me know!

Yupp the motor is complete. What you see in the pic is how it is still. I haven't pulled it yet. You can have all the extras on the motor. If you don't need the intake manifold I'd like to keep that for a project, but if you need it that's fine. Yupp $500 complete picked up. ;) I'll even take you for a drive in my beast. :)

PM sent :).

Originally posted by davo345

Originally posted by MrSlick

Originally posted by davo345

Originally posted by MrSlick

Originally posted by davo345

Originally posted by MrSlick I'll have pics tomorrow... I'd rather sell the motor complete... it runs perfectly. Lee.

That's fine. Complete motor, head, block, crank, pistons, etc, one unit, shipped as one unit, dropped right into engine bay. Price? edit: also, where are you located in PA? how far from blatimore? If you give me a great price, i would probably pick up the motor.

Howdy, Baltimore isn't that far... like 3 hrs with traffic.. less without. I'm about 30 miles south of State College. To the Md border takes like 1.5 Hrs. Looking to get like $500 for the motor complete. Let me know. Lee.

So the motor is in running order? Will I just be able to basically drop this in? No parts missing or anything? I dont want to have to purchase anything else besides this to get it to run. If so, $500 is definately fair. Let me know!

Yupp the motor is complete. What you see in the pic is how it is still. I haven't pulled it yet. You can have all the extras on the motor. If you don't need the intake manifold I'd like to keep that for a project, but if you need it that's fine. Yupp $500 complete picked up. ;) I'll even take you for a drive in my beast. :)

PM sent :).

You got PM back at ya...

OK,

Motor sold to davo345.

Everything else on the car remains.

5 Speed NVT-350 - $300 + shipping
95 MTX PCM - $100 shipped

anything else your interested in feel free to make an offer... ;)

*Bump*

Come on guys... help out a poor unemployed guy this christmas... buy some stuff from me. :)

Happy Holidays

hey how bout the extra injector harness for you know what?

Originally posted by turbo8u
hey how bout the extra injector harness for you know what?

That can be yours... :)
When you buying the you know what? ;)

Originally posted by MrSlick

Originally posted by turbo8u hey how bout the extra injector harness for you know what?

That can be yours... :) When you buying the you know what? ;)

as soon as i get money again, megasplooge will be in full swing

holidays = rape x(

I need the radio trim bezel, the rear roll stopper bracket if you still have it, maybe the driver's door handle, and how's your carpet look? lol....send me some prices :)

Originally posted by mastrcobb
I need the radio trim bezel, the rear roll stopper bracket if you still have it, maybe the driver's door handle, and how's your carpet look? lol....send me some prices :)

I have the radio trim bezel from another car. ;)
I have everything else.
Make me some fair offers.

to be perfectly honest with you, I have no idea what's fair....post up some pics of the carpet..colors ect. and you can pm me some prices shipped to 26104 if you will please

MrSlick,

Did you get my email?

-Jose

Originally posted by jose23
MrSlick, Did you get my email? -Jose

Yes, I replied to it earlier. Let me know if you didnt get it.

Lee.

I really need the long reverse thread idler pulley bolt or even the whole assembly so i can fix my ac/ps. ill pay 20 shipped for the bolt, donno 4 whole assembly.

Dave-


The Darkness!

Lee,

I didn't get that reply.

-Jose