60mm Jeep throttle body and 95-99 eclipse upper intake
manifold modified (port matched to fit new Jeep throttle body diameter and AIS air inlet blocked) to fit a 2nd generation non-turbo eclipse. Comes ready to install with upper manifold gasket, EGR tube gasket, purge solenoid to throttle body vacuum hose adapter, modified upper manifold and jeep throttle body pre-assembled.

Prices:
1)If you provide all of the parts, excluding gaskets, (basically the stock upper manifold, TB and Jeep TB): $100

2) If you provide us with your stock upper manifold and TB, but we have to provide the Jeep TB the cost will be $175

3) If we have to provide all the parts the cost will be $275 (that includes $100 core charge). Once we get your stock parts we will refund you the 100 bucks. READ: Your stock pieces must be in useable condition, if they are not you will have to pay for return shipping and we will keep the core charge.

Turn around time is expected to be about 2 weeks. It may go faster than that, but it should not be any longer than that. Please email all of your requests to tdaug@yahoo.com or post it and any questions you may have here. We will accept paypal, but if you use a credit card expect to be charged for the extra charge we will incur. We will also accept money orders, email me and I will send you my address.

I think that is about it, once again if you have any questions let me know.

Will you guys be offering a port matching option if I send the lower intake section also?

well my buddy is the one doing the porting and he said that all he would be able to do is match the openings to the gasket and doesnt have the necessary equipment to get all of the runners. Because of that he would rather not do that. So in short no.

Hey. I'm interested. Umm... email me more info at rcdesigner@aol.com

Hey man, I sent you an email, but im not sure what info you want. Reply to the message with any questions you may have and Ill reply asap.

Sounds good Bro. Do you have any numbers on this mod. HP,Torgue? How about a video. That would be cool to see it in action. Just a thought.

no we dont have a video of my car making the sound, but that is a really good idea. As far as numbers, some guys in my car club and I will be heading out to the track on the 25th and Im hoping my times will drop from the current 15.7 to mid to low 15's breaking the current record of 15.5

I also am very interested. How do you complete the transaction? I would have to do the $275 deal and then send you my stocker parts? Do you take Paypal and then refund the money? or what? Let me know because I am somewhat interested as soon as you find out some numbers. Also what about driveability? Will I throw a CEL?
Thanks for any info?
-Chris b.

If you were to send me the 275 now, we would start working on your set up now and when it is completed we send the finished parts to you so you can install it. Once you install our pieces you would then ship us your old uppermanifold, and TB. Once we recieve it, we will paypal your $100 back. My paypal account is tdaug@yahoo.com

Also I did get a CEL when I first installed it, but that was taken care of by disconnecting the battery for 15min. Driveability with it is great. I have no problems getting around town. In fact it is a lot more fun since I have so much more power at part throttle

I heard that it is possible to port out these Jeep TB's to as much as 65-68mm.
Would that just be TOO much? Or do you think it's worth a try?
I know that with anything that you do, there is a danger of over-doing
it. :) But if you could....just imagine the gains....what are our TB's...something like 50 or 52mm stock right?

yeah ours are like 52 or 53, and I would say that without forced induction you should hold off on 60,

will combining this with the hahn kit will be alright?

of course, all it is is a larger TB which allows more air into your engine. The TB does not change its position in the engine bay so everything will work, from intakes to turbo kits.

Also whenever you guys order, let me know what year car you have. On the upper manifolds 95's have a different fitting than the 96+ manifolds, and we just need to know which year your car is so that we include the correct one.

wow this sounds really good. do you have any pics?

no, not at this time, but my car club, Carolina DSM, has a meet on the 19th and we always have like 2 digital cameras present. Ill take some pics and post them up. It looks really cool sitting in the engine bay, hell we even polish the units as best we can so they are chrome like.

bump

how long do you guys plan on doing this

we will probably be doing it for a while, but it depends on how many people are really interested and arent going to send me a money order and then ask for it back (it happened).

well im really interested, i have money, but im tryin to save for a laptop. maybe sometime around christmas is when i could pay you for it. still plan on making them then?

what if we provide just the stock TB from the eclipse? how much would that make it?

I think you already lnow that I'm interested....and unfortunately broke at the moment....wouldn't be able to let anyone see me under the hood of my car again...cause they know that means I spent $$$ I don't have..hehe

soon though

damn damn damn i gotta get this done

let me know when you're about to/considering ending the service and I'll have money/my shit on its way asap... I'm just... negative uhh.. about $2000 right now so its not gonna be for a little while I hope.. !!

yeah, its highly likely that we will continue making them atleast until a little after christmas.

Polished, Sweet!!! I am interested, you so have mail!!

". . .after christmas. . ."
cool, just enough time to crunch up some cash.

i think a lot of people are trying to get the money together. I realize that most of you guys cannot live with down time and have to shell out the 275. For that reason we will probably sell them a little longer.

bump....was about to go out.....saving $$$

throwin a BUMP

any updates??? you were talking about a dyno run earlier....any new news?
more importantly....are you still making them?