Well Doug and I are at it again, Im not sure if you guys are interested in this mod at all, but it does make a difference. Here is a description Doug wrote up. It will cost 50 bux for the work plus a 50 dollar core charge. So that totals 100 bucks upfront, and like with the jeep TBs we sell we will refund you the 50 dollar core charge once we get your stock TB back.

I'm boring just the housing before the throttle plate. I do not change the diameter at the plate itself. The ported housing is nearly big enough to drop the stock plate all the way through it. Naturally doing this by hand without an accurate machine to do it will have some variances. All in all it's only fifty bucks shipped. It's cheap, it's something alot of people are already doing only they don't have the tools to do it as well as I feel I can. In all honesty if you have the money to buy one with both a ported housing and a larger throttle plate I would recomend it. However, if you'd like a small upgrade for a small amount of change... (relatively speaking) this is a known acceptable route.

you still have any of the jeep ones available?.....still interested.

yes, we are making them, we are going to go through the people we have on our waiting list first though

oh oh I'm very interested. I just got done port and polishing my head gotta take advantage of it :) I got my TB out of the engine right now so I could just send it you. Do you use a lathe? What do you bore it to? 55 or 57mm?

no, no lathe involved, they are hand ported. Ill check with Doug to see if he has measured one of the TBs and get back to you on there size

are you not doing the intake manifolds this time? good luck man... and anyone wondering if this is a good guy.. i can valge for it :thumbsup

AM i still on your list for the jeep tb setup?? I know I emailed about it awhile back to have u put me on ur list. Just havent heard back.