| Go back to previous topic | | Forum name | 2GNT Buy / Sell / Trade (BST) | | Topic subject | 2g 420a head, and cams, cam gears, intake manifold. | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i16&topic_id=59440 |
59440, 2g 420a head, and cams, cam gears, intake manifold.
Posted by Blitzsuperstar, Oct-28-04 10:39 AM
if you need any of these parts e-mail me or call me..
head
cams
cam gears
intake manifold
|
59446, RE: 2g 420a head, and cams, cam gears, intake manifold.
Posted by ner947, Oct-28-04 12:04 PM
All factory stuff? Is the head bare, or does it include valves?
|
59466, RE: 2g 420a head, and cams, cam gears, intake manifold.
Posted by Blitzsuperstar, Oct-28-04 05:37 PM
can include valves... and everything... up to you.
|
59524, RE: 2g 420a head, and cams, cam gears, intake manifold.
Posted by ner947, Oct-29-04 12:22 PM
Ok. I'll let you know sometime early next week. If you sell it before then, don't worry about it, but I have to take my head off to see how toasted everything is. If the valves are broken and everything is fine (or reparable), then I'm going to buy a new set of 1mm oversized valves from Howell and have them installed. If the head is gone, that would really suck because it was ported - in that case I'll buy yours with the valves.
|
59529, RE: 2g 420a head, and cams, cam gears, intake manifold.
Posted by Blitzsuperstar, Oct-29-04 01:02 PM
alright, sounds good..
i work at a machine shop... if you want it fully rebuilt.. and what not.. talk to me and i'll see what i can do.
e-mail
blitzsuperstar@yahoo.com
phone
479-466-1775
|
59563, RE: 2g 420a head, and cams, cam gears, intake manifold.
Posted by Blitzsuperstar, Oct-30-04 08:45 AM
t
|
59568, RE: 2g 420a head, and cams, cam gears, intake manifold.
Posted by 2point4, Oct-30-04 09:50 AM
hey ner947, if the head your pulling is toast can i have it? i start a job at a machine shop on monday/01 and will most likely be able to restore it, unless it cracked in half or something like that. let me know...chirs
|
59570, RE: 2g 420a head, and cams, cam gears, intake manifold.
Posted by 96rs-t, Oct-30-04 09:58 AM
how much for that head....???
|
59584, RE: 2g 420a head, and cams, cam gears, intake manifold.
Posted by Blitzsuperstar, Oct-30-04 03:05 PM
$240 (washed)... fully rebuilt.. $340.
a rebuilt one will usually run around $400..
i'm open to offers.
|
59659, RE: 2g 420a head, and cams, cam gears, intake manifold.
Posted by Blitzsuperstar, Oct-31-04 06:10 PM
tt
|
59756, RE: 2g 420a head, and cams, cam gears, intake manifold.
Posted by Blitzsuperstar, Nov-02-04 05:12 AM
taking offers....
| |