I have 3 complete jeep TB's. They are 60mm and a bolt on. My TB's come with a gasket and a plug for the little hole.

The gasket is custom cut.

The plug is a vac cap that fits perfectly and you use some silicone to hold it in place.

The TB is completely moded for 2gnt. Both sensors are included and all modifications to the TB are complete.

To Install all you do is:
1)Bolt it on
2)Plug the little hole with the plug provided
3)Adjust the throttle cable on the manifold
4)Hook up both sensors
and your all set.

I have had mine on for about 7 months with no problems. This is a great performance mod.

I will get some pics up soon.

The cost is $200 + Shipping (USPS w/insurance).

If interested you can email me at: Talon95Stang@cs.com

There is no core charge, nor do you have to send me your TB.

The price is final.

Thanks talon95stang@cs.com

There are 2 TB's left. The first 2 to pay get them.

I'm not making anymore so these are the last 2 I will have.

Here is the pics of the TB's

http://www.keithurbanfans.com/larry.html

2 questions.....you can email your reply if you like, I'm not online much.

1.....do you know if this different sized throttle body would interfere with me fitting up a HRC stage II kit in the future?.....are they compatable?

2....I was told that the jeep TB either will not work if you have cruise control...or that cruise control won't work with the jeep TB...I don't remember which case it was that I was told. Is this true?



~E~ 1999gs

It should be fine with your HRC Stage 2. The only thing is you might have stretch you clamp around the Jeep TB.

And cruise control works with the Jeep TB.

Just as an update:

I have 2 left at $200 + $15 shipping. You can email me at: Talon95Stang@cs.com

again, these are the last 2 I will ever have so get them while you can.

I still have 2 of these. You can email me an offer at:

venomtalon@aol.com