i need a star downpipe ....i know i can get it made but wanted to see if somebody on the board had a fairly good condition one.
thanks

I have one but you would need to weld the 5 hole flange on it and an O2 bung. I cut these off to use on my 3" DP. The dp is got some rust on it but i just put a new flex on it (cheap style from RRE) and the cat flange is still there. Also needs the flange for wastegate which you would want to reposition for yours anyway. Its free just pay shipping.

Terry
Plainfield IL 60544

96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

By the way mine does not hit the oil pan...i rewelded the pipe so it fits more accurate.

Terry

96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

THANK U SO MUCH!!! email on shipping costs to zip code 22042 and i will send u the money for shipping
my email address is shakilkayani@aol.com

u still there

I'm also looking for one...lmk....tks
Mike

Originally posted by mlsbka
u still there

Ok sorry i dont check my posts that often.....Anyway if you want it shipping is 15.00 because of the size of the box mostly. Remember the DP doesnt have the turbo flange or wastegate flange or o2 bung anyomre....those will need to be purchased and rewelded.......i dont want you to get it and think it bolts right on. You are basically getting the complete pipe that has been cut and rewelded to fit the oil pan ect correctly. Its fits like a gem on your finger. I needed the flanges for my 3" Dp.

Terry



96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

I HAVE A STAR DOWNPIPE THAT HAS A FLEX SECTION WELDED IN IT FOR SALE..
its a good DP, had the flange and o2 bung in it, plus the added flex section, it does NOT hit the oilpan.

can u send me a pic at shakilkayani@aol.com

I dont have a digital camera so no i cant. it was yours for the cost of shipping. if you want bolt up buy justins listed above. it goes in my garbage mon morning as planned. I am not going to bother with this. I cant believe giving someting away free gets nit picked.

Terry

96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)