I am having 2.5" Mandrel Bent downpipes made for the 2gnt cars with a Hahnracecraft turbo kit on them. They are going to be race quality. They will be a direct bolt on. They will be done next Tuesday as my car is being having the prototype built and tested now. They will be made of high quality aluminized steel. I will have pics late next Tuesday and will be shipping them out on Wednesday or Thursday. The more I have made the cheaper as the most expensive is the prototype. So we can do it like a groupbuy. Please contact me with any questions, and tell everyone with a HRC Kit.

5 People $450.

10 People $400. And Cheaper if we get more people.

Mike Maffuccio 413-822-4946 (leave message if I dont answer)
esseclipse@aol.com

$450 is a bit steep for a downpipe.

First off I dont think it is too steep for what you are going to be getting. Second the reason they are that price is because I had to pay $1000. to have the prototype made. After that I can buy each one very cheap. You have to relize what these are....they are going to be factory like quality with factory brackets, flex section, o2 housing, and high quality steel,gaskets and flanges. It will be a direct bolt on and have a sloted flange for ez installation at the turbo. I have 3 people who want them already so if I can get 7 or more people the price will be even cheaper. If we get over 10 people the price will drop.

$1000? I was working on a deal to get custom manifolds made...the initial was gonna be $600 and each after that would be $250....I don't see how your downpipe is so much harder than that manifold that you would need $1000 worth of time and material.

Yea seems a bit steep for a downpipe. I had a custom 2.75 in one made for my car cost $220 +25 for a laser cut flange.

LOL.... You don't seem to understand the matierials used and the quality of these downpipes. These are MANDREL BENT ALUMINIZED downpipes with factory like flex section, o2 port and brackets. They are direct bolt ons with gaskets. They are not some junk steel from midas. And if we get enough people to want them I can sell them for around $350-$375. Kooks Custom Headers is making them. These are the real deal. I have 4 people who definitly want them and many inquarys. The more people I get the cheaper they are.

We need 5 more people and I can sell them for $325 each. The more people we get the cheaper.....email me or give me a call with any questions. esseclipse@aol.com

Post pics when you get them.

I could see paying 400 IF they are coated.

I will have pics up on Tuesday night or Wednesday Morning. The Pipes will be done then and I can give more specifics and pics. I only need 5 more people to want one and I can sell them for $325. plus shipping

mike, i told you earlier i doubt anyone will be stupid enough to pay 350 for a 2.5 inch dp. you can get a custom one made for 200 at a average muffler shop. im not knocking your idea but i bet if you drop the price down about 250 shipped, youll make some money. you payed 1000 for a dp, i hope you supplied the k-y jelly cuz you just got your asshole ripped out :rolleyes

AIR RIDE SUSPENSION UP FOR GRABS.
Dwayne H
A.K.A D-low
2001 SUZUKI GSX-R>>BLACK/RED
YOSHI SLIP ON, FC COMMANDER STAGE 3 JET KIT.
Daily Grind: 1994 B18c1 powered Black civic coupe. h&r springs, 16 inch mugen knockoffs, CAI, rsr catback. just a beater i picked up for 4200.
1997 mitsubishi gs
"FRANKN4"
Fully built motor, SOON TO BE FRANKED THA FUCK OUT,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

Just some more info. The Downpipes will be made of 16 gauge Aluminized steel (Aluminum Coated). The Downpipe will be two pieces. Email me with any questions esseclipse@aol.com or call me at 413-822-4946 Mike
**WIDE BODY PLEASE SEND ME PICS OF THE SHIT DOWNPIPE YOU HAD MADE. SOUNDS LIKE YOUR A DUMB ASS AND YOU HAVE NO IDEA OF THE QUALITY OR WHAT THESE PIPES ARE MADE OF. THEESE ARE NOT MIDAS JUNK, THEY ARE ALUMINUM COATED HIGH QUALITY DOWNPIPES WITH FACTORY FLANGES AND FLEX SECTION MADE BY KOOKS CUSTOM HEADERS. ITS TOO BAD WE HAVE PEOPLE ON 2GNT.COM THAT DONT SUPPORT EACH OTHER ESSPECIALY WHEN THEY HAVE NO IDEA WHAT THEY ARE TALKING ABOUT. WE ARE SUPPOSE TO HELP EACH OTHER.**

One more thing widebodied.....is your downpipe Aluminum Coated? is it Mandrel bent? Do you know what that is? Aluminum coated steel will last 5 times longer than just standard mild steel. Mandrel bent pipe is far superior to standard bent pipe.

We have enough people so I can sell $325.each plus shipping. They are made by Kooks Custom Headers they are 2 Piece, 16 Gauge Aluminized Steel (Aluminum Coating), Mandrel bent, 3/8" Flanges, Stainless Steel Flex Section. High Quality Gaskets will be included. Pics will be up Tuesday Night and I will be shipping them out starting Wednesday. Send me your email address to recieve pics and any additional info.

>Just some more info. The Downpipes will be made of 16 gauge
>Aluminized steel (Aluminum Coated). The Downpipe will be two
>pieces. Email me with any questions esseclipse@aol.com or call
>me at 413-822-4946 Mike
>**WIDE BODY PLEASE SEND ME PICS OF THE SHIT DOWNPIPE YOU HAD
>MADE. SOUNDS LIKE YOUR A DUMB ASS AND YOU HAVE NO IDEA OF THE
>QUALITY OR WHAT THESE PIPES ARE MADE OF. THEESE ARE NOT MIDAS
>JUNK, THEY ARE ALUMINUM COATED HIGH QUALITY DOWNPIPES WITH
>FACTORY FLANGES AND FLEX SECTION MADE BY KOOKS CUSTOM HEADERS.
>ITS TOO BAD WE HAVE PEOPLE ON 2GNT.COM THAT DONT SUPPORT EACH
>OTHER ESSPECIALY WHEN THEY HAVE NO IDEA WHAT THEY ARE TALKING
>ABOUT. WE ARE SUPPOSE TO HELP EACH OTHER.**

peice of shit dp huh, i guess that pos dp gets me full boost by 2900. but thats not impressive huh.:rolleyes . and i guess thas why ive had the same one for over a year and the color has yet to fade or chip,or oxidize. and yes, it is mandrel bennt, and yes it is aluminum. dont try to school me on this, because ive been in this game since 98'. i can tell your a newbie to this, i mean you come on, you payed 1g for a downpipe. lol :nono. who would want to do buisness with you after you made yourself look like a jackass in your on thread. anyways im threw with this rookie, if you guys want a "quality dp made", mandrel bent, and aluminum, give me a pm, i can assure you that it wont be over 150 without shipping. and yes this a 3inch dp, not a little 2.5. and mike, consider your thread hijacked. and btw, who the fuck is KOOKS custom headers, you keep saying that like its a big company, must be if they charged you 1000 bux for a prototype 2.5 dp. bbbbbaaaaawwahaaaaaaaaaahaaawaaaaaaaa. oh and mike, holla me if you want a quality 3.0 dp. ill hook you up, you get a hella lot more response you would out of this than a .25inch difference from hahns factory spec. 1000 buxx for .25 inches, the guys are gonna trip balls after i tell them this in the morning.

AIR RIDE SUSPENSION UP FOR GRABS.
Dwayne H
A.K.A D-low
2001 SUZUKI GSX-R>>BLACK/RED
YOSHI SLIP ON, FC COMMANDER STAGE 3 JET KIT.
Daily Grind: 1994 B18c1 powered Black civic coupe. h&r springs, 16 inch mugen knockoffs, CAI, rsr catback. just a beater i picked up for 4200.
1997 mitsubishi gs
"FRANKN4"
Fully built motor, SOON TO BE FRANKED THA FUCK OUT,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

OWNED!

http://kookscustomheaders.com/ check it out. Widebodied please post pics of your downpipe. I will have my pics posted by Wednesday at the latest. If you have been doing this since 98 then you are a joke, you would think someone that has been doing this for 5 years would know a little bit more and support their fellow 2gnt members. Oh and the smiley faces are a nice touch in your responses.

>http://kookscustomheaders.com/ check it out. >

big deal
>>Widebodied
>please post pics of your downpipe. I will have my pics posted
>by Wednesday at the latest.

good for you, i dont have acess to a dc, if i did, i would have pics up of my car

>> If you have been doing this since
>98 then you are a joke, you would think someone that has been
>doing this for 5 years would know a little bit more

what dont i know????? you havent asked me shit, imma joke, i payed 1000 for a complete 3 inch exhaust system, dp, race cat, apexi- n1 canisters. all aluminum and mandrel bent.
u payed 1000 bux for 2.5 inch dp, .25 inches up from hrc specs.and trying to sell them for 325-450. whos the joke? or should i say idoit.


>support their fellow 2gnt members.

i do, ask anybody on this board, but im not gonna let some rookie rip people on 2.5 inch dps for 400. just because its a kooks custom dp. lol. when i know they can do much better.

>>> and the smiley faces are
>>nice touch in your responses.

thanks tthats why they were added. ;)

MIKE = OWNED:D

AIR RIDE SUSPENSION UP FOR GRABS.
Dwayne H
A.K.A D-low
2001 SUZUKI GSX-R>>BLACK/RED
YOSHI SLIP ON, FC COMMANDER STAGE 3 JET KIT.
Daily Grind: 1994 B18c1 powered Black civic coupe. h&r springs, 16 inch mugen knockoffs, CAI, rsr catback. just a beater i picked up for 4200.
1997 mitsubishi gs
"FRANKN4"
Fully built motor, SOON TO BE FRANKED THA FUCK OUT,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

How does your DP connect to the Hahn one?


________________________________________________________________________________________
Car Sold


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

This is what 225 bought me. It may not be pretty, but it works great. Im not knocking what your selling, just defending the quality of my stuff.

talk is cheap...and a picture can save your ass right now. Preaching on the internet about a 400 dollar dp isnt exactly like selling a dead parrot to a blind kid. You shoulda been better prepared with pictures and specific information. And whats this about "supporting 2gnt.com" Will you support my traffic tickets or my car payments? Come on man help a 2gnt.commer out! :rolleyes yea...right thats what I thought.

:thumbsup Good Luck :thumbsup

joe

i'll jump in on the deal for $300 shipped if you post pictures of the thing, installed on a 2gnt with a hahn kit.

i've seen my share of group buys that have fell through, (cough NER cough) and i'm reluctant to jump in on one becuase it seems as if people are always getting shafted.

I'd REALLY like to see pics of this DP actually MOUNTED in the car. There is SO much to avoid in terms of A/C lines, a water pipe, and just the general ability to come straight down off the turbo whilst maintaining 2.5". So please post your pics with this in mind.

By the way, I think all muffler shops use aluminized steel as their metal of choice when making exhausts. The aluminization is no absolutle preventer of rust, but it certainly help so stave it off for a while.

We all need to chill out on the tempers, or there's not going to be a chance for people to post their silly "in before the lock" pictures.

Look out for pics tomorrow night. Send me your email address if you want me to send the pics directly to you. esseclipse@aol.com

i Agree with Jason, Post the pic, then we can talk...

I along with many others will be interested, once we see the product on the car.