all parts needed for a 420a Non turbo motor

Pistons=JE,Wiseco,Ross whatever brand name just as long as it will work in a 420a with eagle rods

Stock rods and pistons with rings,wrist pin(in case i cant find the aftermarket pistons)New or Used less then 40,000miles
Upper and lower gasket kits.
Clevite Main Bearings.
Clevite rod Bearings.
Oil pump.
Water pump.
Dealer Timin Belt.
Oil Pan.

LMK if you have any of this stuff.

i have JE 8.8:1 .20 over pistons and rings, eagle h beam rods, and a water pump, will sell it to ya for $825 shipped... let me know asap, my e-mail is mikey001015@aol.com

i have an oil pan and even a rear main seal if you want it, not a bad idea to replace it. 55 shipped for both, 40 shipped for the oil pan.

Originally posted by EclipsedChef
i have an oil pan and even a rear main seal if you want it, not a bad idea to replace it. 55 shipped for both, 40 shipped for the oil pan.

i was think along the lines of $25 shipped for the pan as one just ended on ebay for that but i was gone and missed it.

wiesco piston inculdes rings pins and coated skirts high or low compression $395 NEW
oil pump $80 NEW
eagle rods $325 NEW
main bearings $60 set NEW
rods bearings $6ea NEW
oil pan $15 used

Originally posted by CV4
wiesco piston inculdes rings pins and coated skirts high or low compression $395 NEW oil pump $80 NEW eagle rods $325 NEW main bearings $60 set NEW rods bearings $6ea NEW oil pan $15 used

i can get Clevite Rod Bearings for $35 new
and Clevite main Bearings for $45 new at howell.

is dat $15 shiped for the oil pan? if so then ill take it.

let me check on the mains and rods I know I can beat howell
oilpan is plus shipping

Originally posted by CV4
let me check on the mains and rods I know I can beat howell oilpan is plus shipping

if you can do $20-25 shiped then ill take it,my zip is 37620

Originally posted by CV4
let me check on the mains and rods I know I can beat howell oilpan is plus shipping

sorry but i beleave mine could be patched for less then that.im sorry if i seem like im tryin to low ball but im very tight on money and every $1 counts when you are.But thanks tho

look I'm going to be in bristol TN this weekend if you want i can bring it and save the frieght. I can possable do some thing on the pistons and the bearings as well. if you have an IM hit me up if not email me. the weekend of the july 8-10

For the NOPI race

hey thats great ill take the oil pan then aslong as its for a 420a and is in good shape.im email you my IM names

its yours

Originally posted by Mikey001015
i have JE 8.8:1 .20 over pistons and rings, eagle h beam rods, and a water pump, will sell it to ya for $825 shipped... let me know asap, my e-mail is mikey001015@aol.com

i have a set of eagle rods, how much for the pump and pistons w/rings? have either ever been installed?

35 shipped for the oil pan, shipping is close to 15 bucks and 20 for the pan itself.

i have the stock manifold cleaned. If you need one.