okay, you choose how many ports you want. these are pics of the one i made for me.
i will do yours to order, with some limitations. i only have enough for 5-7 peices (depending on length) at this time.

asking $30.00 shipped to you!




here is a link to the first posting about them with a bit more info.
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=16&topic_id=45226&mesg_id=45226&page=

I had some questions in that first post.

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild.
*Done with Project: Boost

Doesn't look like it'll flow very well. How is it bored on the inside? Or is it an open block?

Originally posted by xEclipsE RaceRx
Im interested, I just want to understand it more. Would you hook it up to like the brake boost line on the manifold? I have tees out the ass right now hooked up to my 3 lil oem ports on the back of the manifold. Does this one big "tee" act as a downside any anyway since its only hooked up to one port on the manifold? But I guess the large 1/2" size cancels that out and makes up for it huh? If I could just get those answered a feel a lil more comfortable, I'll paypal you for one? BTW whats your paypal addy Tim?

sorry, missed this on the other post.
yea, the brake booster line would be the best place for it. theres no downside to running a tee. if ya think about it from the standpoint of however many T's you already have off the stock small ports and then any T's you may have off those lines... well, theres no downside to having a bigger dedicated vacuum port to run everthing off of.

Originally posted by dougie2
Doesn't look like it'll flow very well. How is it bored on the inside? Or is it an open block?

im not sure i understand what you mean? its a vacuum manifold so "flow" doesn't really play a part of it. you get the same vacuum out of a 90 bend as you would a straight. its drilled thru and the ports are drille ddown into that. is that what
your asking?


paypal is t_hawkins@hotmail.com

let me know how many ports you want.

I'm asking if the "bends" are a radius or a corner.

cornered. its drilled out.

Im pretty sure he means this:






5 second photoshop. I made this based on the description above, never hurts to have a visual. I didnt angle the lines to ease confusion.

yes, yes, thank you!