Go back to previous topic
Forum name2GNT Buy / Sell / Trade (BST)
Topic subjectFS:Hi-Stall Torque Conv',Built ATX + More - LOWER PRICES 6/3
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i16&topic_id=45157
45157, FS:Hi-Stall Torque Conv',Built ATX + More - LOWER PRICES 6/3
Posted by RyaN95i4, Jun-03-04 06:06 AM
06/03 EDIT -- I need this stuff gone so I Lowered the prices on EVERYTHING still available.


For Sale -

I have recently done a 5spd swap, so I no longer have any use for the following parts:

ERT's Track Master High Stall Torque COnvertor - This is a Hughes torque convertor w/ a rated stall speed over 3000 rpm.
Converter is brazed w/ a strengthened sprag, special cut stator, and full needle bearings front and rear.
This will be the last torque convertor you will ever need. ~3500 miles on it, and only a 2-3 hard launches.
$500 new, $225 pickup, $250 shipped for slightly used unit


Built a604 for the 420a - Raybestos Race Clutch Packs and Plates, Aluminum accumulator pins,
Blue Plate Special gaskets and softparts, Fairbanks Shiftkit.
Tranny has ~20K miles on it, only 1/2 that was while I was turbo'd.
This originally was a $3,000 tranny, but the OD clutch hub needs to be replaced.
All upgraded parts are still in excellent condition, the friction materials still grab awesome, even at 18psi.
Unfortunately, the gear hub on the OverDrive Clutch hub is sheared off and needs to be replaced to take advantage of this trans.
I was quoted $300 for repair.

My loss is your gain - $250 OBO (I just need it out of my garage), local pick up only please
(Gainesville, FL - I would be willing to meet up w/ someone 1/2 way within reason)


If someone is interested in the built atx WITH the high stall torque convertor, I will sell them together for $450.
Again, local pick up only, but I would be willing to meet 1/2 way within reason.


OEM Replacement Torque Convertor - this is a stock replacement, stock stall speed torque convertor.
~15K miles on it, still worked perfect when removed - $35 pickup, $60 shipped

If someone is interested in the built atx WITH the stock stall torque convertor, I will sell them together for $275.
Again, local pick up only, but I would be willing to meet 1/2 way within reason.




95 automatic, I4 engine computer - $35 pickup, $45 shipped

95 automatic, I4 transmission computer - $35 pickup, $45 shipped


Automatic shifter assembly, includes the shifter linkage - $15 pickup, $20 shipped

Automatic brake pedal assembly - $10 pickup, $15 shipped

Automatic shift knob, polished w/ carbon fiber trim - $5 pickup, $8.50 shipped - SOLD




I also have a few other parts for sale

Avenger center console, includes HVAC bezel, cruise contrl bezel, center a/c vents, dash-door vents, and ebrake boot, all inserts painted pearl blue
- $30 pickup, $40 shipped

420a stock exhuast manifold - $15 pick up, $30 shipped

Brake fluid resevoir - $5 pickup, $8.50 shipped

Brake Booster - $15 pickup, $20 shipped



I think all these prices are fair, but I will entertain all offers so dont be shy to try and work out a deal, especially if your looking for multiple items.

Paypal, Money Order and cash accepted.

My paypal is avengr1995@aol.com

Thanks, and feel free to ask any questions
-Ryan
45239, RE: FS:Hi-Stall Torque Conv',Built ATX + More - LOWER PRICES 6/3
Posted by RyaN95i4, Jun-03-04 07:53 PM
<bump>
45302, RE: FS:Hi-Stall Torque Conv',Built ATX + More - LOWER PRICES 6/3
Posted by RyaN95i4, Jun-04-04 04:34 PM
No one wants to go fast w/ an atx? :shrug
45336, RE: FS:Hi-Stall Torque Conv',Built ATX + More - LOWER PRICES 6/3
Posted by ajna_star, Jun-05-04 06:53 AM
i might be interested in the AT, hit me up on aim -> ajnast4r
45407, RE: FS:Hi-Stall Torque Conv',Built ATX + More - LOWER PRICES 6/3
Posted by RyaN95i4, Jun-06-04 12:28 AM
Originally posted by ajna_star
i might be interested in the AT, hit me up on aim -> ajnast4r


My email is avengr1995@aol.com -- ill try and catch you on aim, but I am not on aim very often - my aim name is RyaN95i4

45420, RE: FS:Hi-Stall Torque Conv',Built ATX + More - LOWER PRICES 6/3
Posted by SILVERNT, Jun-06-04 07:17 AM
someone buy that converter, its a very very beastly unit
60178, RE: FS:Hi-Stall Torque Conv',Built ATX + More - LOWER PRICES 6/3
Posted by pato19, Nov-07-04 05:16 AM
what year is your transmission
60182, RE: FS:Hi-Stall Torque Conv',Built ATX + More - LOWER PRICES 6/3
Posted by HipHop615, Nov-07-04 06:32 AM
Holy Crap this post is old




Turbo8u - "Iv'e never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Parts 4 Sale:

NEW C-Wings Carbon Fiber Double Sided TD3000GT Hood - $399 Shipped OBO (Problem with Underside)
VIS Xtreme GT CF Hood - $399 Shipped OBO
Urethane Blitz Front (Painted OEM White) - $199 OBO
Urethane Blitz Rear (Painted OEM White) - $199 OBO
GTP Blitz High Side Skirts (Painted OEM White) - $120 OBO
Single 12" Sub Box - $15 OBO
95 Heater Core - $35 Shipped OBO
StreetGlow Stuff - $75

Parts I Want/Need:

KYB AGX Shock (NEED ASAP)
Blue AEM Cam Gears
Levoc Auto Shifter
Polished/Chromed Valve Cover
Power Door Panels/Inserts (ANY COLOR)
Trunk Panels Behind Tails (ANY COLOR)
In-Dash Motorized Screen (Alpine, Pioneer, Eclipse, Clarion, Panasonic, Sony Etc.)

Just Ask Q's & Make Offers (IM IN SO. CALI) HipHop615@yahoo.com