Hey guy's I still have my motor I built for the "beast" up for sale. I would prefer someone in Fl due to the size and shipping being way too much cash. Here is what is included/done.
Bottom end bored .20 over fitted with JE pistons with a 8:8.1 compr JE rings, Knife edged and lightened crank (3 lbs of metel removed)Sheaved oil pump to bump up oil preasure, Custom Seinze piston Rods, Clevitte bearings, Tapped oil pan (new) for Turbo dump line.
The motor was built and has yet to be installed, done by a local shop that has several 9 second cars under their care so the work is that of the best.
As for the top end goes, I have a custom 4" sheet metel intake manifold made to bolt up to a 75mm mustang throttle body (now has a plate custom made to fit the stock one that can be removed when desired). Powder coated red valve cover,Stage 3 Ported and pollished head, Custom Web cams and Unorthadox cam gears. Custom made Stainless steel 2mm oversized valves,Crane Titanium retainers kit with PT cruiser upgrades. Custom sloid steel Mounts for the motor (both). Oh I also have two sets of plug wires, one is the Nology Hot wires and the others are Accel that came with the set of Accel motor cycle coils. Please I would like to sell this motor, so please get the word out. NOTE: The head is not bolted on the bottom end so the timing belt will have to be set, aside from that this is a great motor to boost the F**** out of. The price for the bottom end is $850.00 and if you want the rest of the motor (top end) then and $300.00 Firm. I will not just sell the head but I will sell just the bottom end if desired. Thansk for the space, Ray

Someone better jump on this thing NOW! That's one hell of a deal! Thanks for the great deal on the torque converter Ray... I hope you're not done with 420A motors for good.

Who did the head work and made the sheet metal intake manifold? What did just the manifold run? Send me a PM.

>Hey guy's I still have my motor I built for the "beast" up
>for sale. I would prefer someone in Fl due to the size and
>shipping being way too much cash. Here is what is
>included/done.
>Bottom end bored .20 over fitted with JE pistons with a
>8:8.1 compr JE rings, Knife edged and lightened crank (3 lbs
>of metel removed)Sheaved oil pump to bump up oil preasure,
>Custom Seinze piston Rods, Clevitte bearings, Tapped oil pan
>(new) for Turbo dump line.
>The motor was built and has yet to be installed, done by a
>local shop that has several 9 second cars under their care
>so the work is that of the best.
>As for the top end goes, I have a custom 4" sheet metel
>intake manifold made to bolt up to a 75mm mustang throttle
>body (now has a plate custom made to fit the stock one that
>can be removed when desired). Powder coated red valve
>cover,Stage 3 Ported and pollished head, Custom Web cams and
>Unorthadox cam gears. Custom made Stainless steel 2mm
>oversized valves,Crane Titanium retainers kit with PT
>cruiser upgrades. Custom sloid steel Mounts for the motor
>(both). Oh I also have two sets of plug wires, one is the
>Nology Hot wires and the others are Accel that came with the
>set of Accel motor cycle coils. Please I would like to sell
>this motor, so please get the word out. NOTE: The head is
>not bolted on the bottom end so the timing belt will have to
>be set, aside from that this is a great motor to boost the
>F**** out of. The price for the bottom end is $850.00 and if
>you want the rest of the motor (top end) then and $300.00
>Firm. I will not just sell the head but I will sell just the
>bottom end if desired. Thansk for the space, Ray

hmmm, sounds like a deal to me, let me figure in shipping to the 24551 area code, and ill get back to you, you have mail alos.....



HRC SUPER 16G FOR SALE BRAND NEW,, 800 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

would this motor be streetable tho?

im in south florida, but go to school 4 hrs north...i want forged internals, but im skeptical of buing an engine that was originally intended for a drag car, when i need a motor tha will handle boost but can still make road trips b/t home and school

i did just crack a piston, so i am in the market...

>would this motor be streetable tho?
>
>im in south florida, but go to school 4 hrs north...i want
>forged internals, but im skeptical of buing an engine that
>was originally intended for a drag car, when i need a motor
>tha will handle boost but can still make road trips b/t home
>and school
>
>i did just crack a piston, so i am in the market...

the motor is as streetable as you want it...... ;) and btw, i got first dibs if the shippin aint too bad....

HRC SUPER 16G FOR SALE BRAND NEW,, 650 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

hey i will not mind taking the head i am in 33018 please email me at jouer@bellsouth.net with your location maybe we can do deals

If anyone cares, i was around when this monster was being built. if you give two serious shits about having a fast car, buy this motor. Ray's not fucking around. He's just trying to get rid of it, but it's worth oh so much more.

Seriously.. my god, i was reading and before I got to the price, I said to myself "yea, this thing is going to be like 3000 bucks.." and then i saw 850 and 300.

It's got to be a typo. Why would you sell so cheap???

all im doin is waaiting on a response...... i got the cash... its irking me, i havent got in contact with him but i hope to here from him soon, besides its only been like 20 hours but im so damn anxious!

HRC SUPER 16G FOR SALE BRAND NEW,, 650 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

Ray, I'll take the motor! Email me so we can work out method of payment. Sean

you got mail!

u have mail, thanx Ray.

WoW! thats what I call respopnse. :)
It is not a typo, it is correct.
$800.00 for the bottom end
$300 for the top end with Intake manifold.
Thanks for the supporting words old timers (you know you you are):)
This motor is not a joke, but the reason for selling soo "cheap" is simple. I am tired of being hit up with hallow offers that dont come through. And the others who B****ed saying I was asking way too much.(you know I am talking about) soo I figure if I realy want to sell it make an offer that NO ONE could refuse. I have close to $3,000 done just to the head and about the same in the bottom end, so if anyone wanted to even think my asking price was too much, they would be on crack. Some of you guys posted I had mail, but checked and there was none. If anyone is serious about this motor call me on my cell ASAP 305-785-6857 (Ray)
as for payment info, cash or money order/western union. ONCE AGAIN I WILL NOT JUST SELL THE HEAD, sorry. The work was done by South Florida Performance (SFP).
The motor is both street able as well as drag ready, it was built for 30lbs of boost as well as 100 shot of juice, so it would laugh at anything smaller, assuming you have the proper upgrades. i.e Turbo system/nitrous and all other ness components needed to tune. Was going to install into my street Eclipse but am going to sell soon so no more need for it. CALL ME if you can buy now, not next month. :) SEE YA!!!!!!!!!!

I wanted that car when you had if for sale back when it was all still together. I had the cash and was ready to fly to Florida and pay you cash. I guess something happened along the line and you never got back to me. Oh well...

I have no need for your bottom end but would kill for that head setup. If you do find a buyer for the bottom end and if they don’t take the deal on the head I will buy it in a flash. I know you said you don’t want to sell the head by itself but just keep that in mind just in case the person who buys the bottom end is mentally ill. :-)

Brian

does one neeed any mods to install that intake manifold ??? how much hp will that head provide for a nt car just as a swap and with that one can rev till 9k right ?


thanks

I do belive i got the motor and head i am sending money tomarrow. I'll still be calling you at 4 ray. If u end up getting any of my e-mails just disregaurd them Thanks.

>WoW! thats what I call respopnse. :)
>It is not a typo, it is correct.
>$800.00 for the bottom end
>$300 for the top end with Intake manifold.
>Thanks for the supporting words old timers (you know you you
>are):)
>This motor is not a joke, but the reason for selling soo
>"cheap" is simple. I am tired of being hit up with hallow
>offers that dont come through. And the others who B****ed
>saying I was asking way too much.(you know I am talking
>about) soo I figure if I realy want to sell it make an offer
>that NO ONE could refuse. I have close to $3,000 done just
>to the head and about the same in the bottom end, so if
>anyone wanted to even think my asking price was too much,
>they would be on crack. Some of you guys posted I had mail,
>but checked and there was none. If anyone is serious about
>this motor call me on my cell ASAP 305-785-6857 (Ray)
>as for payment info, cash or money order/western union. ONCE
>AGAIN I WILL NOT JUST SELL THE HEAD, sorry. The work was
>done by South Florida Performance (SFP).
>The motor is both street able as well as drag ready, it was
>built for 30lbs of boost as well as 100 shot of juice, so it
>would laugh at anything smaller, assuming you have the
>proper upgrades. i.e Turbo system/nitrous and all other ness
>components needed to tune. Was going to install into my
>street Eclipse but am going to sell soon so no more need for
>it. CALL ME if you can buy now, not next month. :) SEE
>YA!!!!!!!!!!

i just talked to ray about a hour ago...... im calling roadway to work out shipping.. if you guys know of any shipping companies that ship motors for cheap, send me a pm or email. im not looking to pay no more than 400 for the motor to come up just a couple of states. i see shipping charges on ebay for motors for about 250 and thats a v-8. but if you guys have any suggestions on shipping, let me know asap. ill update you guys if i run into a problem (shipping) i cant afford.... and yes,i am getting the ENTIRE motor if i dont get my ass ripped out on shipping charges, which i think ill be aite. :):):):):):):):):):):):):):):):):):)

HRC SUPER 16G FOR SALE BRAND NEW,, 800 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

well its official, tha motors mine! shipping charges were alot less than expected, got a pretty good deal. if some sort of fluke happens, that i cant get it..... ill be sure to let u fellas know first thing, cant wait to swap this bad boy in!!!

HRC SUPER 16G FOR SALE BRAND NEW,, 800 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

First off thanks for the response in my need to sell the motor. I had the oppertunity to talk to several of you guy's who I normaly just read post from. However I have some bad news for some, like in most cases first come first serve, and I just had someone from the board (nameless) come to my house and pay cash for the motor. I know that a couple of you guy's were in the process of sending some $$, if you already did then rest assure it will be mailed back next day,certified once I receive it. If you have not sent it yet, dont. Thanks again and sorry for those who missed out. Peace out!

Damit Ray you had to go and post when I'm out of town and have no net access. I've been trying to get a neon deal working for months and it's been rough, then I miss this opertunity. Damn!!!! Well if anything falls through I have money in hand to purchace this whole shabang so please let me know.

Well if anything falls throw my money will be on ur door step 10 am tomarrow morning the 27th. I sent it out next day fed ex then came home and seen ur post that u sold it. It's was a kick in the face. LOL. No biggy If every thing goes well just send er back and if a shipping company calls you just tell them they got the wrong number or something.

Silver GS Your money was received and it is on its way back first thing Monday. Thanks and let me know that you receive it. Also guy's check out my lates post on more stuff for sale, including the head.
SEE YA!!!!!!!

i would have paid you WAY more, but I was (and am out of town thank god for public net access eh?)