I have everything except front bumper, drivers fender, headlights, and doors, and some interior.

Motor/tranny/clutch is in perfect condition with red powdercoated VC, pacesetter headers, upgraded wires (8mm), AFX UDP, and all new belts.

Let me know what you all want...i am in the good guys section and have 60+ feedbacks on ebay with no negatives, and MY PRICES ARE VERY FAIR.

Everything in the car is MINT!!!!! no joke, i babied the car...any NYC 2Gnt'er will vouch for me.

Let the requests poor in...i accept paypal and however else you want to pay.

email/aim/post/pm easy to get in touch with me...i'll give you my tel # if you need it.

Also have custom CAI...custom short shifter (real short)...neuspeed springs (1.5" drop or something), tokico shocks, and i'm sure there's more that i can't think of...just ask...

ouch


"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

new project under way.................(see avatar for details)

knowing sonny personally for over a year i can vouch he is a honest and fair guy who really does have this car to part out .. i got the doors off of it and he is for real .. let my 100% feedback speak for itself also ;)

Got black ashtray/cupholder (if it's the one that comes with a lid for the ashtray), rearmost hatch piece (the one that goes over the latch and the stop lamp), and black upper steering column plastic?

If so, name the price.

-Corey

grey interior...but easily repaintable...i'll take an interior pic asap. Have all trunk pieces. and leather armrest center console.

ouch

"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

new project under way.................(see avatar for details)

Alright, painting my beige pieces anyway, so gray will work too...

Gimme pics, and a price. We'll see if we can do business.

-Corey

i need the hood handle thingy that is near your left knee when you are sitting down...along with teh plastic around it...I need it asap so i can pass inspection and get my car registered down herre. I don't know what that would go for though :shrug

how much for the dashboard, both front washer nozels (tubing)?

Originally posted by BuckNutty
i need the hood handle thingy that is near your left knee when you are sitting down...along with teh plastic around it...I need it asap so i can pass inspection and get my car registered down herre. I don't know what that would go for though :shrug

ummm...figure 10 bucks shipped?

Originally posted by Shockeclipse
how much for the dashboard, both front washer nozels (tubing)?

umm...100 bucks+shipping for everything? Is that good? i don't know what they go for.

ouch

"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

new project under way.................(see avatar for details)

How much for the head, intake manifold, and strut bar?


Turning is fun too!
go to www.sccaforums.com
-Do it...do it-

Originally posted by SilverEclipse
How much for the head, intake manifold, and strut bar?

strut bar already sold...head with valve cover? upper and lower intake mani? with injectors? answer these and i'll let you know. hit me up on aim:
aim:
sonnydbk

ouch

"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

new project under way.................(see avatar for details)

2 questions.... how recently have you had your timing belt done? i'm asking because of the tensioner... if that's new i'll take it off of your hands... how much if it is new?

what kind of exhaust do you have? cat back?

how much for the UDP shipped to 61920?

Originally posted by 95_ESi_Person
2 questions.... how recently have you had your timing belt done? i'm asking because of the tensioner... if that's new i'll take it off of your hands... how much if it is new? what kind of exhaust do you have? cat back? how much for the UDP shipped to 61920?

trying to sell UDP with motor, to minimize effort. tensioner is not new, and i have a gst exhaust with stock cat.

ouch

"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

new project under way.................(see avatar for details)

do you have skideskirts? rear discs? i'll take the whole rear brake assembly and the skirts if you have em

edit: oh..yea, the windshield wipers and stock spray nozzle thingies too :) mine are all funky
_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes

gst exhaust is exactly what i'm looking for.. how much do you want shipped to 61920?

power steering pump to 01201?

How much for the rear transmision roll bracket? This is the bracket that bolts to the tranny right by the speed sensor.


Edit: Will be shipped to 46835


Let me know,

Andy

MonteSS86@hotmail.com

Looking for udp too, I'll send you the stocker.
Nick
97RS

turbo8u> shut your SUCK
ZAO684: NIPPLE warning...maybe>?
turbo8u> yea i was a window licker on the short bus in junior high

I need the sunroof glass and sliding brackets. How much? I also need the passenger-side door jamb switch.

it has no ss and it has rear drums turbo8u, but you can have the windshield wipers (pm or email me for pricing)

i'll figure out the gst exhaust and power steering tomorrow

i have the rear tranny bracket, but i may want to sell the tranny as a whole. Is this connected to the tranny (would they need this if i was selling the tranny?) or is it something that they would have already?

dougie...the sunroof is not stock...just letting you know because those things prolly wouldn't fit in a stock setup. Let me know.

ouch

"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

new project under way.................(see avatar for details)

Originally posted by sonny bk
i have the rear tranny bracket, but i may want to sell the tranny as a whole. Is this connected to the tranny (would they need this if i was selling the tranny?) or is it something that they would have already?

They would have this already. There are 3 bolts that hold it to the tranny, but it isn't part of the tranny. It bolts to the motor mount along the fire wall in the back.

Andy

MonteSS86@hotmail.com

Originally posted by Ozzmosis86

Originally posted by sonny bk i have the rear tranny bracket, but i may want to sell the tranny as a whole. Is this connected to the tranny (would they need this if i was selling the tranny?) or is it something that they would have already?

They would have this already. There are 3 bolts that hold it to the tranny, but it isn't part of the tranny. It bolts to the motor mount along the fire wall in the back. Andy MonteSS86@hotmail.com

then i belive this part is now urs...we'll talk tomorrow about pricing....hit me up on aim: sonnydbk

ouch

"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

new project under way.................(see avatar for details)

Originally posted by sonny bk
i'll figure out the gst exhaust and power steering tomorrow

even the axle back portion is fine with me... piping before is basically the same... same diameter anyway... axle back preferably to keep costs down (and to avoid a huge bulky package)

i need a working cigarette lighter assembly. =/

do you have the armrest cover thing? i will buy it from you asap if you do.

bah you know the shit i want already. Free bump imo :)


#333
www.dsmlife.com

Pm'd

almost forgot... how much for them door handles?

dibs on the red VC. i am in New York also. where are you located so i can come pick it up. how much anyways? if the GST exhaust falls through, i ll pick that up also. thanks

how much for the coolant overflow tank and piping? Also need front O2 sensor.

What kind of tokico shocks, adjustable? And also what do you mean by custom short shifter? Does it work really good? I am interested in these two.

Originally posted by SilverRS
What kind of tokico shocks, adjustable? And also what do you mean by custom short shifter? Does it work really good? I am interested in these two.

tokico blues...non-adjustable, i want o sell them locally.
short shifter is stock one cut 2"...let me know

Originally posted by JWoodley
i need a working cigarette lighter assembly. =/

i have it somewhere...5 bucks plus shipping

Originally posted by AznKaos15
dibs on the red VC. i am in New York also. where are you located so i can come pick it up. how much anyways? if the GST exhaust falls through, i ll pick that up also. thanks

VC i'll sell for 60 bucks and the exhaust for 50...come pick it up...
sorry for who ever called dibs on exhaust, but i'd rather not ship something that heavy.

Originally posted by redeclipset
how much for the coolant overflow tank and piping? Also need front O2 sensor.

20 bucks for everything, plus shipping...

ouch

"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

new project under way.................(see avatar for details)

get my PM?
and whats the price on the dorrhandles?

and the short shifter?

im not local but will you sell the springs and the struts?

Originally posted by sonny bk

Originally posted by AznKaos15 dibs on the red VC. i am in New York also. where are you located so i can come pick it up. how much anyways? if the GST exhaust falls through, i ll pick that up also. thanks

VC i'll sell for 60 bucks and the exhaust for 50...come pick it up... sorry for who ever called dibs on exhaust, but i'd rather not ship something that heavy. "And my jam knock in the Mitsubishi Girls pee pee when they see me, Nava-hoes creep me in they tee pee..." >Biggie Smalls -- R.I.P. new project under way.................(see avatar for details)

where in NY are you located? email me or pm me. thanks.

I need:
- a driver's side door handle
-fog light bezels (go around fog lights (black plastic)
-driver's side tilt lever off the seat in grey plastic

email me please danzeller@sympatico.ca
Thanks

Hi, I need the female connector for the TPS. There are two sensors on the throttle body and the TPS is the sensor on top with the bigger connector. I don't need the sensor, I need the connector with a little length of the wire. If I can avail of it, it would be greatly appreciated. Thank you.


Armand

how much are you looking to get for the shifter?

I'll take seconds on the GS-T exhuast. :thumbsup

how much for the whole bottom half? Crank, pistons, rods, block, oil pan, and other associated shit.

email sent about the motor

Make offers on the engine, but remember, you have to take it out yourself (I'll help u of course) cause i don't know how and i don't want to start fucking up my friend's garage.

shortened shifter=20 bucks


ANY MORE PART ORDERS EMAIL ME!!!!!!!!!!!!!!!!!
EMAIL ME!!!EMAIL ME!!!EMAIL ME!!!EMAIL ME!!!EMAIL ME!!!EMAIL ME!!!

sonnybk@yahoo.com

ouch

"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

new project under way.................(see avatar for details)