| Go back to previous topic | | Forum name | 2GNT Buy / Sell / Trade (BST) | | Topic subject | FS: Accel inline, braided line and custom bracket | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i16&topic_id=38914 |
38914, FS: Accel inline, braided line and custom bracket Posted by HiOnPSI, Mar-24-04 11:57 AM
Bought this from JasonESi_T and installed it, but never used it. The problem was elsewhere. Now i have no need for it, so i'm selling it. I have another one that came off my car originally that probably still works, but doesn't look as clean. I'm taking offers.
 Jon
1997 Eclipse RS
13.887@104.648 5/30/03
www.haiokuracing.com
|
38916, RE: FS: Accel inline, braided line and custom bracket Posted by GhEttOrAiD, Mar-24-04 12:05 PM
price?
|
38918, RE: FS: Accel inline, braided line and custom bracket Posted by HiOnPSI, Mar-24-04 12:16 PM
reasonable offer for either.
 Jon
1997 Eclipse RS
13.887@104.648 5/30/03
www.haiokuracing.com
|
38937, RE: FS: Accel inline, braided line and custom bracket Posted by Ozzmosis86, Mar-24-04 05:54 PM
Fuel pump? What are the specs on it? I need one for a project in my Internal Combustion Engine class at school. We are putting a GM Supercharged Series II 3800 engine (L67) on a dyno. Please let me know the specs.
Andy
MonteSS86@hotmail.com
|
38942, RE: FS: Accel inline, braided line and custom bracket Posted by HiOnPSI, Mar-24-04 07:14 PM
Hm, i don't know. i don't know if anyone else knows, either. It came with the HRC kit. Max pressure is like 125psi or something. I don't know the lph or gph flow of the pump.
 Jon
1997 Eclipse RS
13.887@104.648 5/30/03
www.haiokuracing.com
|
38943, RE: FS: Accel inline, braided line and custom bracket Posted by grain, Mar-24-04 07:26 PM
ill give you 30 shipped for the pump.
|
38944, RE: FS: Accel inline, braided line and custom bracket Posted by Tommyboy, Mar-24-04 07:43 PM
i'm interested in the pump too, can you give me the part number off the pump i wanna look it up in my fuel pump manual at autozone, maybe i can cross reference it too another pump that we stock
|
38956, RE: FS: Accel inline, braided line and custom bracket Posted by lickscissors, Mar-25-04 01:44 AM
if any of them fall through, ill take it doug
|
38962, RE: FS: Accel inline, braided line and custom bracket Posted by Star Turbo Talon, Mar-25-04 02:16 AM
that pumop will run a 3800 series supercharged motor no problem.....if i recall that motor requires like 35-40 psi idle. that pump will supply enough volume and pressure (spec is like 119-125 max i think)for a project like that.
Terry
96 Eagle talon ESI rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT
Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)
|
38972, RE: FS: Accel inline, braided line and custom bracket Posted by HiOnPSI, Mar-25-04 03:35 AM
60 shipped for the inline with braided line 30 shipped for the one i pulled off my car. I thought the inline had gone out originally, it turned out that my stock pump went out. I could have just left the inline and not worried about it. That's my story for the original.
 Jon
1997 Eclipse RS
13.887@104.648 5/30/03
www.haiokuracing.com
|
38973, RE: FS: Accel inline, braided line and custom bracket Posted by Star Turbo Talon, Mar-25-04 03:46 AM
for anyone who doesnt have an aftermarket pump this is an excellant deal done pass this up. If you plan on going tubo or just want a high quality pump this is it and the price is damn cheap. If i didnt have one i would jump on this.
Terry
96 Eagle talon ESI rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT
Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)
|
38987, RE: FS: Accel inline, braided line and custom bracket Posted by Ozzmosis86, Mar-25-04 06:31 AM
Originally posted by HiOnPSI60 shipped for the inline with braided line 30 shipped for the one i pulled off my car. I thought the inline had gone out originally, it turned out that my stock pump went out. I could have just left the inline and not worried about it. That's my story for the original.  Jon 1997 Eclipse RS 13.887@104.648 5/30/03 www.haiokuracing.com
If it will run the SC 3800 I will take it for $60 shipped. Email me for payment details.
Andy
MonteSS86@hotmail.com
|
39064, RE: FS: Accel inline, braided line and custom bracket Posted by mike_d, Mar-25-04 05:36 PM
Also interested in one of the pumps. Let me know if one of them id available at mikeduarte1@yahoo.ca
|
39101, RE: FS: Accel inline, braided line and custom bracket Posted by Ozzmosis86, Mar-26-04 05:29 AM
The money has been sent for the pump and lines.
Andy
|
39114, RE: FS: Accel inline, braided line and custom bracket Posted by HiOnPSI, Mar-26-04 07:48 AM
Cool. (digs for box...)
 Jon
1997 Eclipse RS
13.887@104.648 5/30/03
www.haiokuracing.com
| |