Here is what i have left from a 95 GS

Front:
Knuckles
Front lateral arms, still have mitsu sticker on them, boot was ripped when i separated them and new boots are installed now. 30.00 shipped

Front wheel hub/bearing assy have been rebuilt and are in perfect shape on the inside, outside has been media blasted and painted. 45.00 +ship...will fit GST all years 90 day warrenty no accidents though

Rack and pinion 70,000 miles no leaks or damage to boots. new tie rod ends come with it 150.00+shipping

Upper control arms...excellent shape..come with mounts and bushing are in great shape.20.00+shipping

Front axles l/r no damaged boots threads are perfect. 40+shipp each

Rear:

Rear Bearings..have been rebuilt and media blasted...painted..45.00+ship will fit 96-99 FWD non ABS only 90 day warrenty no accidents though

Front suspension link that go from knuckle to body. bushing in great shape...20. shipped each

Upper control arms....come with mounts 15.00 shipped each

Terry

I need the little tie rod looking thing that connects the stabilizer bar to the strut. I needed it for the drivers side. If in good shape.

That is the sway bar link and i dont have one for sale.

Terry

I need the Pass. side upper control arm with the bushing, mounts and ukpper balljoint. Got it?

yes i do have it and can ship monday morning if ya want it.
Zip code?


Terry


96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Rear knuckles are sold..never listed either
2 front bearings sold...still have 2 more

Terry


96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

TTT

how much do you want for that stuff? what condition is it in?

The upper control arm and ball joint ect are in great shape no damage...make me an offer

Terry