| Go back to previous topic | | Forum name | 2GNT Buy / Sell / Trade (BST) | | Topic subject | FS: HRC piping, downpipe, intercooler, and cold air intake | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i16&topic_id=35632 |
35632, FS: HRC piping, downpipe, intercooler, and cold air intake Posted by Avenger EST, Feb-17-04 06:55 PM
I am selling my Greddy large core Intercooler, intercooler piping, 3" eliminator downpipe for the HRC kit, HRC exhaust manifold with 4 egt taps for thermocouples, 4 westach egt's (w green lighting) with thermocouples, greddy type s bov w/ flange for piping, all the silicone couplers needed for the piping, a gutted 3" cat that bolts to the hrc downpipe, and a custom cold air intake for the hrc kit with an AEM air filter.
the intercooler piping from the turbo to the intercooler is chromed with translucent red powdercoat on top of it (slightly scratched), the piping from the intercooler to the throttle body is ceramic coated silver/grey (slightly scratched) the cold air intake is ceramic coated silver/grey (slightly scratched) and is tapped for an intake air temperature used in most all stand alone engine management systems (aem, accell dfi, haltech, etc.) The filter is fairly new and still good. the piping from the turbo to the intercooler is 2.25" like the piping comming from the intercooler. not 2" like in the kit. no silicone elbows are used in the pipe kit.
The downpipe has 3 oxygen sensor bungs welded in (one for stock sensor, one for auxillary sensor (like greddy air/fuel gauge) and one for extra sensor (like wideband) it is ceramic coated black and has a hole for the autometer clamp on egt thermocouple.
the gutted cat is 3 bolt flange and bolts directly to the downpipe. the exhaust after the cat will have to be fitted with a 3" 3 bolt flange
The intercooler is the Greddy Large core turned around backwards to fit the hrc kit. the bottom plate is bent back in 1 section. no air leaks. bend is not visible past bottom lip of your front bumper.
The exhaust manifold has 4 egt fittings welded in for use with individual egt's (also for sale). the manifold is ceramic coated silver. the egt gauges are black faced 52mm westach gauges (powered by the thermocouples only. very responsive) gauge cups in chrome plated with translucent red powdercoat can be supplied if needed for no extra charge
The blow off valve is a greddy type s and fits with the intercooler piping.
intercooler (greddy 2 row 24 bar) and piping needed to atach to standing stage 2 kit price: 450 bucks plus shipping
piping: turbo to intercooler :75 bucks plus shipping
piping: intercooler to motor: 110 bucks plus shipping
greddy type s bov with flange for pipe kit (tube style): 100 bucks plus shipping
piping: cold air intake with filter: 90 bucks plus shipping
exhaust manifold: 200 bucks plus shipping
4 westach gauges plus probes and wire for manifold: 160 plus shipping
3" eliminator downpipe for super series turbos: 150 plus shipping
3" gutted cat : 50 plus shipping
package deals -------------
intercooler/piping (turbo to intercooler and intercooler to engine)/and bov : 700 bucks shipped to anywhere(does not include cold air intake)
exhaust manifold and egt gauge stuff: 325 shipped to anywhere (does not include downpipe and gutted cat)
e-mail gte201j@mail.gatech.edu if interested paypal gte201j@prism.gatech.edu if ready to buy
The A.D.P. "...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all." bring it on...........
|
35641, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by widebodied, Feb-18-04 12:29 AM
dibs, downpipe, and fmic and piping pending piping.. you got mail.
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job
 2000 Yamaha R-1, 165rwhp 117 ftlbs tq
 ALMOST THERE...... MUWHAHAHAHAHAHA
Originally posted by Thunderous_Talon a man could build a thousand bridges, and suck one cock. he'll forever be known as a cocksucker.
|
35647, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by dougie2, Feb-18-04 03:19 AM
I'll buy the manifold and downpipe now. Sent you an e-mail.
|
35657, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by freddy_00_69, Feb-18-04 04:52 AM
second dibs on fmic withn piping, i want some pics if you have some. I have the money right now to buy.
|
35658, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by dougie2, Feb-18-04 04:56 AM
Hey Armond, I got your e-mail reply and I sent payment via paypal. Let me know when you ship. Thanks man!
Manifold and Downpipe SOLD!
|
35659, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by xEclipsE RaceRx, Feb-18-04 05:05 AM
Woot Woot Ya Doug! :cheers
 1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
"Mommy financed...Mommy certified"
Check Out My Site For Pix http://home.comcast.net/~eclipseracer/Page/Home.htm
*Done with Project: Low Comp. Rebuild. Now I have a major oil leak by my rear main seal =(*
|
35663, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by freddy_00_69, Feb-18-04 06:00 AM
I just paid for the intercooler, piping, and bov. Let me know when it is shipped, thanks.
Interooler, piping, bov, are sold!
|
35684, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by Avenger EST, Feb-18-04 11:37 AM
I will ship it out tomorrow or friday. you will get it in 2-3 days from then. (both orders)
A.D.P. "...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all." bring it on...........
|
35688, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by freddy_00_69, Feb-18-04 12:03 PM
Thanks, i appreciate the quick shipping.
|
35719, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by widebodied, Feb-18-04 04:52 PM
man, this sux, called dibs on all the stuff that was sold, had a 13 hour day at work, and just dropped by the bank to deposit money for these items to paypal, not cool dudes, not cool.
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job
 2000 Yamaha R-1, 165rwhp 117 ftlbs tq
 ALMOST THERE...... MUWHAHAHAHAHAHA
Originally posted by Thunderous_Talon a man could build a thousand bridges, and suck one cock. he'll forever be known as a cocksucker.
|
35723, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by Avenger EST, Feb-18-04 05:03 PM
Originally posted by widebodiedman, this sux, called dibs on all the stuff that was sold, had a 13 hour day at work, and just dropped by the bank to deposit money for these items to paypal, not cool dudes, not cool. DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job  2000 Yamaha R-1, 165rwhp 117 ftlbs tq  ALMOST THERE...... MUWHAHAHAHAHAHA Originally posted by Thunderous_Talon a man could build a thousand bridges, and suck one cock. he'll forever be known as a cocksucker.
you called dibs, but did not agree to the prices posted. It doesn't work that way. sorry bro.
A.D.P. "...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all." bring it on...........
|
35799, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by turbo8u, Feb-19-04 12:30 PM
 _________ 96 talon esi-t san clemente, ca
as needles of ice are the ill winds' talons the coldest of shadows they seep unto the bone
|
35744, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by Sitinlo, Feb-19-04 01:00 AM
i want the downpipe and cat let me know how much for both shipped i have paypal
|
35760, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by EvuLFleA, Feb-19-04 04:50 AM
Originally posted by Sitinlo i want the downpipe and cat let me know how much for both shipped i have paypal
Downpipe was sold to Dougie if you read the whole thread.
I hate dibs. Money talks. :)
|
35764, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by Blizare, Feb-19-04 05:43 AM
Originally posted by EvuLFleA I hate Dibs, Money talks. :)
lol
|
35795, RE: FS: HRC piping, downpipe, intercooler, and cold air intake Posted by widebodied, Feb-19-04 11:47 AM
im not the one to back out of a deal, 99.9% of the time, i got the money on tap.usually when i call dibs, and get confirmation, the money is sent asap, it wouldve been sold to me if i didnt have a 12 hour workday yesterday.... DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job
 2000 Yamaha R-1, 165rwhp 117 ftlbs tq
 ALMOST THERE...... MUWHAHAHAHAHAHA
Originally posted by Thunderous_Talon a man could build a thousand bridges, and suck one cock. he'll forever be known as a cocksucker.
| |