Selling a stage 3 Turboteknics turbo kit (hahn piping etc but using turboteknics stage 3 Frank Turbo) rated for 30+ PSI, also comes with performance ignition mods DOES NOT come with new pistons or rods or any other internals. Asking price $2500 OBO Let me know. My E-Mail is Ziggy_Q3A@yahoo.com or you can just drop me a private message. Also looking for some good Cams for a 420A preferably Crane or HKS but others might do, MSD Dis 2 Ignition, MSD Performance 4 Tower Coil, Coilover Setup for 95 RS... I can do a deal with trade/money just gimmie a shout.

And what else comes with it? Details.

It is a full kit ready for hookup you might need some spari gaskets etc but they can be picked up at any local automotive store... My pal was running on 15psi all day long on stock internals he says its great... BTW this isn't my kit it is from a fellow DSMer down here in MS and I am trying to sell it for him without having to use Ebay etc...

He described the kit as;

Ready to install kit
Upgraded Ignition Parts Included
Mendral Bent Piping
Frank 3 Turboteknics Turbocharger (rated at 30+psi)
E Trim on Turbo providing better spool
Kit fits 95-99 GS or RS Eclipses

If after recieving the kit you have any questions I will send the e-mail and phone # for him to you after the sale so he can possibly guide you through installation and/or answer any tech questions you might have...

E-mail me at Ziggy_Q3A@yahoo.com if you are seriously interested in buying the kit... If you wanna do some item trades he is interested in the things I listed above he also said if you have anything else usefull on DSM's that he might wan't include that in the E-Mail and we will work out a fair price or trade/price...

He also said he wanted to add Venom Intake Manifold, Fuel Rail, Chrome plated Valve Cover, JE Pistons, H Beam Connection Rods, and a ported and polished head to the list of things he needs... If you have anything on these lists and are willing to trade send me an E-Mail and we will see if we can't come up with a fair trade/money deal or if its a fair offer just trade...

Some pics....



Turbine Shaft (Intake) No chips or crack great condition spins frealy but not loose...



Here is a pic of the turbine housing being honed for new Stage 3 Spindles (its been honed and balanced $400 worth of work)



Turbo housing itself, polished etc (this is a pic when the turbo was bought) but like I said it's only a week old so it has no ware or rust still in grade A shape...



Mendral bent piping from Hahn racecraft...



If you have any questions about these photos or tech questions E-Mail me and I will get Anil to E-Mail you back...

I cannot edit the last message anymore so I had to write a new one but he only want's to trade for JE pistons if you have the rings with them.

Man if I had the cash id would buy the kit right now... wish I could get a turbo in my car

>
>
>Turbo housing itself, polished etc (this is a pic when the
>turbo was bought) but like I said it's only a week old so it
>has no ware or rust still in grade A shape...

that is a pic of when the turbo was bought? then why is it on a shops website?

(name of the pic file)
>http://www.extrememotorsports.com/g2cat/frkl5-l.j pg

>It is a full kit ready for hookup you might need some spari
>gaskets etc but they can be picked up at any local
>automotive store... My pal was running on 15psi all day long
>on stock internals he says its great... BTW this isn't my
>kit it is from a fellow DSMer down here in MS and I am
>trying to sell it for him without having to use Ebay etc...
>


15 psi on STOCK internals................hhhmmmmmmm!!!!!!

are you sure it's for a 420a and not a 4g63. 15 psi is more than fine on a 4g63but not good for a 420a......BOOM!

I might have to check back with him it might be 15psi one the internals he had I will update soon, but I am 100% sure this is a 420a kit NOT for a 4g63

That piping is for a 2G 4G63 car.




-Tony '98-GST
eclipzgst@charter.net
http://eclipzgst.webhop.net
turboclipz on AIM

Actually buddy its intercooler piping for the 420a stage 2 kit from Hahn I got the pic right off the website so don't tell me I am wrong those and all other piping are supplied directly from hahn for the kit...

Sorry buddy, Their is no way that you are running 15psi on stock 420a internals... absolutly no way... I dont care if you are running race gas AND the correct fuel pressure AND you have ignition upgrades.
Sorry to call you on this. But that is bullshit.

Nick
97RS
Custom IHI Stage2
Obx exhaust, Limo Tint,
Custom interior, Upper Strut Bar, Kenwood/pioneer stereo.

Actually buddy, :rolleyes The piping IS for a 4g63, as is the turbo. The piping has a flange welded on for the 1g bov. The 420a stuff does not have a flange on the bov neck.

See the exhuast flange on the turbo? It's square. 4g's use a square flange (mitsu housing), and both the Star and HRC manifolds have a rectangular flange (garrett housing). Does the kit come with a custom exhaust manifold? Unless it does, that turbo won't be going on a 420a without some serious work.

You could put a Frank 3 on a 420a, but it would be pretty pointless unless you had the supporting mods to keep from blowing up your engine (internals,fuel sys, etc.).

here is what the turbo piping is supposed to look like

Why exactly are you argueing with me I don't give a damn if those pipes are for a 4g63 I took the pic off the Hahn site like I said the pipes icluded in the kit are the ones needed for installation and are direct from Hahn... I took that pic because it said "Stage 2 Turbo piping" witch is the same piping for this kit except this is a bigger turbo and a few more odds and ends... Oh btw I did mention 2 times already in this post it's not my turbo kit! I am selling it for a friend and he asked me to put up a pic of the hahn piping so I tryed who cares? Does it kill you to see the 4g63 piping up there and not the EXACT ones?

We dont give a damn about the piping like you suggested. We just dont like misleading information, and this hole kit is full of shit. We are pretty tight on this board, and we dont like to see fellow 2gnters getting f*cked. If anyone would like to buy a kit, or would like to know what you would need specifically so that you dont get screwed. Shoot me an emaill.


Nick
97RS
Custom IHI Stage2
Obx exhaust, Limo Tint,
Custom interior, Upper Strut Bar, Kenwood/pioneer stereo.

Jesus crist you act like I am trying to f*ck someone over buddy, I am just selling something for a friend you need to lay the hell off... BTW the kit is not full of shit Hahn makes the best turbo kits in the world for the 420a so you can go ahead and bite it. Torbonetics is also a well known company with a quality rep... Just because you think you know something doesn't mean you need to go spouting off and rune someones post!

LOL- Atleast its not a honda.....:thumbsup
PS that be 4g63 piping.

1999 EBP Civic Si- 2001 ITR engine. USETOHAVEBEENs-- 1997 RS-T

The trouble is not that players have sex the night before a game. It's that they stay out all night looking for it.

This reeeeks (-1 sp) of a rip off, I should know because I have been ripped before (and it was a hell of a lot less obvious than this). You give pictures off of Hahns website after kind of implying that they were your own(bet the turbo pictures are off of someone elses website)(edit: I just checked the picture properties and they are). So for 2500 dollars what the hell does the buyer get? Piping and a turbo? And "upgraded ignition"...wtf is that? 4 spark plugs I bet. What about the manifold? Also how does someone come to this board and immediately get the 3 positive feedbacks? In 2 friggin days!!! Everyone will agree that this is straight up fishy. Most people are here a lot longer before they get any feedback. Be careful here folks!!!

p.s. And the 15psi crap, all of the turbo guys know this is B.S.

moderators- this is not a flame this is looking out for each other like Collente said earlier



Ready to install kit
Upgraded Ignition Parts Included-sure...
Mendral Bent Piping-wtf is mendral, do you mean mental?
Frank 3 Turboteknics Turbocharger (rated at 30+psi)
E Trim on Turbo providing better spool
Kit fits 95-99 GS or RS Eclipses

Well just post some pics of the kit then we can see exactly what you do have. Nobody is TRYING to flame you but we really have no clue whatsoever on what you are trying to sell without pictures.

2GNT likes to look out for each other, what can I say. I'm sure you will get to know us a little better eventually and probably understand why we act like we do :)

Is this the same kit in that you listed in this post? http://forums.2gnt.com/dcforum/DCForumID30/3701.html
Also that block you speak of in the post I would like some more specs on that.