Stock 420A Head (no cams/lifters/rockers):
68k miles
valves and springs are included
cam journals look good
valves look good
(1) spark plug hole has been stripped, re-threaded, and stripped again
I don't know if the hole can be repaired
Price = $25 + shipping




Stock 420A Cams
68k miles
cam profile and bearing surfaces look good
Price = $40 + shipping (for the pair)




Stock 420A Lifters (lash adjusters)
68k miles
Price = $10 + shipping (set of 16)




Stock 420A Rockers (followers)
68k miles
roller surfaces look good
Price = $10 + shipping (set of 16)




Stock 420A Pistons/Rods
68k miles
pistons mounted on rods
ring lands look good
Price = $10 + shipping (each)




If you don't like the prices, feel free to e-mail offers to cbehnken@ixpres.com. I can accept Paypal or money orders. I get good deals on shipping, so don't stress about it. I'm in VA.


Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

More of my stuff. It looks so pretty outside of the motor. You tore that stuff down real quick.
-Dave

I was ripping the engine apart the night we unloaded it. I had it stripped down in a day. And I about broke my back putting the block on the engine stand.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

what part of Va are you from?

I'm in Gainesville. Its around mile 43 on I-66. I'm open to local pick ups too.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

do you have any idea how much it would cost to have that head shipped to 49548? I just want to use it for welding up a manifold so I'm looking for a low priced head.

I never thought of that. This would be perfect if you wanted a template for a custom intake or exhaust manifold. Shipping estimate is $13.29 by UPS ground. I'll suck up any costs if it goes over that. Send $38.29 by Paypal to cbehnken@ixpres.com and it will ship the next day.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

hey...sorry I kinda forgot about this...I'll send you 40 even later on today...thanks man :thumbsup

Head is sold. I'm still accepting offers on the rest of it. This stuff won't do me any good sitting in my garage.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

is there anything wrong w/ the piston/rods? I need one rod/piston in good condition... I'm in Blacksburg

I did inspect the pistons and rods upon removal. I didn't see anything wrong with them besides the dirt. Shipping will be about $6 to Blacksburg. If you get the piston and don't like how it looks, I'll take it back.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

cool.. pm sent... you dont have a crank do ya?

sent you a email corban

sent you an email and paypal.. peace

One piston/rod is taken. Still have cams, lifters, rockers, and one piston/rod. Will consider any offer...

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

Hey Corbin.. since you need the crank you have.. do you have a crank that I can get machined? I have my crank, but the guy at the machine shop said my main journal was damaged too badly to repair.. If ya do let me know thanks man..

Nope...no spare cranks. There are a couple good junk yards in Christiansburg. One of them has a fair number of 2GNT's. I forget the name though.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

you been to C'burg? my neck of tha woods man.. hmm well I'll check tomorrow and see..thanks man..

I actually went to school at Va Tech. I spent plenty of time scrounging around in C'burg junkyards.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire