Go back to previous topic
Forum name2GNT Buy / Sell / Trade (BST)
Topic subjectFS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i16&topic_id=33580
33580, FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by dougie2, Jan-25-04 12:05 PM
I'm looking to sell some major components from my custom turbo setup. All parts have about 1500 miles on them. I have pics, can post them here if needed.

Starion FMIC - asking $200 Shipped UPS Overnight - Modified, 2.25" In/Out, Mirror polished, Includes mounting hardware, Mounts to existing bolt holes on car.

Garrett T3 Turbocharger, Downpipe, and Custom Manifold - make offer $ - custom setup. Turbo has standard wheels and is .42 A/R on the compressor and .48 A/R on the turbine. New seals, blanced, etc. about 1500 miles ago. In Excellent condition. Manifold is a log-style with EGT bung welded in. It's flanges are straight and it's in excellent condition, has silver high temp coating. The turbo and manifold are already mated with gaskets in place. Custom downpipe with mounting bracket is also included. This setup make very good power and is a great custom setup! It makes power low in the RPMs and holds 15+ psi very well through redline. Also included is a custom manual boost controller already connected using stainless-steel braided lines and stainless clamps.

This is the setup pictured in my sig.
33585, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by onetrav, Jan-25-04 12:13 PM
Why are you selling it???? What type of price are you looking to get on the turbo setup???
33587, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by dougie2, Jan-25-04 12:24 PM
I'm looking to get $700 for the setup. It comes with T3 turbo, manifold, 304 stainless steel downpipe, boost controller with stainless lines/clamps, billet -10AN oil drain flange/fitting, internal wastegate and wastegate actuator.

The reason I'm selling is because I'm putting a different turbo and nitrous setup on my car- something that can take me close to 500 wHP.
33592, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by jsupetran, Jan-25-04 12:57 PM
check your pm doug

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting :thumbsup

33593, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by CopperEclipse96, Jan-25-04 01:12 PM
i'm interested in the manifold if you can part the kit out, and maybe the FMIC. do you still have both? i tried to IM you, but you weren't on. instant message me some time so we can talk.


edit: i would also be interested in the downpipe.
33594, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by python6586, Jan-25-04 01:26 PM
dibs on fmic, 200 shipped overnight sounds like a tight deal, any thing wrong wit it, can i get some pics or dimensions? pics of it on ur car would be great.

Mods:
CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit
33599, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by dougie2, Jan-25-04 02:42 PM
Here are all the pics I have of everything. Not only do these turbo parts look great, but this setup make a lot power! The FMIC has the fewest amount of bent fins I've ever found. Hardly any, flows great... I've run it up to 23psi. $200 shipped UPS Overnight is a done deal if you want it... send a paypal to turbodoug@direcway.com ... I would be able to ship it on Monday or Tuesday.







33610, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by xEclipsE RaceRx, Jan-25-04 03:42 PM
Hey Doug...sorry to take your post...off topic, but when you want to get together? I know im off everyday till wednesday..oh i know how i can help this post

Ive rode in Dougs car when he had those parts in it...everything is quality, and Doug wont fuck up over...mad power

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild. Now I have a major oil leak by my rear main seal =(*
33613, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by dougie2, Jan-25-04 04:00 PM
Hey Mike- I wanted to pull your tranny today but my car went under the knife for most of the day. I have an all new turbo setup going on the car probably next week. I'd like to work on your car Tuesday and/or Wednesday night. The first couple days of this week I'll be prep'ing my new daily driver so it'll get me to and from work for the next two weeks. I'll call you.

Someone by my turbo stuff... I can probably throw in a 1G BOV if someone buys it!
33625, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by xEclipsE RaceRx, Jan-25-04 05:16 PM
Lol what did you get as a daily driver? a freakin BMW or something? so you want me to call you up tuesday? what time you get off

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild. Now I have a major oil leak by my rear main seal =(*
33626, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by BMPDirk, Jan-25-04 05:18 PM
you got mail about the fmic if its still available.
33627, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by DomesticDstrbnc, Jan-25-04 05:27 PM
I am very interested in the kit. I have the 700, but what else would I need to get in order for this setup to work, like do I need to buy any additional lines or any kind of fuel controller?
33629, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by xEclipsE RaceRx, Jan-25-04 05:36 PM
controller and regulator, couple gauges, um ask him what all lines that your getting...

here goes his turbo list he made like a year or two ago
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=44618&mesg_id=44618&listing_type=search

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild. Now I have a major oil leak by my rear main seal =(*
33632, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by dougie2, Jan-25-04 05:44 PM
You'd need a rising rate fuel pressure regulator (Vortech S-FMU is a great choice), and some fuel hose to hook it up, you'd also need an oil feed line and drain line, a couple gauges would be nice, and a fuel pump. This is a great start for a custom turbo setup, these components were the most tedious to get customized when I put it together.
33636, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by DomesticDstrbnc, Jan-25-04 05:48 PM
Ok sounds good, where is a good place to get all of this?
33638, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by dougie2, Jan-25-04 05:52 PM
Vortech S-FMU @ SummitRacing.com
some fuel hose to hook it up @ SummitRacing.com
oil feed line and drain line @ hahnracecraft.com or summitracing.com
couple gauges Autometer @ summitracing.com
Walbro 255 HP fuel pump @ summitracing.com or ebay.com
33635, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by stoyboycs, Jan-25-04 05:47 PM
also want better fuel pump and fmu

Chris
33655, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by xEclipsE RaceRx, Jan-26-04 04:42 AM
Hey Doug, I'd like to talk to you about your turbo kit. Im kinda thinking that maybe I should go this way instead of jumping to that 20g turbo custom kit I was thinking...I think this would be a great opportunity for me to learn before I start boosting big time. So if the guy above falls through or is not as serious, I'd love to work something out. We'll get together and talk tuesday, just letting you know.

Edit: I'd want that fmic too :cheers

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild. Now I have a major oil leak by my rear main seal =(*
33658, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by BMPDirk, Jan-26-04 05:24 AM
is the fmic still available? i emailed you but never got a reply, just wondering.
33670, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by DomesticDstrbnc, Jan-26-04 07:07 AM
Is the price 700 shipped? Just need to know if I need to get more money or not.
33700, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by Sitinlo, Jan-26-04 02:32 PM
sent u a pm
33707, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by xEclipsE RaceRx, Jan-26-04 04:17 PM
I give up..i need to stop being greedy

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild. Now I have a major oil leak by my rear main seal =(*
33708, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by python6586, Jan-26-04 04:20 PM
you get my pm? i am ready to buy the FMIC

Mods:
CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit
33723, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by dougie2, Jan-26-04 07:51 PM
Wow... this thread blew up the last 24 hrs. I just sent most of you a PM or email. I've had many offers for the entire setup, so I'd prefer to sell everything together. I was going to sell the IC separetly but it has to go with the kit. I calculated exactly what I need to get for the following:

T3 Turbo
Manifold w/ EGT bung
Downpipe
Starion FMIC, Polished & Modified
1G BOV
Boost Controller and SS lines
Billet -10AN Oil Drain Flange
ic pipes not included

I need $1000 FIRM for all of it together and shipping will be $50 anywhere in the US. I guess at this point whoever claims it first and can use paypal to pay me gets it. Shipping will take approx. 5 days.

Email me or post here if you'd like to buy it.
turbodoug@direcway.com
33734, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by xEclipsE RaceRx, Jan-27-04 04:09 AM
Doug Im pretty sold on the idea of buying the whole kit, I just need to go over my budget and also with my parent, lol you know me. But we will work something out. Especially since my car is already at your house.

But if someone paypals you the money first, thats cool too.

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild. Now I have a major oil leak by my rear main seal =(*
35625, RE: FS: CUSTOM TURBO STUFF - T3, Manifold, FMIC
Posted by sak, Feb-17-04 04:34 PM
dougie is this turbo still for sale? if so please pm me or email me at zach_aka_goat@hotmail.com. I would like to use my tax money to get this turbo.