I wrecked my car 3 days ago after finishing it, insurance guy came out and it is totaled, but my loss is your gain!!!!!

All items are plus shipping!!

AEM cam gears (red) - $175 for both (comes with good year gatorback Timing belt)

Rebuilt Head (crower springs, PT cruiser lifters, new valves, new lifters, regrind cams (tim97rs's) light port work, less than 10 miles on head, comes with new head bolts) - $400

AFX underdrive pulley - $50 (comes with good year gatorback belts, less than 10 miles on belts)

Walboro 255 lph fuel pump - $50

Pacesetter Header (wrapped) - $75

Ported Intake Manifold - $40

Stock TB - $25

Also anything you can think of off a stock interior eclipse, make offers!

I may sell the NOS kit, S-AFC, and some gauges too

Please post and E-Mail me with any offers

dibs on UDP! and intake manifold!
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

dibs on gauges, what ya got?

second dibs on UDP

Originally posted by grain
second dibs on UDP

doh, didnt even think of that....:-)

non turbo or turbo headers? if non turbo ill take em

Originally posted by ajcfalcon
non turbo or turbo headers? if non turbo ill take em

:wary

Tan interior?
I need the driver's side A-pillar trim piece.
Would like a Homelink-equipped driver-side sun visor too.

Also interested in the UDP and Intake Manifold, if things don't work out.

Thanks.

Interested in the cam gears and the UDP if the others fall through. Let me know at mikeduarte1@yahoo.ca

i'll take the fuel pump if it is the high pressere i have cash in hand and you have mail.

if it's tan or black seats, can i get the skins??? :thumbsup

Is the car a five speed? If so i'm looking for a set of pedals, and the shifter and boot.

i need a black center console bad!!!!!!!!

if ya got them i want the stock sideskirts.... i dont care about color or quality, and if they are damaged towards the front thats ok too... i just need the rear big section...

thanks

jason

I spun a rod bearing and I am beginning to rebuild my motor. How much for your crank? How much for your stock rods?

Let me know. email: cartercorner@hotmail.com

Along with the crank and/or rods I'll take the header too.

Thanks
Tony

dibs on door skin and headliner email me at ibangdchopizzle@aol.com

e-mailed.

5$ for the HVAC trim? email me

i was interested in your stock throttle body and iac motor and sensors..for my 95 eclipse rs...thanks john

bump

anyone talk to this guy?
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

bump again

damnit, whered this dude go?
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

hey wuts up i need the headers the manifold and if u have leather interior i need the seats. maybe the head . please email me at eclps032000@yahoo.com thanks.

ok...last bump, this guy offically dissappered
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

DO u still have the interior panles?? Would they fit in a 96 RS