| Go back to previous topic | | Forum name | 2GNT Buy / Sell / Trade (BST) | | Topic subject | Excel TZ-10 17s with Rubber. (Bad 56k, bad) | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i16&topic_id=29231 |
29231, Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Nov-25-03 08:38 AM
My car has been totalled with a recent wreck so im forced to sell my wheels. I only had them two weeks and the person before me had them for about 3 months.
The tread life is nearly 100%, no nails or punctures.
One tire has a knot in it, I rode on it without any discomfort other than a slight "wump wump wump" at low speeds. Once I gained speed I didnt even notice it at all.
Of course with the wreck came scraping. I will post pictures so that you can see the scrap. Of the 10 spokes only 3 or 4 spokes were actually scraped.
These aren't going to be show stopper wheels but if you're sick of the 14s or 16s now these will look awesome.
One wheel accumulated quite a bit of brake dust from low brakes right before the wreck so my car sat in the collision center side yard for about 3 or 4 days and it rusted. The wheel isnt completley covered in rust and can be sanded off. They will require a little work, of course.
The wheels brand new are 800 with 205/40/17 tires.
Since they were almost brand new when I got them I will price them as follows:
-$100.00 for the tire with a knot. You can pick up a new exact same tire for $60shipped.
-$100.00 for the rust covered wheel, mind you the wheel isnt rusted but it is a layer of rust above the clear coat,
-$100.00 for the wheel with the scrapes.
This leaves a negotiable $500.00 not including shipping.
Either email or IM me at the adress and s/n below in my signature.
Thanks, Joseph
|
29232, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Nov-25-03 08:38 AM
http://66.193.230.60/~dlara/sedsmorg/attachment.php?s=&postid=92522
http://66.193.230.60/~dlara/sedsmorg/attachment.php?s=&postid=92523
http://66.193.230.60/~dlara/sedsmorg/attachment.php?s=&postid=92524
http://66.193.230.60/~dlara/sedsmorg/attachment.php?s=&postid=92525
http://66.193.230.60/~dlara/sedsmorg/attachment.php?s=&postid=92526
http://66.193.230.60/~dlara/sedsmorg/attachment.php?s=&postid=92527
http://66.193.230.60/~dlara/sedsmorg/attachment.php?s=&postid=92528
If these pics dont work for you lemme know and I can send you pics.
thanks for looking:)
Joseph
|
29284, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Nov-26-03 02:50 AM
$400+Shipping
Shipping is about$100.
That price is still negotiable, slightly.
|
29354, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Nov-27-03 05:01 AM
Come on guys:)
|
29355, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by injendsm, Nov-27-03 05:26 AM
they look pretty good imo but do you have any pics of them on the car?
|
29359, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Nov-27-03 06:15 AM
Yea man, sorry about not catching your IM earlier. I got you on my buddy list and ill send you a pic of them on the car.
Joseph
|
29360, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by invaznGST, Nov-27-03 06:25 AM
$500 without shipping for exels.. I got my 17 exel rims for $650 shipped for 215/45/17s brand new.. :/ I'd say lower the price down to like 300 + shipping..$500 is too much imo.
|
29361, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Nov-27-03 06:36 AM
Good for you, you got a deal.
If you were to resell yours and followed the same guidline I did, minus this for that, youd be much lower than what Im selling them at.
So if you arnt interested in buying mine, thanks for the bump.
|
29377, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by injendsm, Nov-27-03 11:34 AM
they are sold to me, i think.
|
29413, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Nov-28-03 09:12 AM
Originally posted by injendsm they are sold to me, i think.
If you want em, you know the price we came up with:)
Lemme know man!!
joseph
|
29417, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by injendsm, Nov-28-03 10:17 AM
i definately want them bro, they look amazin imo and i dont wanna pass this deal up. hit me up on aim next time we are both on and well work out the specifics:thumbsup
|
29420, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Nov-28-03 10:52 AM
:D
K
:cheers
|
29549, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Dec-01-03 01:21 AM
:D bump
|
29555, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Dec-01-03 03:22 AM
edit*
Price is at 450shipped or 300+shipping. Whichever is less for you.
I have one buyer, but if he falls through those are the prices.
Ive checked on shipping to Miami area and Michigan, and its been about 100 for all 4. maybe slightly more for West Coast.
Thanks,:)
Joseph
|
29587, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Swedish Marty, Dec-01-03 08:27 AM
hey were these already sold?.... if they are not please let me know cuz ill buy them for 300+shipping
|
29611, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Dec-01-03 12:22 PM
Marty, hit me up on AIM at brohymn411 sometime tonight and we'll talk!
later
joseph
|
30562, RE: Excel TZ-10 17s with Rubber. (Bad 56k, bad) Posted by Franklindsm, Dec-14-03 06:18 AM
:shrug anyone?
| |