well im relisting most of this stuff....ive got a 420a engine, bad crank....all sensors are left excluding the map, coolant sensor, and a tps sensor.... i still have:
good head, cams, cam gears, valve cover,
exhaust manifold, good, no cracks
heat shield, good condition
all other sensors for the engine, and tranny
good drivers side door, dented passenger, good handles
good grey cloth seats (make an offer, just get them out of here)
fuel rail, injectors, harness
throttle body, bare tb, iac sensor,
i can make a 60mm jeep tb for $160 shipped
bare block, water pump, pistons, pulley tensioners
(3) rear bearings, complete with lugs
rear drum brakes, complete
sony tape player/10 cd disk changer
clarion 6 cd changer...never used, 2 magazines
ALSO UP FOR TRADE FOR TURBO PARTS.... I NEED STOCK 1G IC, IC PIPES, SFMU, BOV....THANKS

ask, i might have it if it has anything to do with the engine.....
thanks, and just make an offer, just looking to get rid of this stuff

Ill take the Heat shield and if possible the Wiper fluid filler cap... I'll give you 35 bucks for both.. shipped to Canada...

let me know...
john_nery@dslextreme.com

to clarify my previous post..

its the heat shield for the exhaust manifold...

I need the front bumper mounting bracket if you have it.
Remdawgz@aol.com



Member # 333

isnt shipping a good bit more to canada? ill do $40 shipped for those two and i dont think i have the bracket

I'd like to get the fuel rail.

how much for the crank pulley?

James

Are the pistons new? If not how many miles?

Also, what kinda shape is the block in, and where are you located?

$15 for the crank pulley? block is in good shape, pistons are over 100k miles.... fuel rail is the one without the regulator....thanks
doug

im already taking the clarion, any pics of the sony stuff? anythingn wrong with it? how much?

sent pm's

bump

bump

i guess you can knock the 1g bov, IC, and IC pipes off your list. lol :thumbsup

OOPS!! :thumbsup

i know im a bit late but do you still have the cam gears? are they stock or after market. i need em bad. Thanks! latta

yeah ive got some stockers.....let me know a price
doug

You wouldn't happen to have an oil pan available would you?

no oil pan....wish i did for my custom turbo though

Interested in the block... you have mail.

im needing a head let me know what you will take for it

i dont think anyone wants to give me what i think its worth....i wanted $300 for the complete head with cams and everything, just bolt it up and go.....but supposively you can get it a lot cheaper than that....let me know
doug

Hey if you want a 3kgt bov I have one around, its good to about 12 psi. let me know if you want it

no, i actually got a 1g bov....i still really need the sfmu though...any help?

Nope sorry man, I sold mine a few months ago! sorry