Go back to previous topic
Forum name2GNT Buy / Sell / Trade (BST)
Topic subjectGoing to a junkyard with "a few" Eclipses there.....post what you want.
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i16&topic_id=25306
25306, Going to a junkyard with "a few" Eclipses there.....post what you want.
Posted by a_miller_76, Oct-10-03 08:31 AM


Give me a list and I'll see if they have it, you have unil Wed. at 4pm Eastern Time to get into the list. If you do not then don't expect me to find your part unless there are multiples of other requests.
25307, RE: Going to a junkyard with
Posted by micyek, Oct-10-03 08:42 AM
lower intake plenum and a talon high spoiler

I'll give 20 to 30 for the plenum + shipping

and my left nut for the spoiler...LOL
25473, RE: Going to a junkyard with
Posted by Remy, Oct-12-03 08:21 PM
I need a ashtray I prefer Black but if you have grey thats fine. Email me at Remdawgz@aol.com thx




Member # 333
25308, RE: Going to a junkyard with
Posted by jsupetran, Oct-10-03 08:43 AM
can you get me the slot under the single radio deck?

its easy to take off, there are 4 screws on the side.


-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler


:+ :) :-) x( :-( :( ;-) ;) :o :D }( ;( :P :9 :* :nono :rolleyes :wary :thumbsdown :thumbsup :7 :love :bowdown :shrug :cheers :puke
25309, RE: Going to a junkyard with
Posted by BMPDirk, Oct-10-03 08:47 AM
Hey man, can you hook it up with a pair of 97-99 fog lights?? I need the entire fog light and bracket or whatever mounts to it, i also need the switch inside:) thanks man.
25310, RE: Going to a junkyard with
Posted by a_miller_76, Oct-10-03 09:00 AM
The deal here is I'll find out if the A.) Have the parts and B.) What they will charge...then tell you. If you wanna buy it fine, if not no worries. I don't want anyone sending me money or anything before I get down there and search.


I'll also make a list of available stuff and put them up for sale.
25312, RE: Going to a junkyard with
Posted by rgirard413, Oct-10-03 10:09 AM
speed sensor and speed sensor plug
25315, RE: Going to a junkyard with
Posted by Diceman19, Oct-10-03 10:34 AM
1st gen(90-91)fog light switch.
25316, RE: Going to a junkyard with
Posted by KSeclipse, Oct-10-03 10:34 AM
i need a rear disc conversion:bowdown
25329, RE: Going to a junkyard with
Posted by SpreadEagle, Oct-10-03 02:46 PM
Hey man, thanks for offering your time to help people out. If they're in nice shape and not a PITA to get off I need the weather striping where the door and the window meet for both sides, circled them in red with my l33t mspaint skillz.



95ESI-intake,borla,sportlines,kyb,tsw
more on the way
25330, RE: Going to a junkyard with
Posted by theallpowerfulme, Oct-10-03 02:52 PM
Aaron,

If they have a 95 gst/gsx I would like the ecu. and if there are any black gs/t/x center consoles I need one. You will be tipped a lot for your trouble if you find these. Thanks man.
25344, RE: Going to a junkyard with
Posted by CVedEclipse, Oct-11-03 04:49 AM
couple random parts that i would like...

1. the harness and as much wiring as you can get, to both side markers
2. washer fluid reseviour cap, and the lines to run them to the nossils.
3. stock tails

if you could get any or all.. let me know... thanks
25348, RE: Going to a junkyard with
Posted by chadd7881, Oct-11-03 06:07 AM
If there is a white eclipse i want the passanger side fender and a 97-99 passanger headlight. HAggle me a price :thumbsup and tell me what the lowest they will go and i will send you the money thanks
25349, RE: Going to a junkyard with
Posted by djtrickee, Oct-11-03 06:11 AM
Aaron-
I want an upper intake manifold. Thats all. Thanks.

-Chris b.
25353, RE: Going to a junkyard with
Posted by eclipticrider, Oct-11-03 07:21 AM
i'm desprately in need of the armrest part... i don't need the whole console just the armrest and what ever drops in to the center console...

tia

later... btw i will pay up to 25 + shipping

WTB: Dodge Omni


http://www.geocities.com/shadyporshe851proof/frame_content/indexframe.html

mods: star stage III clutch + 60mm tb + the normal mods, bass, lights well u get the picture
25357, RE: Going to a junkyard with
Posted by esseclipse, Oct-11-03 08:13 AM
I need a Tan Hatch cover, and the board and tan carpet that goes over the spare tire. Email me at esseclipse@msn.com if you have any questions.
25364, RE: Going to a junkyard with
Posted by stoyboycs, Oct-11-03 09:47 AM
hey man I'm looking for the inside door panels but have to be gray and have non-power windows, power locks are fine but dont need them. Also need the vents in the driver and passenger side doors, and the interior piece that goes around the radio, also the ashtray and cup holder lid, all parts I need in gray. let me know at stoyboycs@yahoo.com

Thanks,
Chris:thumbsup
25367, RE: Going to a junkyard with
Posted by blckeclipse95, Oct-11-03 11:14 AM
hey, i need both headlight wiring. its the wiring inside the headlight, it can be unpluged, one side marker socket, and passenger side fender well. thanks
25429, RE: Going to a junkyard with
Posted by flossinpnoyracer, Oct-12-03 11:32 AM
see if you can get the o2 sensor off of the center exhaust pipe which is after the cat
off of a gst thanks



1997 GST

1997 RS
25450, RE: Going to a junkyard with
Posted by grneclipse, Oct-12-03 02:58 PM
Aaron, see how much they want for a door handle, I need the passenger side, i can get one locally but it's $25 plus I gotta take it out myself, if it's any cheaper than do it, I'll send the $$ immediately over paypal. Thanks



Don't have the stock Eclipse anymore
Just a stock Gsr now, :)
25475, RE: Going to a junkyard with
Posted by MitzClipz22, Oct-12-03 08:45 PM
Hey thanks for looking for all this for us. I would also like what eclipticrider is looking for with is the armrest and part under it. Also stock silver doorhandles and mirrors. manual if you can. Thanx again.
25490, RE: Going to a junkyard with
Posted by REV_GSlow, Oct-13-03 02:29 AM
im always looking for a set of 97-99 headlights:thumbsup
25493, RE: Going to a junkyard with
Posted by a_miller_76, Oct-13-03 03:51 AM
Wow, there's a pretty good response here.


I found out some bullshit....they are only open 8-5 M-F, so having a full time job this is gonna be hard. I may call ahead with this list and have them price it out before I go.


It's gonna be hard for me to get parts where I have to dissasemble the car. AKA fenders and such...plus anything where I have to jack the car up would be a bitch...aka brake conversions. But I'll see what I can do.


Keep 'em coming guys.
25494, RE: Going to a junkyard with
Posted by EclipseRST, Oct-13-03 04:05 AM
I need the driver's side orange sidemarker light. When I bought the car it had some black dot on it that looked like permanent marker and it drives me crazy looking at it. If you could get this for me I'd be very thankful.
25498, RE: Going to a junkyard with
Posted by ibangdchoeclipse, Oct-13-03 04:21 AM
man if you can get me this you will be crowned a god, i need the 4 front turning signal sockets and if possible 97=99 fog lights with brackets and egr seloinod with harness
25499, RE: Going to a junkyard with
Posted by Remy, Oct-13-03 04:39 AM
I need a front bumper mounting bracket.



Member # 333
25503, RE: Going to a junkyard with
Posted by eklipz, Oct-13-03 05:08 AM
if its not too much trouble i need both L/R 97-99 fender caps, a driver side door cap, windshield washer reservior cover and the signal flasher unit.
thanks :thumbsup
25506, RE: Going to a junkyard with
Posted by Grems81, Oct-13-03 05:29 AM
i need a grey ash tray out of a 2G! thanks
Josh
25859, RE: Going to a junkyard with
Posted by a_miller_76, Oct-16-03 04:03 AM
Alright guys, I planned on going this weekend but it's supposed to rain hard all weekend. I'll get there asap. Sorry for the delay
26064, RE: Going to a junkyard with
Posted by a_miller_76, Oct-18-03 08:28 AM
Okay guys, I pm'd you all whether or not I found the parts.

I'm putting up a list of things I found that weren't in these requests.