Go back to previous topic
Forum name2GNT Buy / Sell / Trade (BST)
Topic subjectGI: 3.55 neon trans with Quaife lsd installed and 2.6L shortblock
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=16&topic_id=122273
122273, GI: 3.55 neon trans with Quaife lsd installed and 2.6L shortblock
Posted by DirtMegirt, Dec-31-69 06:00 PM
Im posting to see if there is any interest in a 3.55 neon manual transmission with a quaife limited slip differential installed, as well as a 99 stratus 2.4l block with custom internals to increase displacement to 2.6l.

3.55 neon tranny with quaife lsd installed - $1200
I purchased the Quaife brand new and installed it into the transmission. The person i purchased the tranny from claimed that it was purchased new, disassembled, gears were cryo treated, ss shift pads installed and then reassembled. Hydraulic clutch bellhousing was then installed. Unfortunately i do not have any documentation to prove these claims. I have not put any miles on the lsd or the trans while ive owned it.






2.6L shortblock - $2000
I purchased the crank, rods, and pistons from the original 2.6. I then bought a 99 stratus block, and had it machined. The machine shop confirmed that the stroke was increased from 101 mm(3.976") to 104.78 mm(4.125"), and the block was bored from the stock 87.5 mm(3.444") to 88.9 mm (3.500"). Internals were installed using King bearings, new JE piston rings, as well as new JE wrist pins and locks. Bedplate is secured using the ARP al a carte assortment put together by Code4, and the oil hole from the balance shafts was tapped and plugged. Srt4 oil pump was installed, and the Miller tools were used to install the rear main seal, front oil pump crank seal as well as the crank sproket. Crank counter weights and rods were originally coated by Polymer Dynamics with an oil shedding coating which gives them the silver color. As you can see from the pics i have the srt motor mount bracket, the srt water pump(installed), both the upper and lower alternator mounts, the srt ac compressor mount with tensioner, the srt timing belt tensioner, the srt oil pan, pick up tube and gasket, all three pieces for the timing cover as well as the srt idler pulley, and the 2.4 dipstick and tube. I also have the two dowel pins for the head to block seal.










Hopefully someone would like to continue with this project. Don't be afraid to make an offer. Pieces located in northern New Jersey (07840). Local pick up would be perferred, but if buyer pays shipping im sure we can work something out. Please request any pics as well as asking any questions you might have. Thanks for looking.
122274, RE: GI: 3.55 neon trans with Quaife lsd installed and 2.6L shortblock
Posted by J, Dec-31-69 06:00 PM

Very pretty, free bump!

- J

122275, RE: GI: 3.55 neon trans with Quaife lsd installed and 2.6L shortblock
Posted by CODE4, Dec-31-69 06:00 PM
Smoking deals here folks - if someone is looking to make some serious torque, pick this up ASAP.
122288, RE: GI: 3.55 neon trans with Quaife lsd installed and 2.6L shortblock
Posted by iNoise, Dec-31-69 06:00 PM
Wow...Wish i could afford that Trans right now. GRRRRRRRRR! Free bump for some awesome deals GLWS
122362, RE: GI: 3.55 neon trans with Quaife lsd installed and 2.6L shortblock
Posted by iNoise, Dec-31-69 06:00 PM
Would you be willing to remove the LSD and sell the trans without it? Been shopping for a 3.55. Guy on neons.org had one for me said he would hold it for 3 days and when I went to pay him he said he sold it (Jerk) I cant afford to drop 1200, Just a thought.
122368, RE: GI: 3.55 neon trans with Quaife lsd installed and 2.6L shortblock
Posted by iamnotwhoiam, Dec-31-69 06:00 PM
If there is a chance to split the quaife and the 3.55... I may be willing to take the quaife?
I generated this page in 0.010807037353516 seconds, executing 7 queries.