Up first is a MS2 V3.0. Had this installed on my all motor car for about a month and only ran the car a couple of times. It's wrapped in carbon vinyl and looks amazing as you can see from the pics. Included is the wiring harness, voltage regulator, and paperwork. I used this to control fuel and spark with the stock ecu, so I'm including my fuel injector harness that's wired for use with stock ecu as well if you choose to use it, or you can also rewire it for your own needs.
$450 Shipped obo
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_063256_zpsr4ewgx55.jpg.html>
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_063315_zpsclujj7wz.jpg.html>
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_063242_zpsqjofnjkv.jpg.html>
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_064228_zps3ma5brgw.jpg.html>
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_065524_zps7wrkostn.jpg.html>

Next up is my AEM Wideband. Works perfectly and didn't see a ton of use. $125 shipped obo
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_044755_zpsjftuha9n.jpg.html>
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_044744_zps1ocieayl.jpg.html>

Next is a set of stock pistons standard bore size. Brand new in the box including wrist pins. $80 shipped
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_045146_zpspgz9adeu.jpg.html>
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_045212_zpshouvzn7m.jpg.html>

Last is a set of brand new King main bearings. $30 Shipped.
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_045030_zpspxiuyk14.jpg.html>
http://s1205.photobucket.com/user/Red90Sev/media/Mobile%20Uploads/20140414_045113_zpsrd09kqju.jpg.html>

Do the pistons have rings?

Sorry, no rings.

Will you accept $100 for the wideband?

- J

Sorry, wideband is sold.

Main bearings are for the 95 block. They are standard size.

Sorry for the confusion, the bearings are actually for the 96-99 blocks. Not the 95.

Okay, after much confusion, the bearings are actually for the 95 block! lol. They have the tangs all on one side. You can use these on the 96-99 blocks, but you just have to simply notch your block with a dremel and cutoff wheel. They are standard size.

MS2 sold