Allstar catch can with with fittings. 80.00 shipped SOLD


AMM intake . 400.00 shipped... SOLD


MSNS with wiring Voltage reg, With all connectors still wired for 97-99
400.00 shipped


Disturbing Motor sports fuel rail 6an in and out 70.00 shipped


FIC injectors 1500 cc blue Maxs 350.00 shipped


Wideband with Gauge comes with a spare new o2 sensor 200.00 shipped

Southbend clutch paid 1,200 under 1,000 miles 650.00 shipped


gt35r, symtech manifold with 38mm Tial wastegate with 4in intake pipe KN filter part of down pipe with dump tube 850.00 shipped


Aeromotive fuel reg with gauge 80.00 shipped..SOLD


hallman boost controller with 4an ss lines 75.00 shipped


Klushman fuel filter with cleanable filter 80.00 shipped


1g GSX brakes great shape 100.00 shipped


oil and coolant temp gauges with sending units with gauge pod 100.00shipped



Soild motor mounts motor,trans, with front and rear inserts. 70.00 shipped



Tial bov 2.5 pipe 100.00 shipped SOLD


Megan racing short throw shifter 40.00 shipped

Is the AMM the turbo version?

no it is not.

2.2 stroker, Callies 2.2 stroker crank, CP 40 over pistons,total seal rings,eagle rods, Melling high flow oil pump,Clevitte 77 rod and main bearings,ARP main and head studs, cylinder head-crane 12 cams,crane valve springs,1mm SS over sized valves , mild port and polish head,AEm cam gears.

800.00 picked up Motor has under 4k give or take, Motor has piston slap until warmed up. Motor was built lose for a reason.

I assume the FPR is a 1:1? Does it have the fuel line connections on the end of the lines or are they open like for barb fittings? Very interested in it for my turbo project.

Originally posted by 740 turbo brick
I assume the FPR is a 1:1? Does it have the fuel line connections on the end of the lines or are they open like for barb fittings? Very interested in it for my turbo project.

yeah 1;1, The reg has 6an fittings i just looped the line so reg was not setting open.

Getting out of the game bro? Or moving on to something bigger & better?

Originally posted by CODE4
Getting out of the game bro? Or moving on to something bigger & better?

Yeah, I'm done just lost interest all together.

I have a brand new G force full face helment, took it out the box tried it on been sitting on self sence. 200.00 Shipped... I paid 250+shipping.



Tial 38mm wastgate 100 shipped..


modern performance TB with moderns manual IAC.100.00 shipped


mSD coil Flat pin, 50.00 shipped


3in electric cut out. leaks a little because i 2step the car and bent the cut out flapper when it was closed. So i bent it back, sounds like a small exhaust leak when closed but works great. 80.00 shipped

Parting out the whole car if your looking for something, just ask i might have it. I collected a bunch of stuff over the years. Thanks

Pm'd you.

Fuel filter SOLD

Wastegate SOLD

Sorry but NO shipping outside the us..

More pics of the clutch, Forgot to add clutch comes with ARP bolts that go to flywheel to crank..You will need to get a new TOB.





Pic of 3in cutout. flapper little bent, Can easy take it off put on a good flat surface and with a small wack for a rubber mallet will fix it right up.


Older style MSD box, some reason it would not rev past 6,500 rpm... Make offer

Turbo for sale..
I have a GT35R, under 2500 miles never seen over 20psi. Always been ran on a turbo timer.NO bent fins in great shape, 4in intake Anti surge housing. Hotside is a t3 83A/R.

Comes with drain and feed oil lines. coolant lines, 4bolt to 3in v-band clamp with new ring, AGP oil thing, I can't think of whats it called. keeps Turbo from getting to much oil pressure..

600.00 shipped






Also have a symtech Manifold. IT WILL NEED 2BOLTS DRILLED OUT THEY BROKE OFF. Easy fix for a machine shop. 230 shipped.

Modern TB SOLD

GSX brakes SOLD

Cutout SOLD

The turbo will come with a K&N air filter,I will also throw in a turbo timer.

Have a set of tinted tail light, 100 shipped middle part has a small chip missing.



Also a set of wheel bearings under 600 miles with EVO arp extended wheel studs. 100 shipped


If you see something you might want let me know.
200 for the wheels if somebody wants to come and pick them up.1 tire needs replaced but holds air.

Solid motor mounts, motor,trans, with front and rear inserts..SOLD

Crane 12 cams with some old school AEM true time cam gears. 150.00 shipped they have around 7,000 miles on them





Valve cover with welded 10an fittings 75.00 shipped

Splitting the bottom end up 500 picked up..

Aem cam gears sold off the cams... MSNS sold...

100 shipped for the crane 12 cams

Selling anything out of the interior? I need some trunk panels in that color (the rearmost panel, actually).

Also kind of interested in those black interior door handles and the door handle trim.

If you're completely parting it out, I need a dash-side power mirroe harness.

if I had $600 to throw at it, I would take that GT35R in a fucking heartbeat.

Originally posted by DarkOne
Selling anything out of the interior? I need some trunk panels in that color (the rearmost panel, actually). Also kind of interested in those black interior door handles and the door handle trim. If you're completely parting it out, I need a dash-side power mirroe harness. if I had $600 to throw at it, I would take that GT35R in a fucking heartbeat.

The rear panel has a crank in it, kinda rough shape, I do have the door handles and trim. Just send me a pm if you want them. I should have the mirror harness also.
I'm really surprised the turbo ant sold yet.

Hallman pro boost controller.. SOLD

YHPM.

Pm sent.

wheel bearings with arps SOLD

new prices on some stuff.

500 for the clutch

175 for the wideband

65 for the fuel rail

80 for the oil and coolant gauges

35 for the Megan short shifter

200 for the turbo manifold

300 for the injectors SOLD

575 for the turbo

All prices are shipped

valve cover SOLD

OBX Diff, put in same time as clutch, Has the upgraded washers and bolts along with the side gears beveled. 400 shipped

damn man. Really wish I had more cash to throw at you.

Originally posted by 1slw97
OBX Diff, put in same time as clutch, Has the upgraded washers and bolts along with the side gears beveled. 400 shipped

lol, I saw this on neons.org and went to post up the link on 2gnt. I guess you kinda beat me to it, haha

Wideband sold. I need to move this stuff, fill free to make a offer. Worst i can say is no.

What info can you give on the OBX lsd? did you have any fitment issues with it, leaking seals, used with or w/o clips?

Originally posted by Cyexmaster
What info can you give on the OBX lsd? did you have any fitment issues with it, leaking seals, used with or w/o clips?

I used clips, The only issue i came across is the driver side axle, Depending on the brand of axle. I had some snap right into place then i a axle i had to slightly trim the axle down a hair, Before the clip.

Here is the right up i went off of,When rebuilding the unit.
http://forum.2gn.org/viewtopic.php?t=54375

So with stockers it should not have problems?

Originally posted by Cyexmaster
So with stockers it should not have problems?

IDK never ran it with stockers, Advanced and autozones are the ones i ran.

Ok, thanxs for the info. I will be checking up on this and if you still have it when I get some $ we can talk.

T-Stat housing with welded 8an with 4an on over flow side, Comes with new t-stat and gasket. 30 shipped could use a recoating on the housing.It's powder coated blue.



Inline walabro 255...... 35.00 shipped
Intank walabro 255......35.00 shipped

eibach sportline lowering springs 140.00 shipped

Intank Walbro sold
Megan shifter SOLD

Turbo SOLD

Originally posted by 1slw97
Turbo SOLD

Someone is a lucky bastard.

OBX lsd SOLD

oil and coolant temp gauges SOLD
Symtech Manifold SOLD

2.2 bottom end SOLD
MSD SOLD

Clutch 500 shipped
Fuel rail 60 Shipped

Clutch and fuel rail still for sale, Make offers. I would like to get this stuff out my way.