Refresh yourself with the section rules.

Its been a long and enjoyable ride, from daily driver to street/race car to race car. But everything good has an end. I am parting out my Eclipse. The parts I am selling are(all are OBO to sell fast):

1-Megasquirt ECU with wiring - $400.00
2-Intake Manifold and Throttle Body - $200.00
- will bolt into factory lower intake manifold
3-(4)1000cc FIC injectors - $250.00
4-Tial BOV - $150.00
5-Tial 38mm Wastegate - $150.00
6-Precision Front Mount Intercooler - $100.00
7-Crower Stage 2 Cams (64462-2) - $200.00 - SOLD!
8-Crower Stage 3 Cams (64463-2) - $350.00 (almost new)
9-Tubular Exhaust Manifold with GT35R Turbo - $1000.00
10-JEGS 4" Wide Rims with new Nexen Tires - $300.00
11-(2) Walbro Fuel Pumps
11-Eclipse RS-T Shell - $1000.00
- ready for the track
- 6-Point Roll Bar
- KYB Shocks all around
- seat not included, only the two factory ones.
ADDED-12-Onsuku cam Gears - $50.00 (shipping included)
ADDED-13-(2)SPEC Clutch Stage 5 - $200.00 each
ADDED-14- NVT350 Transmission, welded diff, shift perfect! - $200.00











More pictures per request.

How old is the ms?

Megasquirt is MS-I V3.0 running MSextra.

I wish payday will get here asap, few things I'm interested in.

Question, do you still the chrome weld wheels when you went to 10.87

Wow. Cant believe Ive never seen pics of this car. Full Blown Race Car?

I am interested in the crower 2s, but Im paying off some hospital bills. Ill let you know for sure after this next paycheck. Any wear on the lobes, actual 64462-2 part number on the side? The last cams I bought were not 2s....lol.

Can you pm me more info on the crower 2's. VERY intrested. Or you can text for a much quicker response. 713-679-4719. My name is John. Wait to here from you.

Also, what coilpack/plug wire combo is that? I love it, don't ask why haha

If you are running MS, you can modify the pig tail of the coil plug wiring to accept the 4G63 coil pack with MSD wire you see here.

These are genuine Crowers. I ran the 10.87 with this cams. They are very street friendly and you only need to upgrade valve springs. They have normal wear, they are good to run.

Well I'm running ms1 v3 board as standalone so I should be good haha. Does the board need to be modded to do so? I'll pm you about the cams in just a second.
What mods does your Ms board have? Seems your running as a standalone aswell so I'd imagine it'd not just the normal board.

are you parting out the entire car and these are just a few of the things you're parting with first?

Originally posted by 420agreenvilleSC
are you parting out the entire car and these are just a few of the things you're parting with first?

Same question here as well. Im seeing things im interested in, but its not in your official part out list.

Originally posted by 420agreenvilleSC
are you parting out the entire car and these are just a few of the things you're parting with first?

Everything will be sold. I want to keep all the interior parts with the car except for the Wideband that I will keep. The car wiring was made by me and all the gauges are tie into a main power panel. Other than that, everything is for sale.

Originally posted by 740 turbo brick
Wow. Cant believe Ive never seen pics of this car. Full Blown Race Car?

You've seen this car. Check the Race forum.

Sorry you're out, Cesar. I was counting on you crossing the threshold of 10.87. Dammit, now its just a tie.

But I understand things sometimes just move on.

BTW, great price on the Crower 2's. Got any adjustable cam gears available?

Originally posted by bullettdsm

Originally posted by 740 turbo brick Wow. Cant believe Ive never seen pics of this car. Full Blown Race Car?

You've seen this car. Check the Race forum. Sorry you're out, Cesar. I was counting on you crossing the threshold of 10.87. Dammit, now its just a tie. But I understand things sometimes just move on. BTW, great price on the Crower 2's. Got any adjustable cam gears available?

Basically that was going to happen this year, unfortunately I had an issue at the dyno. My new setup was 10.5:1, E85, Stage 3 cams. I dynoed 540hp at 22psi, but when going to higher boost, something let go and a rod came out of the block. AFR were at 11.6 or so. Maybe my mistake somewhere, but oh well. Time to move on. I had a lot of fun, but I am 40 and as an old man I am(LOL!) I just got a Vette(my dream car) to enjoyed with the wife.

Crower 3's gave me a lot of power with the new comp, just 10in in vaccum.
Adjustable cams are from E-Bay - Onsuku Cam gears, maybe $50 shipped.

Sorry if it takes me time to reply, I am working from 8:00am to 5:00pm.

Ill take the injectors, pm me your Paypal or whatever your preferred method of payment is please.

Pass on the E-Bay (just had a set break). I hear ya on the breakage. Little things maybe, but that's a re-start.

Sorry to hear!

Pm sent

ITEM #8-Crower Stage 3 Cams - SOLD!
Item #15-Aeromotive FPR - SOLD!

Hey Cesar,

Did you get my email about the injectors? They are for the 4g63, do they use the stock injector plugs to connect the wiring or do I need to order some different ones?

Thanks,

Aaron

Originally posted by 99RedGs
Hey Cesar, Did you get my email about the injectors? They are for the 4g63, do they use the stock injector plugs to connect the wiring or do I need to order some different ones? Thanks, Aaron

I did not. But yes, they are 4g63's injectors.They use the same plugs. You don't need to make any changes.

Will you be selling the aluminum radiator on the pictures if so, let me know how much shippe to zip 00612.

Originally posted by Cyexmaster
Will you be selling the aluminum radiator on the pictures if so, let me know how much shippe to zip 00612.

Here are the pictures. The radiator has two small holes that can be fixed. $75.00 plus shipping.



The small holes are in the right lower corner. Easy fixable.


Wow, I just check shipping and because of the size of the package, looks like it will be around $50.00 for shipping.

More pictures:
Precision Intercooler

Custom Intake Manifold with 8-injector set-up, 65mm Ford Mustang TB. Lower intake can be separated from upper intake.



1050cc FIC injectors (2 ohms)

950cc FIC injectors (2 ohms)

ARP Head Studs

OBX High Flow Fuel Rail

MSD Coil Pack


Eagle Rods - set of 4

420a Valve Cover

Kings Main Bearings - 0.010 or 0.25

Hayden Oil Cooloer Adapter or Greddy Oil Adapter

Custom Catch Can

RCI Radiator Overflow Can

4g63 Coil Pack (with bracket)and MSD wires. Just change the coil pig tail plug and go!


Onsuku Adjustable Cam Gears

420a Custom Turbo Manifold, Mitsubishi Turbo Flange, 38mm WG Flange, GT35R Turbo, Tial 38mm WG

Damn lots of goodies! would you by any chance happen to have a set of STD size pistons? also could you let me know the thickness of the radiator cuz mine is really tight and it would suck to buy it and that it dosent fit....

Originally posted by Cyexmaster
Damn lots of goodies! would you by any chance happen to have a set of STD size pistons? also could you let me know the thickness of the radiator cuz mine is really tight and it would suck to buy it and that it dosent fit....

No STD pistons, just 3 0.020 over 10.5:1 JE pistons in great shape.
The radiator is 2" in thickness.

No, sadly that wont fit... :/

I noticed you have the rods do you have all 4 of them? if so let me know how much. and thanxs for the fast replies! ;)

pm sent. Interested in the cam gears.

Price on the 4g63 coil & injectors. Shipping would be to 77598. Thank you sir. i would need the pigtail aswell if your willing to cut it off.

Ive messed him twice and haven't heard back. Kinda makes me mad.

Originally posted by JoshDSM
Ive messed him twice and haven't heard back. Kinda makes me mad.

If you messed with me twice, I don't reply. LOL! I have been off the forums for a while. So you are interested in the cam gears?

Originally posted by jdm1990
Price on the 4g63 coil & injectors. Shipping would be to 77598. Thank you sir. i would need the pigtail aswell if your willing to cut it off.

Shipping will be around $20. Everything will be $345.00. This includes the 4g63 coil and spark plug cables, 1050cc injectors and shipping charges.

Originally posted by dalesmitsu
pm sent. Interested in the cam gears.

Yes, they are available.

Originally posted by customrsturbo

Originally posted by dalesmitsu pm sent. Interested in the cam gears.

Yes, they are available.

cool, I can send payment now. what's your paypal.

Ok, I definitly meant to ask for the price on the coils and wires haha not coils and injectors haha.
Also, can I get a price on the intercooler and pipes? And size of the pipes?

Originally posted by jdm1990
Ok, I definitly meant to ask for the price on the coils and wires haha not coils and injectors haha. Also, can I get a price on the intercooler and pipes? And size of the pipes?

$75 coils and wires
$250 1050cc injectors (low ohms)
$150 intercooler only

Awesome. Any chance they will come with the pigtail ajd mounting bracket?

Originally posted by jdm1990
Awesome. Any chance they will come with the pigtail ajd mounting bracket?

Bracket, yes. The pigtail, no, sorry it is part of the wiring harness of the MS. But you can find it in any 1g Talon or Eclipse wiring harness.

hahaha oops bad typo, I want the gears if you still have them. money ready to send

Willing to ship that transmission? If so pm a price to zip 47807 Thanks

Ok guys, accepting offers. Need to clean my garage. Cams, fuel pumps, bov, fuel pressure regulator were sold. Still a lot of parts.