*** 420a Crank Scrapers For Sale ***

I currently have crank scrapers that have been precision laser-cut from 12 gauge steel. Perfect fitment and trial tested. Here's a little bit about crank scrapers (for those that aren't familiar with the upgrade):

• Less rotating mass for the engine to accelerate because of the removed oil
• Reduction in loss of power because of excessive drag caused by the windage cloud
• Helps reduce engine damaging oil-foaming
• Helps avoid oil starvation by keeping the oil in the pan during hard braking and turning as well as during off-road driving
• Helps to cool critical engine components by quickly returning heated oil to the sump
• Helps to prevent the cylinder walls from being overloaded with oil
• Can help with fuel efficiency

You can learn a little more info about them and how they work by clicking this link - Crank Scraper Information
TERMS OF SALE
--------------------
Price: $35 shipped (ONLY within the continental US) (PM me for any other)
Purchase limit: Unlimited
Payment terms: Bank Certified Money order, personal check, cash, or PayPal GIFT method (PayPal is preferred)
Shipping method: USPS Priority Mail (non-negotiable)
Ship-out estimate: 1 business day
Instructions: Will be sent with the crank scraper
Tracking & communication: Tracking number will be provided upon shipment via 2gnt private message.

**NOTE** I will not be held responsible for order if engine is incompatibile. It is the buyers' responsibility to ensure product fitment prior to purchasing.
**NOTE** I don't have as many as I'd like, therefore these are sold on a first come first serve basis. You may send me any further questions you may have but please, have patience as I anticipate a swamped inbox full of them. I will always respond.


PAYMENT METHODS (4)
--------------------
(1)PayPal GIFT method (PREFERRED): click this: Send Money PayPal Link
Step 1: On the right side, enter in $35, USD, and payment radio button of "Friends and Family"
Click the "Continue" button to proceed to step 2.
Step 2: Enter "To" email address of varsity8129@hotmail.com and "From" as your PayPal email. Click the "Continue" button to proceed to step 3.
Step 3: The system will now require you to login if you haven't already.
Step 4: Scroll to the bottom of the page and notice the "Email to recipient" section. Fill in the Subject line with "Crank scraper payment". ESSENTIAL - fill in the optional message box with your full name, address and phone number. Failure to do this step may delay shipment.
(2)Money Order: Must be a Bank Certified Money order. Notify me via PM if this method will be used.
(3)Personal Check: Notify me via PM and I will give you the address to send it to. Crank scraper will ship upon the check clearing.
(4)Cash: Notify me via PM and I will give you the address to send it to. Who doesn't like cash? :P


**** If you have any further questions, please contact me HERE to send me a private message ****

Special thanks goes out to 2gnt!

Very nice piece. You wouldn't happen to make one for a 2.4 with a srt oil pump would you?

Originally posted by PsychO
Very nice piece. You wouldn't happen to make one for a 2.4 with a srt oil pump would you?

No

Ordered

Originally posted by 740 turbo brick
Ordered

Thanks! Will ship out tomorrow but for

future buyers, please notify me of your purchase via PM rather than thread reply. I get a PayPal payment notification anyway.

looks like it would scrape a little less than the isiharra(or however its spelled) one, yet at the same time its less than half the price. Tempted to get a back up one...

Thank you to those that have purchased so far. Feel free to give me feedback.

Just a little FYI.

I haven't posted this up on tuners or neons.org and i really dont feel like dealing with them either so this is just a tiny bump. I have sold several since the start of this a few weeks ago on here but if no real change in demand occurs within the next week or so (and i don't think there will be) it'll be up on eGay to reach a larger audience but with an unfortunate slight increase in price to make up for the outrageous fees. I can try and post the link to this thread on the eBay listing, but am afraid they will remove the listing if I do so.

Those that are still interested through here on 2gnt can still avoid the higher price of eBay by following the instructions above.

FYI.. Pulled mine off to re ring the block.

It was on from the moment I started the new motor. Sides of the crank are CLEAN. As in no oil at all. Ends are oily and the bearings were oily.

So in short, these work. Mikey and I spent alot of time getting the tabs even and bolt holes even. Lets just say that the bolt holes are not that correct on the IJ ;)

On eGay - http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=130521638959

I'm going to get one.

Would I first put sealer in between the block and scraper then gasket and then the pan?

Originally posted by scorpo86
Would I first put sealer in between the block and scraper then gasket and then the pan?

Installation Instructions will be included with every purchase, but can also view it here: http://www.2gnt.com/documents/420agreenvilleSC_Crank_Scraper_Installation_Instructions_%28420a%29.pdf

Also an update on quantities, I have plenty. lol