Up for grabs is a set of Custom made INDEPENDENT THROTTLE BODYS or better known as ITBs.

This is a one of a kind set up as no current manufacture makes these at all. Many have been attempted but never done.

The set is based off the factory 420a lower half manifold, resized with equal length runners for a factory fit.

The outlets of the runners have been ported to to vastly improve flow.

They have 48mm ITBs each with individual throttle adjustment by either a set screw or linkage.

Included is a set of washable reusable foam filters by UNI FILTERS.

Custom throttle cable brackets were made to accept the factory cable, which is supplied in the kit.

Custom alternator bracket was made to give more clearance, which is supplied in the kit along with a BRAND NEW ALTERNATOR .

Each runner is plumbed underneath with a 3/8 VACC port which goes to a VACC BLOCK for accurate VACC signals which is included in the kit.

BONUS... I'm including a VENOME racing full return style fuel rail with two -6 an fuel line fittings and RC engineering 36lb injectors perfectly sized for this set up. YES, YES...you get fueling too!

THIS IS A COMPLETE BOLT ON SET UP GUYS!

AND FUNCTIONS FLAWLESS!

It was fabricated for me by a local speed shop which has extensive experience in building custom ITBs and Plenums.

Over $2000 invested into the kit.

Reason for selling these and part out of car is because car was horribly damaged in a bad wreck.

Price...$1000.00 Buyer pays shipping.
PAYPAL ACCEPTED!



























Also up for grabs is a 034Motorsports 1C ecu kit with everything you need convert to standalone EFI.

heres the link to the kit...

http://www.034motorsport.com/034efi-engine-management-ecu-packages-universal-cyl-stage-ic-waste-spark-ign-p-249.html

BONUS...I'll include an AEM UEGO Wideband AFR gauge with sensor already wired into the ecu harness for your convenience, dual gauge pod bezel and VDO VACC/ BOOST gauge.

crank position block-off plate is also included too.

Wiring harness was made to fit perfect with the 420a motor and all connections were soldered.

A 60-2 crank trigger wheel kit with sensor and bracket is included in the kit made specifically for the 420a motor.

made to work with factory coilpack.

EVERYTHING IS INCLUDED FOR A DIRECT PLUG AND PLAY SETUP. GIVE IT GROUND AND POSITIVE POWER AND VACC LINE...AND YOUR GOOD!

Worked amazing on my car especially with the ITBs!


Price...$800.00 buyer pays shipping
PAYPAL ACCEPTED!

48mm per runner seems like pure overkill. How was low speed throttle response?

Originally posted by DarkOne
48mm per runner seems like pure overkill. How was low speed throttle response?

Throttle response is dependent on throttle position when it comes to itbs, not the size especially if they are a bit oversized... which they are not. Now I could see how it coould if they were too small.

LOL! believe me...while idling at 10-12 inhg the second you touch the throttle the engine reves like a damn street bike! Honestly.

so where's the provision for the MAP? what about IAT? ok last one, what about the TPS...

Originally posted by 420agreenvilleSC
so where's the provision for the MAP? what about IAT? ok last one, what about the TPS...

The "broken" TPS is on the end in the last pic...

The" cracked cover" that surrounds the sensor is a honda tps which functions "perfectly" """""""""".

Map refrence is supplied buy one of the two ports on the VAC block.

Air temp was run off GM air temp which is located at the base of the airhorn on #4 cyl filter which can b easily switched out in seconds for the stock or factory one.

Honestly these things are a no brainer to make work. Its very oldschool technology were talking about

Do you have a video of this, if you do posted it up in the Pits.

Im gonna give these things about a week on here before their going on EBAY.

I "REALLY" need the money....

but who doesn't now-a-days! LOL

Originally posted by 420agreenvilleSC
so where's the provision for the MAP? what about IAT? ok last one, what about the TPS...

make this work and you'll have a buyer

come on fellas...

Make me a reasonable offer and l might consider it.

Please add your zip code and location. You wouldn't want the ghosts to lock it. It reminds of a custom setup for honda's.

updated profile.

someone please buy this!
Anyone with megasquirt of any standalone thats N/A really needs these!

PM me a price for the ITB's minus the venom fuel rail, injectors, alternator, filters, and vaccuume block to 29301!

Originally posted by Slo2g
PM me a price for the ITB's minus the venom fuel rail, injectors, alternator, filters, and vaccuume block to 29301!

PM sent!

I sent it through your username on this site.

LMK if you got it.

Originally posted by Slo2g
PM me a price for the ITB's minus the venom fuel rail, injectors, alternator, filters, and vaccuume block to 29301!

Oh yeah, my offer stands without all that crap as well (except the vac block. I don't feel like making one of those). I got no real need for any of it.

Originally posted by bullettdsm

Originally posted by Slo2g PM me a price for the ITB's minus the venom fuel rail, injectors, alternator, filters, and vaccuume block to 29301!

Oh yeah, my offer stands without all that crap as well (except the vac block. I don't feel like making one of those). I got no real need for any of it.

What was your offer again?

If you want hit me up through PM with an OFFER.

Never mind!

I should have checked my PMs. LOL

Got you offer, sounds good.

Any other parts for sale?

Maybe that aeromotive FPR....

If you got a nice fuel setup, lines, rail, FPR and fitings.
Give me some info I may be interested....

And good luck with the sale. If I had my car running NA I would be all over that ITB setup.....

Originally posted by Cyexmaster
Any other parts for sale? Maybe that aeromotive FPR.... If you got a nice fuel setup, lines, rail, FPR and fitings. Give me some info I may be interested.... And good luck with the sale. If I had my car running NA I would be all over that ITB setup.....

So you need a fuel system....?

Just sent you a PM reguarding everything i got.

Originally posted by unknsldr
Got you offer, sounds good.

Agreed. Just send me paypal info. (I posted this to be sure you saw it, lol)

Nice, glad to see these going to someone who will put them to the test!

+1

Hope to see Mark get some nice results with these....


Mark,

Please keep us informed when you get those baby's on the car...

SOLD to "bullettdsm"


Im sure he will enjoy them! Throttle response was ridiculous along with the full throttle growl.
Tuning will be a breeze with standalone.

Originally posted by Cyexmaster
+1 Hope to see Mark get some nice results with these.... Mark, Please keep us informed when you get those baby's on the car...

I hope to see some good results as well. More like, curious to see what I will get for results. I'm not entirely sold on the ITB's helping me but I need to check them out to see where they stand.

And, of course, results will be posted :thumbsup

Appreciate the deal.

And guys, and don't overlook the other items unknsldr
has for sale

awesome. can't wait bullett

Originally posted by bullettdsm

Originally posted by Cyexmaster +1 Hope to see Mark get some nice results with these.... Mark, Please keep us informed when you get those baby's on the car...

I hope to see some good results as well. More like, curious to see what I will get for results. I'm not entirely sold on the ITB's helping me but I need to check them out to see where they stand. And, of course, results will be posted :thumbsup Appreciate the deal. And guys, and don't overlook the other items unknsldr has for sale

Thanks for the free bump bro!

Like "BULLETTDSM" said, I do have some good fuelsystem parts for sale !

I've also got a AEROMOTIVE AR1000 fuel pressure regulator also in "GREAT" shape. Worked great on my DSM.

Comes with two -6an 3/8 barb fittings and a -6an plug.

Also includes a Pressure gauge too

price- $120 shipped
PAYPAL ACCEPTED















Also, i've got a like new WALBRO 225lph fuelpump W/-6an or 3/8 barb fittings.
comes with sleve and intalation bracket.

Price- $75 shipped












Also for sale a BRAND NEW, JEGS racing inline replaceable/ serviceable fuel filter housing with -6an and or 3/8 barb fittings.
also comes with two replaceable filter elements.

price- $35 shipped
PAYPAL ACCEPTED

BTW...

034 Standalone is now SOLD!