Please check out the pictures below and let me know if you are interested in anything. Don't see or like the price? MAKE AN OFFER.



FAL Fans - $100
OEM Fans (2) - $30
OEM Starter (2) - $50
Starter Plate (3)
Flex Plate (2)
Battery Brackets
Valve Cover - $25
1997 MTX ECU (2) - $40
1997 Fuel Rail - $20
1995 Fuel Rail - $20
Injector Harness (2) - $10



OEM Driver's Half Shaft - $30
Aftermarket Pass. Half Shaft - $30
OEM Pistons/Rods (good used)
OEM Differential (2)
Misc. brakets/mounts
Alternator - $50
Exhaust Manifold (2)



OEM Cam shafts (3 sets) - $25
OEM Cam gears (4 sets) - $15
Parts Dinosaur Mechanical Tensioner (good used) - $20
OEM Water Pump - $10
OEM Crank Pulley - $25
Bumper Brackets
OEM Crank spockets (2) - $15
Dodge Neon 3.55 Trans - $200


Intake Manifolds (1 ported for 60mm TB) - $35


Cylinder Blocks (all have good mains) - $75

PM sent on fans.

PM sent on tensioner.

PM sent on pistons/rods

PMs replied to.

how much for the driver and passenger axles? I know you said 30.00 for the driver side, how much for the passenger. How many miles are on them?

How much do you want for the things that cover the bumper holes by the fog lights?

Thanks

$30 each for the half shafts. The driver's side is an OEM with 32,000 miles on it and the passenger side I bought from Advance Auto Parts earlier in the year and put only a couple thousand miles on it.

I will through the bumper inserts in the box. Send me your zip code and I can get a shipping quote together.

Thanks,

Replied to your PM.

zip code is 87108

Originally posted by barza21
zip code is 87108

I guessed about 30 LBS and UPS is saying about $40 to pack and ship it, so that will be $125 shipped for you.

If you're interested, my PayPal address is turbodoug@gmail.com

Thanks,

where are you located? im interest in a block.

Middle Tennessee. 37153

Dougie,

Lower water pipe. Tamarac, Fl. 33319

Sorry, lower water pipe is already gone.

Still have most of this stuff... including the fans... make an offer guys...

When you already had two good spare blocks, what made you get the third? If these are spare, do you have a fourth squirred away "just in case"?

Corbin
'95 ESI-T

Now with more power and fewer leaks



Humble servant of the Wiki

Originally posted by Corbin
When you already had two good spare blocks, what made you get the third? If these are spare, do you have a fourth squirred away "just in case"? Corbin '95 ESI-T Now with more power and fewer leaks Humble servant of the Wiki

Lol thats what I was thinking.

Originally posted by Corbin
When you already had two good spare blocks, what made you get the third? If these are spare, do you have a fourth squirred away "just in case"? Corbin '95 ESI-T Now with more power and fewer leaks Humble servant of the Wiki

I can't remember the where and why on these blocks, as I've had them for years now. I've been around a lot of DSMs and started my own engine and fabrication shop a few years ago, but I've had these blocks sitting around even before that time...

Actually, I just remembered that two of these spare blocks came with one of my 2GNTs that I bought from a friend, and before that I already had a couple spares to use as backups. With luck, and some good tuning, I haven't had to use them. Gotta love the 420A!

Originally posted by Corbin
When you already had two good spare blocks, what made you get the third? If these are spare, do you have a fourth squirred away "just in case"?

I got 4 sitting on my garage floor as we speak, lol (actually 2 of them are on dollies). One has a set of 10.5's in it, ready to go.

Just need to stay prepared for the future. I mean, you guys do have all those canned goods stored away with the guns and ammo inside the bunker, right?

You just never know.........

I still have the Flex-A-Lite fans... and almost everything else guys...

PMDDDDDDDD

how much for the coolant reservoir?