I've got a 1995 Eagle Talon 420a that I'm finally ready to part with. It's been my baby for 8 years and gone through a complete transformation... but I've got too many other expenses these days to keep funding the car.

I am very interested in getting rid of the entire thing as a complete package, but I know that is unlikely. As a second option, I would like to see the entire turbo/fuel/engine management package to someone who is serious about turboing their DSM. I have the parts capable, if you engine can handle it, of putting you in that 400+whp club. Contact me via PM or email if you're interested.

As this isn't a formal for sale thread yet, I haven't compiled a full list of parts/modifications, description of the car, etc. But here in info from my profile, all of which is on the car at the moment. There are also some additions (like drag radials in the front) since the profile was updated but that's the majority of it.

Also note I just had a new timing belt, pulleys, and water pump installed about 200 miles ago. Still on the first tank of gas since the work lol.



I have the following sitting new in box that I just haven't installed and no longer want to:
- Complete Megasquirt EMS kit from Symtech
- FIC 1000cc injectors
- Aeromotive 1:1 AFPR
- Innovate LC1 wideband

Turbo parts:
- Garrett T3/T04-S 60-1 turbo
- Star exhaust manifold
- TiAL 38mm polished external wastegate
- custom 3" downpipe + full 3" exhaust (made by me)
- 2.5" Tsudo N1 catback exhaust sitting in a box
- might still have the 2.5" Star downpipe somewhere
- Spearco 20x10x3 FMIC
- custom 2.5" polished charge pipes, both the plumbing for my setup and a box of spare pipes and couplers
- Synapse Synchronic BOV

Engine, bottom end:
- 2.2 L Howell stroker
- Clevite 77 main and rod bearings
- Eagle H-beam rods
- JE forged 8.6 or 8.8 pistons
- Total Seal piston rings
- AF/X UDP
- balanced crankshaft and rotating assembly
- Melling oil pump
- Carter water pump

Engine, head:
- Crane 14 turbo cams
- AEM Tru-time adjustable cam gears
- Crane valve springs
- stainless steel valves
- 3 angle valve job
- port and polish
- Eaton PTC rockers & lifters

Fuel and electronics:
- Vortech SFMU
- 4G63 450cc injectors
- Walbro 255 HP
- 6AN SS fuel lines and AN fittings
- modified 97 fuel rail
- in-line fuel pressure gauge
- Prosport 60mm boost and oil pressure gauges

Drivetrain:
- Non-modular clutch conversion
- Clutch Masters stage 3 with street disc
- Fidanza lightweight flywheel
- B&M short shifter

Suspension, wheels and tires:
- H&R Sport springs
- KYB AGX adjustable shocks
- custom rear camber correction spacers
- front and rear strut tower braces
- rear lower tie bar
- new OEM rear lower toe control arms and eccentric bolts
- silver 17"x7.5" Konig Verdict rims with 245/40s
- also have a set of gunmetal 17"x7" ADR GT knockoffs with tires
- drag radials up front
- ProStop ceramic brake pads

Body, sound system, other:
- 99 eclipse front bumper conversion
- 99 black housing eclipse headlights
- 95 eclipse rear bumper conversion
- eclipse tail lights, costom wired different from eclipses
- 20% tint sides and rear
- Alpine head unit
- Clarion mids up front and 6x9s in the rear
- wired for subs but they're removed. Still have them... Legacy 1400w amp with dual 12"s in a Q-logic box
- center vent gauge pod for boost/oil pressure
- custom gauge cluster with empty pod next to tach waiting for wideband
- two valve covers, one shaved and gold, the other green to match the car



Can get up to date pictures, but these are over a year old with the previous turbo setup (50 trim) and whatever else... gold wheels are now silver with DRs...

I LOVE your car. free bump

I may be interested in the turbo and WG. PM/email me with pics and price.

First dibs on the udp?

Thanks EZ!

I'll let you guys know on the parts. I'll respect your dibs if I choose to part out later, but I'd really rather sell large chunks at a time... like ALL of the turbo parts, or ALL of the fuel parts. Unfortunately if I start selling piece by piece, I'll end up with a torn apart car and a pile of misc. parts sitting around for months.

It's not my daily so I only really drive it for fun on occasion. As of 2 weekends ago, it ran perfect. Pulled hard, felt solid. Then all of a sudden about a week ago, the next time I drove it, I started it up and it was making awful noises... sounds like a diesel. So I'm sure something broke internally, I need to check some things out when I get some time. This was the straw that broke the camel's back... I've had problems and broken things like everyone else that pushes their limits and it's just gotten to the point where I can't do it anymore. The last two times something broke I was reluctant to stick with it, and now the 3rd time in one year is enough to call it quits. It sucks, but I'm sure many of you can understand. So anyway, for anyone who may have been interested in the motor, probably bottom end, don't get your hopes up. But otherwise I'd got quality packages to offer.

I'll try and get better pictures soon, but I'm heading out of town for the weekend.

pmd regarding fuel /ems setup.. thanx

I just got back into town. I've got several PMs so I will respond to everyone as soon as I can. Thanks! More/better pictures will come as well. And this will become a "for sale," I've made up my mind lol.

would you want to sell the whole car? if so how so how much and where are you located?

Sorry, not selling the whole car as-is. The engine's shot and it's in no shape to run unless you want it in that condition lol... I haven't had a chance to pull it apart yet, I'm still stripping parts off the car. I will sell all turbo/fuel/ems parts and then swap a stock motor in and sell the car that way.

Sorry for those of you who have PM'd me... the parts list, pricing, and pictures is coming. I'm just extremely busy at work then it's hard to make much progress on the car when i's dark and 30 some degrees out in the evenings... just a car port, no enclosed garage.

thanx for the update chris! Im still extremely interested in the fuel/ems, cant wait for pix