I'm getting out of the game and these are the things just laying around that I need to sell. There will be a LOT more once I get the car back to stock so look for that post soon. If you're interested in a part off my turbo setup let me know and I will reserve it for you. List of my setup is at the end.

Block + flywheel/clutch + box of associated parts (some surface rust in cylinders, I touched part of it lightly with some 2000 grit wet paper and it came right off, I would recommend honing with any build though). Btw yes the oil filter is obliterated, I couldn't get it off with my hand, tried the screwdriver through the filter trick and it shredded it. Need some vice grips and a hammer to get the thing spinning but I'm caught up moving and don't have any more time. I planned to rebuild this block but now I want to sell the car and have no need for it. I'll sell the box of stuff I pulled off of it abd the flywheel & clutch with it in one package.







$100 FIRM, buyer picks up or pays freight

Headstuds, note the part # and all washers & nuts and the original assembly lube are there:







$100 shipped

Valve cover, has some sticky crap on the back corner of it from a sticker that was on there but some alcohol or acetone will take it off. Bought to powdercoat, never did:



$30 shipped

Lifters & rockers mixed together in oil to prevent any rust, can't pull em out and get my hands dirty to show oiling holes but I assure you they are legit and brand new. I'll take more pics upon request. I got a great deal on these, I'll pass it on to you:



Lifters: $60 shipped
Rockers: $60 shipped

HKS SSQV mounting flanges, one aluminum and one steel. The aluminum one is made to be clamped on but CAN be welded. The steel one is made to be welded. No pics, can take some upon request.

$15 shipped each

420A head, great condition. Comes with both cams, all the cam caps in order. Inspected the surfaces of the cam caps & journals and they are mint condition. I bought this to minimize downtime during rebuild but will not need.





$125 shipped

OEM lower engine gasket set + 4 large block plugs (part #04556018AB
). You will need the 2 more small plugs to finish a bottom end rebuild. I got these from a Mitsubishi dealer and they discontinued the part, but you can get em from Chrysler. I paid $63.10 + shipping for this set. No pics, can take upon request.

$50 shipped

Prosport water temp gauge, brand NEW. I got this as a birthday gift from my fiance before she knew I was getting rid of the car. I don't need it so I'm selling it. Here's the exact gauge I have, and thats the price she paid:
http://www.machv.com/prwatega.html

$30 shipped

My turbo setup to be parted in the next month:
Walbro 255lph HP pump
Vortech 12:1 FMU
Star replica manifold
Tial 38mm replica wastegate
T3 Super 60 trim .63 A/R turbo (Ebay brand, spinning great, NO shaft play, great turbo)
Treadstone downpipe modified to mate to exhaust & modified for radiator+fan clearance up front (spent a LOT of $ on this)
Treadstone wastegate dump tube
Oil feed line- 4an SS braided, 2 straight ends, 5ft (a little long but works great). Will include parts to tap block for feed.
Oil return line- 10an SS braided, 1 straight end, 1 45degree. Will include flange to mate to turbo.
FMIC with entrance/exit on driver's side + short route piping + all clamps & couplers
Prosport mechanical 52mm boost gauge
Hallman pro MBC
Symtech FCD
HKS SSQV limited edition black BOV
2-gauge pillar pod from MachV
42 Draft Designs vacuum manifold

PM me if you're interested in one of these parts and we'll talk prices, for now they are NOT listed with prices cause they're still on the car. There will be another post soon for those.

PM sent..

Replied.

Pending sale of head studs

pics of fmic and piping... and price.

Cyrex, unfortunately I'm at work and have no way of getting those pics right now but I will give you some when I get home.

This link is of the exact IC I've got:
http://cgi.ebay.com/ebaymotors/CXRacing-INTERCOOLER-FMIC-29x8x3-5-1-SIDE-Talon-Eclipse_W0QQitemZ380144863975QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item5882664ae7&_trksid=p4506.c0.m245

Very nice IC, still looks new too. No bent fins or anything like that. The piping was made by me, it's aluminum, 2.5", comes at a 45-degree angle off the turbo going toward the driver's side, there are 90 degree couplers on the IC inlet/outlet so this pipe goes directly into one of them. And the other pipe comes straight out of the other coupler, does a bend upwards, and mates up with the stainless steel upper intercooler pipe w/ HKS flange that Terry made. The UICP is gonna be $80 (I paid $100 for it to use it for like 2 months) and is heat wrapped. Most of the other pipes are heat wrapped too. And all the couplers are high quality 3-ply silicon, blue in color. Hope that gives you an idea.

I'd do $200 shipped for the IC and piping (got near $400 in it) and $80 for the UICP if you want that too. I don't have pics of it but it looks great wrapped. If you wanted though, you could take off the wrap and give it a nice polish and it would be very bling.

You can KINDA see how the FMIC sits in this pic, only thing I've got. Saw it while looking at post I made for my dad to sell his bike not too long ago figured its better than nothing

Make offers on this stuff, guys. I need to get rid of it, I have a wedding coming up and I'm in the middle of a move.

pm'd.

Block is pending sale locally

Rockers sold

Everything else remains, make offers.

If anyone has a P71 police interceptor 2001+ I'll trade the car and everything I own and even have my gf bake you a fresh batch of home made chocolate chip cookies and throw those in as well.

PM'd

Head and headstuds sold

Looks like I'm not gonna be able to pull the turbo setup next weekend, going to the beach, but the weekend after I should have time

So if ppl need this stuff I have available now I'll sell it. Or if you're interested in something I haven't taken off yet lmk

post pics of the FMIC setup when you get it off.

Block is sold, bottom end kit is sold, waiting on it to get cooler outside to take the turbo setup off

bump

Turbo, manifold, bov, downpipe, and oil lines may be spoken for. I plan to get all this stuff off the car next weekend (10/9-10/10) so expect another thread soon.

pm'd