Need one shipped to 29369. I have paypal. I kinda only need the bolt with the slider. Don't need the bracket or pulley.

Take the bracket off, and get a smaller belt. Tension with the PS pump.

I can look at the belt size in a minute.

But, if you want one, PM stangmurdera. He parts out 2gnts and since he is in Concord, you will get it within a day or two.

Originally posted by Warmage12
only need the bolt with the slider. Don't need the bracket or pulley.

sorry. the bolt and slider are not sol individually. at least not anywhere except for steven or a user on here. The bolt is reverse thread so good luck finding that if that's all you want.

by the way, i've broken two of those bolts, had massive squeeling from the bearing tensioner, so, in this case, take tims advice. Go with a smaller belt, and use the PS pump to create tension.

the belt size is on a recent thread. just search.

Originally posted by 420agreenvilleSC

Originally posted by Warmage12 only need the bolt with the slider. Don't need the bracket or pulley.

sorry. the bolt and slider are not sol individually. at least not anywhere except for steven or a user on here. The bolt is reverse thread so good luck finding that if that's all you want. by the way, i've broken two of those bolts, had massive squeeling from the bearing tensioner, so, in this case, take tims advice. Go with a smaller belt, and use the PS pump to create tension. the belt size is on a recent thread. just search.

x3 for negating the tensioner pulley. but if you do really need one i should have one i can sell you for like $10 shipped. just let me know. i can send it out monday morning with my other shipments.

i have one...20.00 shipped