well I am looking for a crank sprocket, the one that has the timing mark on it. Mine busted just where the timing mark is so....

PM me if you have one.

buy a new one, they're cheap: check out mitsubishiparts.com

Check

discountedmoparparts.com and search under "mopar/chrysler" parts (same thing),

and http://www.trademotion.com/partlocator/index.cfm?siteid=214619 for "mitsubishi" parts (cherry hill triplex)...

i searched a random part number, it was $36.75 at dmp.com and $45.20 at cherry hill...the site in the previous post wants $46.49. The two sites i reference as the two cheapest i've found scouring the internet - i dare someone to find a site that has a cheaper price.

That said, your specific part lists for 18.20 at any local mopar parts department, and the mopar place i listed above its 13.56 + shipping.

http://www.trademotion.com/partlocator/index.cfm?action=getJointLocator&siteid=214666&chapter=&Sectionids=10,0&groupid=10007&subgroupid=61911&componentid=0&make=7&model=Sebring&year=1999&graphicID=CHP020&callout=17&catalogid=1&displayCatalogid=0

I bought one from a local Mitsu dealership for around $17

Most of the online dealerships charge a minimum $10 for shipping. You would be better off buying local if you have a dealer near you.

could you post the part # for me to ask at the dealership?

I have one for you CYE

Part# 04667604

If anyone needs part numbers, go to this page:

http://www.berrysprinter.com/e-fiche/model%20years/CD3/97-01/

pick your year/model car. IE, a 99 would be 99FJ.pdf - it has every part in it. Just pick the parts for the talon. Eclipses, along with talons, sebring coupes and avengers are the FJ platform.

Or use CAPS on this site to get part numbers. I've just found the above pdf's more useful. The part numbers work at both mitsu and mopar dealers. Sometimes you have to add a "M0" to the front of a number at the mitsu dealer to get it to work.