Got some stuff to sale. This stuff I either took out of my talon to replace with aftermarket or just took out because I didn't need / want them. I have pictures or can get pictures of any thing.

For Sale parts
Stock Valve train, 70k on them, Includes valves, springs, retainers, lash adjustors, rocker arms, and stem locks - $50
2.5” Test pipe, has bolts and gaskets brand new - $25
Stock 420A cams, 70k on them - $20
Single pillar pod gauge holder - $10
Flat 3 gauge panel - $5
Flat 4 gauge panel $5
Autometer Pro-Comp Ultra-Lite Water temp gauge, with sending unit - $30
Autogage 10k RPM tach. I’m guessing a 6” w/ shift light, Was in my talon when I got it - $50

Send me pics of the 3 and 4 gauge panels to widersturbo@aol.com please

pics sent

send pics of the 3,4 gauge panels, plus the temp gauge please to simmonsx5@hughes.net

how much for shipping on the valve train and cams?

give me a zip and i'll let yea know.

post pics on here for the 3/4 gauge panels plz

Also have a WTB list
I'm lookin for all 4 engine mounts both sides, front and back roll stops. Can be blown torn destroyed as long as the metal parts are in good shape.

then im looking for the compression lower arm assembly and lateral lower arm assembly both sides and rear lower arm assembly and the "tie bar" i guess you'd call it on the rear. What im looking to do is to jsut replace the bushings in them with the prothane ones and then swap them onto the car so i dont have to have the car off the road for long.

If your confused one witch parts i need heres some pics:
I need #8 and #3 on thise one

and #6 and the one skinny peice that comes out behind the brake rotor there in this pic.

zip code is 23897.

Pm sent.

Also just picked up a set of rear KYB AGX struts. kid said he had them on the car for around 3 years but only driven the car less then 10k. theres some rust around the mounting points. make an offer on them.

also have to a front and rear set of roll stop inserts. i think their Prothane or ES cant remember. Brand new deicided i wanted solid mounts instead.

one more thing. this is for local people only tho. I built this setup for my talon but deicided i dont want a sub in the car now. to fit this you need to take out your spare tire and holder in the hatch area. heres a pic:

cams and valvetrain sold. Tach might be sold too.

Bring this back from the dead! Heres what i got and adding stuff. Remember prices dont include shipping
Single pillar pod gauge holder - $10
Flat 3 gauge panel - $5
Flat 4 gauge panel $5
Autometer Pro-Comp Ultra-Lite Water temp gauge, with sending unit - $30
Autogage 10k RPM tach. I’m guessing a 6” w/ shift light, Was in my talon when I got it - $50
stock intake mani, has some port work done and gasket matched - $50
Symtech intake spacer/isolater - &70
Coil pack with pigtail on the plug, Worked good when i took it off the car to upgrade to the screaming demon coil - $50
AGX rear sturts, got them with a set of springs i wanted. Kid said hes had them for 3 years but only put maybe 10k on them. - $BO
Sub box made for the hatch area, Sits flush with the floor and requires you to cut out the spare tire stuff. $75 and must be picked up.
Got some other stuff but i'll post them later when i deicide what i want and dont want. I can get pics just ask

More stuff
Autometer Cobalt Boost Gauge, Brand new only opened to look at - $60 or trade for sport comp series
Autometer Cobalt Wideband, Brand new only opened to look at - $250 or trade for sport comp series
Autometer Cobalt Volts, used but works still. - $75
Alpine 12” Type-E sub, Used for maybe 5 months - $50
Rockford Fosgate P2002 amp, used for around 2 years - $100
Polk Momo 6x9 3 way speakers, Brand new never used just opened - $150
Glowshift Tinted Vacuum gauge - $20
Glowshift Tinted Oil pressure gauge -$25
Glowshift Tinted Air/Fuel ratio gauge -$40

addind a 4-1 Header with downpipe w/ flex section welded in. 50 +shipping