I'm going a different route than I had originally anticipated and need to raise funds. If you can pay by Saturday morning I'll let all the kit go for $1000; Later than that and I'm asking $1300. The turbo has about 15k on it.
Turbo kit
It is a complete Hahn Stage 2 kit:

s16g Turbocharger (No shaft play)
HKS SSQV
SMIC with piping/couplers
Hahn turbo manifold (Tapped for EGT probe)
Oil Feed/Return lines
Hahn downpipe w/ flex section.

Extras included -
Autometer Vac/Boost gauge
Autometer EGT Gauge/probe/sender
Black 2 Gauge A-Pillar Pod
Walbro 255HP In-tank fuel pump.
Synapse Missing Link
Vortech 12:1 FMU

I also have a Hahn FMIC (No piping) for an additional $300 if you buy the kit, $425 shipped, otherwise.

What you will need:
Exhaust manifold studs/nuts/washers (You can get these at NAPA for about 8 bucks)
A Tee-fitting for the oil feed.
An -8AN fitting for your oil pan for the drain.

Also for sale:
Venom intake manifold (Sized for a 60mm TB) -$300 shipped

Edit: I forgot to add, that the turbo and related parts are already off the car and ready to go.

pm sent

quick question, when you say "fitted for a 60mm tb", does that mean it only works with a 60mm tb, or does it also work with a stocker?

thanks

Originally posted by barza21
pm sent quick question, when you say "fitted for a 60mm tb", does that mean it only works with a 60mm tb, or does it also work with a stocker? thanks

It was my old manifold. It is bored out to 60mm to accept a TB, but it would work with a stocker as well...

FMIC has sold. Kit and Manifold still up for grabs.

Kit is pending. Manifold is still for sale.

Kit is gone manifold still for sale.

I made a new thread for all of my parts, please lock.