Spare gauges i have laying around:

electric fuel pressure - Silver face/procomp - no sensor: 25.00

Electrical oil pressure - phantom/white face - with sensor: 35.00

EGT gauge - pro comp/silver face - no probe: 35.00
buy a TRE probe


Stage 2 MIBA custom clutch. 8k miles, built to handle 350whp daily. had this custom made. Pedal feels like. The clutch is made to take abuse liek Kevlar without the side effects accordign to the comapny that made it (Zume Clutch). 300.00 shipped

Derale 7" electric fan 400cfm low profile from summit racing new cost 72.00: 35.00 + SHIP

HKS BOV for sale with 2GNT upper IC: 150.00 valve only 185.00 with pipe.

3" Jet hot coated Downpipe for Star turbo or Treadstone setup:250.00 (sold to Kirby)

neuspeed strut bar (chrome) new never used with hardware kit. 100.00

RRE strutbar 75.00







various 4an lines, all suitable (long enough) for oil feed lines: 15.00 each

2-Star Turbo Intake pipe with blue coupling 10.00 each

2-Red valve covers one red nice the other could use repaint:25.00

Various suspension control arms for front (complete set)15.00 per arm


intake manifold (upper and Lower: 15.00

Stock Fuel Rail and 4 injectors: 25.00

Stock Starter: 25.00






All prices are plus shipping.

I do have them. 50 k on them. The entire suspension is off the same car.

Terry

I'm interested in the stock injectors. Are they in good condition. I have a leaky inj. causing wierd starting problem. Let me know.

Yes stock injectors are in good running shape.


Chris i will work on the DP picture. It is full 3" from the turbo flange to the cat flange. The wastegate is recirculated and the flex is 8" long. I do not have a test pipe but for an additional 100.00 i can include the 3" cat.

Terry

sent you a PM Terry... It may be dibbsworthy so let me know...lol

Originally posted by Star Turbo TalonChris i will work on the DP picture. It is full 3" from the turbo flange to the cat flange. The wastegate is recirculated and the flex is 8" long. I do not have a test pipe but for an additional 100.00 i can include the 3" cat. Terry

Sounds very promising, and I'm glad it's got the wastegate dump recirculated. I'll probably buy it pending pictures to verify it's the correct flange and all. Thanks for the response.

Chris, Kirby is taking the DP site unseen.

boo, I was going to buy it as long as it had the right flange.