My car was recently totaled and lucky for me my engine was not in the car yet... So some lucky soul gets to pick up where i left off... A little info on the motor...

1998 Stratus Block (Taken to machine shop for inspection, factory honing still visible, motor had rod knock), balence shafts removed (Oil passage tapped and blocked), SRT-4 Pistons, SRT-4 Rods, SRT-4 Rings, Rebuilt 2gnt Head, Stock Cams, Stock Cam Gears, New timing Belt Cover, T3 Cast Turbo Manifold, Reman Crank, Rod and Main Bearings, New Oil Pump, New Water Pump, 60mm Jeep Throttle Body, Under Drive Pulley... Thats what i remember from off the top of my head... I have photos of the motor, Still needs a few parts here and there to finish it up, mostly depending oh how you will set up the motor, nothing major (timing belt, and timing belt tensioner, idler pulley, oil pan)... Additional Photos Available Uppon Request (Some Photos Are Not Current Condition as more work has been done.)

Looking to see if anyone is interested on this board first b4 i post anywhere else, since this was the board i got most of my information from about the swap and the build... So i feel i should post here to give back to the board that gave me the knowledge.

Will consider any reasonable offer, would like local pickup but willing to consider shipping, buyer pays shipping

Well u can contact me on the board or thru my email which is j_oh@comcast.net (the one i check the most, syncs with my cellphone), or Aim: jplayya2g, and if u cant contact me on one of those three, then ur not trying hard enough... lol, jk

(EDIT: Location Nashua, Nh 03064)

Thanx For Your Time...
-J

Have you figured out how your going to get it down the stairs and outside yet?

Hahah, as for the stairs, I got it down to the 2nd foor in my storage room, so one more flight of stairs shouldnt be that bad... The way people tend to steal thing around here i wouldnt dare leaving it in the garage... We already had some kids run in our garage and make off with alot of my tools and and dropped a spare airbag i had for the 2ngt... Followed them into someones house and the cops came and said i couldnt walk into someones home... I explained my situation and they still didnt do anything, as the kids hopped in the car outside and took off... Grimey...

Location is Nashua, NH 03064... i knew i was forgetting something when i posted it up, thanx for pointing that out...

-J

Umm... whats your location guy?

Well an update... The motor is still up forsale... Its here for the 2gnt members (who i credit for the writeups and information used in this build) to take advantage of this being up for sale b4 it goes for sale to anyone in the general public... I was PM-ed asking what price range i wanted to be in and i said around 1200... Resonable offers will be considered, but will be posted on other forums and sites at the end of sunday (3/23)... My contact information once again is joshua.pottle@gmail.com or j_oh@comcast.net AIM: Jplayya2g
Once again if u cant reach me on one of these three, then ur not trying hard enough... lol... well Thankyou everyone for your time...

-J