Located in south texas 78504. all prices are shipped unless stated otherwise... I will only accept money orders thanks, dan


Star FMIC with all pipes and couplers $350 plus shipping OBO


PTE SC50 turbo brand new $700 plus shipping


SFMU with all springs and disk and all the connectors from fuel rail to sfmu. (sfmu barely used)$250 by itself or $275 with all fittings


HKS SSQV bov brand new $160


Brand new silcon couplers Straight black (6) $40

oil feed and return lines Stainless Steel brand new $80 each or $150 for both. includes fittings for turbo and/or t-fitting for block

Star type manifold (treadstone) and studs washers and nuts from RRE and gasket brand new $250 manifold, $20 for studs nuts and washers or $260 for both


(3) Inline fuel filters (2) 6an, and (1) 4an brand new $30 each.

Oil pan tapped for return, it is absolutely awesome! no rust, looks
new!! plus gasket $115


obx catch can brand new $40


Tial 38mm wastegate brand new $200


all nuts bolts washers for bolting turbo to manifold $20, wastegate $12 and exhauste flange to turbo $20. brand new

3.5" 5 bolt to V-band adapter brand new $120

3.5" v-band clamps kit brand new $85


Walbro 255lph brand new $85


EXTRAS: all brand new

3" Vibrant TPV Turbo Muffler $160 plus shipping


Magnaflow Cat Converter 3" $60


Flex section 3"x6" $25

6AN hoses 10ft $30 and 20ft $55 or both total 30ft $70

Turbo heat shield for t3/t4 turbo $50

Autometer FP guage $18, Boost guage $50 and EGT guage $100

TRE EGT probe $40 or with guage $130

Vortech Fuel Filter 10an $80

Custom 6an fuel rail made by terry $100


Home made FCD by mike $20

Vacuum Manifold by golden eagle $45

PLEASE post pics of the -6 fuel filters.

I am interested in the wastegate and SMFU, PM Sent!

pics of the egt


pics of flex section

bump, prices are negotionable :)

nobody showing much interest. so the whole kit is up on ebay at a damn good price for everything it has..im losing enough money with this crap as it is..
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=013&sspagename=STRK%3AMESE%3AIT&viewitem=&item=230088838981&rd=1,1

I'm interested in s-fmu...

I am interested in the manifold and mounting stuff(studs and nuts and washers) for $260. I will have the money thursday. Let me know, also why dont you accept paypal?

i want the fuel filter and catch can, just dont have the $$$ yet, should have it by friday though!

Is the TRE probe new or used?

If new I will give you 30 shipped for it.

let me know.

OMG...just now seeing this thread.

Very interested in quite a few things actually, especially since I'm lookin at gettin that 2gnt in Virginia, and I can't go long without boost. Some parts I will be having sent from my car in Alaska, others I am replacing...


Hit me up via pm, I gotta get in contact with my buddy in AK that's watching over my car for me.

lol ok, its back! ill pm all those of you have posted....
edit: ill accept paypal if yall really want to use it.

edit2: wastgate and sfmu sold

Pics of the oil and fuel lines?

PM sent too...

I'll take the flex section...shoot me your paypal

xmasta ill get those pics up when i get home from school.

for everyone else my paypal is dani@rioplexwireless.com

EGT probe is sold

hey man whats the exhaust flange on the turbo and hoe=w big is the trim do u have any more pics

it has a 5 bolt exhaust flange. inlet is t3. it is a 50 trim
here is more info on the turbo, this is from the place where i bought it from.

Precision's line of T3/T4 turbos for Sport Compact vehicles comes standard with Precision's TA31 style exhaust housings with a 5-bolt discharge side in A/R of .60. SC50 comes with T31 wheel with either a 2.559" Inducer and 2.121" exducer (69 trim) or 2.559" inducer and 2.229" exducer (76 trim) Available with or without internal wastegate. Each turbo comes with a 360-degree race bearing center section and a T04E compressor cover with a 3-inch inlet and 2-inch outlet. Larger T04S cover with 4-inch inlet and 2.5-inch outlet available at an extra charge. SC50 has a 54mm compressor wheel that has a 2.123" inducer ans 3.000" exducer (50 trim) Supports up to 450-hp at the flwheel with proper tuning.

Part Number: SC-50
Max Rated HP: 450
Inlet/Outlet Size: 2"
Bearing System: 360 Race
A/R Ratio: .60
Garrett Compressor Wheel Trim: 50
Garrett Turbine Wheel Trim: 69



here is a pic of the oil lines which also come with the t-fitting to connect to the block, forgot to add that in the pic but batteries just died lol

it looks nice but im lookin for something bigger like 60/1 mm

sure no problem

bump

egt probe sold

sfmu and wastgate sold

manifold,fuel rail and cat pending

everything else still for sale

edit: manifold is back up for grabs

bump. feel free to make offers :)

how much was one fuel filter again?

$30 shipped