For those who haven't seen... http://forums.2gnt.com/dcboard.php?az=show_topic&forum=60&topic_id=18337&mesg_id=18343#18343

Car is located in North Pole, Alaska. If this goes down, I will have a friend or two taking parts off and shipping them on my behalf considering I'm leaving the state in a few days.Just tryin to get a feel of what's needed and what could possibly sell rather quickly. Some main items that might be available include but are not limited to:

cast manifold w/external wg flange
t3/t04e 60-1 w/polished housing and .63a/r turbine (not even 250 miles)
brand new t3/t04e 60 trim w/.63ar that was previously fs
tial 38mm wg used for less than a damn hr
megasquirt v3.0 purchased from terry over summer
zeitronix wbo2 w/optional egt sensor
turbo xs hp mbc
johnny race car fmic
short route ic piping with ssqv bov
msd coil pack and wires
autometer shiznit
green top 42#'s
aeromotive 1:1 fpr

...and whatever else I'm too tired to think of :twitch

I won't let you part her out! Rent a Uhaul car dolly so you can Tow her home. I am pulling an 18 ft flatbed trailer with my parts car on it with my Blazer, from NY to GA this coming weekend. I'm sure you can tow your car on a dolly with the Xterra. If you still have my Phone number call me.

I THINK IM GOING TO CRY!

interested in Zeitronix WB when you're ready to sell.

i may be interested in this stuff,if the coil is for late style and if price is right on wb02,also is it hte display or a gauge? Thanks

zeitronix wbo2 w/optional egt sensor
msd coil pack and wires

Shoot me a price on the injectors, intercooler and piping, and the wastegate.

hey x, if you got to sell the stuff let me know what you want for:

cast manifold w/external wg flange

t3/t04e 60-1 w/polished housing and .63a/r turbine (not even 250 miles)

and the tial wastegate

i could always use some more toys if the price is right.

toss it on a trailer, PM me a price for the whole car as is (with all turbo parts), and if we can work something out, drop it off on your way down to florida. I am not a sidetrip. straight in route.

Originally posted by BumpinTalon
toss it on a trailer, PM me a price for the whole car as is (with all turbo parts), and if we can work something out, drop it off on your way down to florida. I am not a sidetrip. straight in route.

and then you can sell me some parts :P

Hey how much you want for the
Turbo w/ manifold and wastegate??

Mbc-??

Fmic with piping and bov..???

And all combined... let me know im very interested

Sorry guys, been very busy here with everything going on and trying to figure shiznit out since I'm leaving tomorrow. I'm going back to the car today to get all the parts I can off and fit with me, then I'll post prices and some pics of most of it later on I suppose. Feel free to send me money anyways, I sure as hell could use it so I don't get stuck in Canada somewheres!

i'll take the aeromotive. just hook me up with a price.

ZT-2 sold :)

All prices listed are an approximation of what would be expected, but the parts will go to the bidder with BEST OFFER and dependent on who is willing to send money paypal the fastest so I can afford gas on my trip haha. It looks like I might just be leaving most of the parts here with a friend, and they will package/ship stuff out per my orders lol...so have a little patience with me if possible.

Also, don't know how often I can get online during my trip, but I know I'll hop on before I head out tonight or in the morning to check on who has monies for me. The best way to get a hold of me if you have any questions etc is just by calling my cell...386-793-7306 - Xavier

cast manifold w/external wg flange - $150
t3/t04e 60-1 .63a/r w/polished housing - $450
brand new t3/t04e 60 trim w/.63ar - $400
tial 38mm wg used for less than a damn hr - $200
megasquirt v3.0 purchased from terry over summer - details below
zeitronix wbo2 w/optional egt sensor - SOLD
turbo xs hp mbc - $75
johnny race car fmic - $200
custom short route ic piping with ssqv bov - $250
msd coil pack and wires - $75
autometer shiznit - details below
green top 42#'s - $100
aeromotive 1:1 fpr - $100

megasquirt - v3.0 box with upgraded 3bar map sensor, harness and sensors are still in car and have yet to be removed...they can be purchased separately new for no big deal, or my friend can go in and cut out up to the solder points etc.

autometer shiznit - all phantom series gauges, boost/vac to 20psi, electric oil pressure, electric water temp, electric fuel pressure, dual gauge dash bezel, dual gauge pillar mount in grey


P.S. thx for the monies Josh :thumbsup

Hey X, I don't know how far you've travelled already, but if your coming through seattle on the way to VA ring my phone, I might be able to hook you up with cash in hand for parts (possibly wastegate).
I'll PM the number to you on tuners.

Ill give you 450 shipped for the turbo with manifold right now

Originally posted by twinturbovenger
Ill give you 450 shipped for the turbo with manifold right now

He has the prices right beside the item, that is a pretty lowball offer.

Originally posted by totaleclipse_05

Originally posted by twinturbovenger Ill give you 450 shipped for the turbo with manifold right now

He has the prices right beside the item, that is a pretty lowball offer.

+1 ... that's kinda adding insult to injury :wtf

I'm actually heading out first thing in the morning on my huge endeavor, but not going through Seattle Randy.


P.S. I need monies

sorry didnt notice the prices, my bad didnt mean to be insulting

Ill give you 500 shipped to Ct for the
Fmic, The short route piping with bov, the boost, and fuel pressure gauge...

Is it possible to get more info on the turbo, such as where you got it and the wheel size? Also, as of now do you still have the tial 38?

Edit: Oh, and I'm refering to the 60-1.

Ill take the drivers side quarter panel...whats the price?

I need the belt tensioner for the ac/power steering. Shot me a price shipped to 37643.

Sorry, my car had neither...who needs a/c in Alaska lol.

Don't happen to have the stock GS wheels do ya? I just need one!

Originally posted by jonhix
Ill take the drivers side quarter panel...whats the price?

I doubt he is going to want to have people remove a quarter panel lol.