I would like to get a meet together, and i'm curious to how many people would want to do this, and make it worth while to drive to. I'm thinking about meeting somewhere in the middle of the 3 states, maybe western OH, or something, or somewhere in the middle for everyone who wants to go,or better yet, maybe in Toledo, since i'm originally from there, and i know many good places there to meet. For all those interested, just reply, and i can go from there. I'd say a meet at the end of May would be good. Let me know, and if you want to help out putting it together, let me know also. It would be good to meet some more people on here :) Thanks..

I am down

im in cincinati and would always enjoy meeting some of you guys and looking at your rides! i was especially hyped when i finally saw the famous klipzracers car in person! ;)

Cool, keep it comin guys! I'm seriously thinking of meeting in Toledo, since i grew up there and know the area very well. It will most likely be on a Saturday, and can get Hotel arangements for Sat night for people, and take off on Sunday. Like i said, prob around the end of May. Toledo seems to be a good central location for all 3 states. I would like to see at least 15+ cars show up, and the more the better. For those interested, spread the word to anyone with a clipse or talon, 1g,2g, and 3g's, and who would like to go. I'm always down to drive a few hours for a meet. So lets hear it fellas!

im down for a meet, i graduate at the end of may so it would badass.


96ESi Mods
apex' dunk exhaust
injen cold air intake
magnecore 8.5mm wires

I could probaly bring a few people with me however not all own a nt.

I'll go if you don't mind me dragging my ugly old Avenger out there. Like I told ya before, my Talons not much to look at yet :)

Depends, I may make the trip from Chicago

Una salus victus.
It's not about being invincible, it's about being ready; for anything.



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Intake Manifold 1/2, P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

how bout meeting in carlisle next weekend ;)

How about in Dayton OH? :thumbsup

97 Eclipse GS

OBX type H Cat-Back
Maxspeed Short Ram intake
Pacesetter header
Neuspeed Springs 1.5 inch drop
Progress Tech camber kit
16" Konig Monsoons
Coming soon (HRC Stage I)


Honda, taking the "R" out of "shirt".

>How about in Dayton OH? :thumbsup

haha come on guys! Dayton wouldn't be too bad, but thats like at least a 5+ hour drive for us in MI. If its in Toledo, it would be hopefully only several hours for people in the other states. Its a few hours from MI, a few from IN, and most places in OH, other than the far southern part, a few hours there too. I guess it kind of depends on where everyone is located who is going. If it seems like most are gonna be closer to Dayton, then might be better. I personally dont mind a 5 hour drive, but some others might..And Jesse, bring the Avenger! This meet can be a full DSM meet, including all years of Eclipses, Talons, Sebrings, Avengers, and what other DSM's i'm forgetting. Turbo or NA also. For those who are interested, post where you live, what city,and part of your state so i can see the distance for you guys..

cincinnati ohio.

plymouth, indiana


96ESi Mods
apex' dunk exhaust
injen cold air intake
magnecore 8.5mm wires

Plymouth Indiana here too.

so whats the word lets do this I got nothing better to do with my time :)

I'll go and can bring a couple of my buds and their eclipses 2. just let me know a date.
Decatur IN.

I'm in, I'll be coming from Columbus, OH.



Eric Madden

let me know where at and when, cause i'm in. I'll be rolling up from northern ky, but its close enough

Ok guys, it will be held in Toledo, OH. Now i'm still trying to put a solid date together, it will be on a saturday too. How about June 1st or June 8th? Is most of you guys' schedules free either of those days? I still have yet to find a spot to hold this, but i have a good place in mind, i will call them soon to find out if its ok to hold this meet there. Let me know about the dates though...

my open house for graduation is june 8th but whatever workz is cool.


96ESi Mods
apex' dunk exhaust
injen cold air intake
magnecore 8.5mm wires

both of the days are good for me, what about the rest of you?

swaying towards June 1st...never thought of the schools getting out...how does this sound?

Anytime is cool with me as long as it is on a weekend.

>Anytime is cool with me as long as it is on a weekend.


^what he said^

sorry i can't make it either of those dates, june 1st Sweet dreams, detroit , MI, and june 8 in in chicago for Import expo...
you guys are welcome 2 take a cruise up to detroit and visit me tho ;)

Ok here is the UPDATE!! The meet will be held on Saturday, June 1st, in Toledo, OH. I will post a NEW THREAD on this forum with all of the specifics on the meet and exactly where it is at, so you guys can hit up mapquest.com for driving directions. Look for the new thread here on Sunday, May 12th. I hope many of you can make this, i know i would love to meet some more of you guys on here :) Let anyone you know who has a DSM of all makes and years to come if they are interested. I want to see lots of cars there :thumbsup

I put this up on ASOG and Stratusphere now that we have a date. I'll keep you informed of the intrest