Hey, here is the new thread for the IL 2gnt meet for the third week of October (10-25-03). Just thought I'd let you know my B-day is this 8th! I'll be 20.

The meet will probably be held at my place agian. Look at the previous thread to find the exact address.

Peace

Can I get a Yee Haaa. Are we looking at another BBQ?

There's a laundry list of mods that people want done from the looks of it.



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

count me in. 1300 miles away. }( ill prolly bring my friend with his 99 gs if he dosent have anything else planned. maybe i can find something to have installed while im there. dont wanna be far from the crowd.

ack! i am excited. sorry, just whoring.

ps. gotta bleed my clutch when i get there. :thumbsup

bbq=yes
installs=yes
beer=better be
naked women=prob not
my car running=maybe tonight

I will be there FINALLY lowered and hopefully with my new seats in...if they come any time soon.

Hey Chris and Mike. Are you guys still down to help put the rear sway bar on, maybe the front too, the timing belt and acc. belts, and do the clutch restrictor? I know its a lot so I was wondering if maybe we could hang at someones house for the night and do the majority of that shit the next day... if thats not asking too much. Otherwise, if you guys want to come out to this neck of the woods and give us a hand that would be great too. Then we wouldn't have to waste time at the meet doin all that strenious work:). I'll talk to you guys on AIM to figure it out more. Maybe if your not doin anything you could come back with us and stay out here for the night and start work the next morning? I dunno... I'll just talk to you on AIM.

^^^^that reminds me, do you guys want to help me change a timing belt and remove the balancer belt stuff on my 4g? :bowdown

I'm down, but WTF is a 4g? Did I miss something?

Yea, we still gotta do the rear drum to disc conversion for my car too, Cereal5 should bring it with him i think...this install will probably be a snap for you pros:)

Quote
I'm down, but WTF is a 4g? Did I miss something?

4g63. he's talkin about his 1st gen.

______________
Chris
96 ESI 5 spd
Milwaukee, WI

Shockeclipse: "IF YOU LISTEN TO ANYTHING I POST PLZ DO IT AT YOUR OWN CAUTION FOR I AM GENERALLY AN IDOT."

00110010010001110100111001010100011100110010000001100001011100100110010100100000011001110110000101111001

as of now, the meet is at my house, and it will consist of installing my soon to be fully built head

I'll more than likely be going with Chris. I can bring something as long as it isn't perishable as it would be riding 2-ish hours from my house to Chris', then another 2-ish to IL. Let me know what I can bring on here or AIM or email or whatever, see sig for my email and such.

bring anything you want, just no explosives, or any of the such, hehe

After reading the other IL meet thread, I've realized there's too many Chris' from WI/IL, that's like what, 3 of us? Geez.
</pointless nonsense>

Anyways, what does everyone like for soda?

coke is good. :thumbsup

<-----beer/vodka/rum......anything else really, damn irish jeans

I dunno, I'll probably bring some more code red again. Hey Silvernt. Where you been on aim?

is the meet in bartlett? i thought that was babyb's house. maybe it is not. i will need to know so i can change my plan if needed. no need to get lost. :+

Hey dice, chris's house is just down the way from Brian's. Its about 20min north, north east of there. Its really easy to get to. Hey Chris, Stef and I are gonna come extra early so we can secure a good spot next to the driveway:). I'll give you a call if I don't talk to you on AIM.

alright. can someone post the new address so i dont have to take a detour(sp).

This is to Chris's house, if the meet is going to be there...

929 sparrow ct.
palatine, il 60067

What to bring... hmmm.... Women. Attractive, single, legal women.

Diet Pepsi's good for me, I'm not sure I'll have room to bring anything in my car but tools, the way you guys are going...



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

this is gonna be hella fun, i can't wait to finally see some turbo 2gnt guys. This area is finally getting somewhere with meets and all and it's gonna be great to meet all you guys. I've heard alot about all of u from nackers.


VW= The joy of driving
DSM= The frustration of fixing

Yea, I can't wait.......MUAHAHAHAHAAHA}( I think I'm gonna learn a lot from you guys...maybe someday I will be able to do some of the work on my car lol

ya, hopfully if i get my new head in the mail, ill have it installed before a take the treck to illinois.:D

Damn... I can't believe that its still 20 days away. Chris, I think I'm gonna get a hold of you to see if you can help us put the belts on sometime maybe this weekend. The only thing is we have to get it done in about 7-8 hours. Think we can do it?

maybe ill show up and offer someone to race me }( }(

james i hope u can make it, i was thinking i'd have to find u just to see ur car. sorry i haven't been on ur site in a while, i kinda had to work alot. hope to see ya there.


VW= The joy of driving
DSM= The frustration of fixing

cant wait. im in... i think the twin talon may be coming.. we'll see.

YEAH got my teins in the mail this weekend so I will definately be lowered by then. Hopefully I can have some of my interior done too.

God... I don't know if my car is gonna last long enough to make it to the meet...

Still can't get that fuel pressure down! And yeah... we have the dreaded compression test tomorrow...

new address as of now,
929 sparrow ct.
palatine, il 60067

any updates will be posted, bring burgers, hotdogs, drinks, post what your bringin so we dont get too much of one same thing, im bringin propane, and some burgers/buns

ill try and make it.. i kinda doubt it though.. its about 5 hours from me.. i do have some friends up there i could go see at the same time..

who knows.. ill see what i can do.

James

james, since ill be going up there friday/saturday we can drive together. i'd be cool to have a bunch of people.

well I'm in and she's running strong at 12 psi so hopefully 15-16 will not be a problem by then, and she can come with. Not that i mind driving the 3.2TL but its just not the same... Hopefully the road down there will be a little better by then.. damn Illinois construction hehe.

Quote
james, since ill be going up there friday/saturday we can drive together. i'd be cool to have a bunch of people.

where are you at again?

James

this is getting nuts......think I'll start by bringing some more Mo' Dew to go with the code red.

Hey James you should really go! Hopefully my Apexi Rev/speed meter will be in by the meet and you can help install}( :o :7 :* I noticed you have one btw...hmm...I think I will also be bringing some beverages...we should make a sign up list er something....a list of all the stuff that need to be brought...then we could just copy and past our names next to it...sorta like how they do with the group buys?:shrug I dunno wtf im talking about, im excited:7

james, im in florida now. but im driving up to the southwest subs. im gonna be in carbondale to visit my brother on the 23rd/24th, more likely the 23rd. ill be giving you a call when i get into carbondale.

Quote
james, im in florida now. but im driving up to the southwest subs. im gonna be in carbondale to visit my brother on the 23rd/24th, more likely the 23rd. ill be giving you a call when i get into carbondale.

sounds good.


as far as the ill meet.. im not sure if i will make it or not.. that weekend is my birthday.. ill be 25

James

wow, only about a week and a half away!

Hope all of you guys can make it. James, I'd race you but I still need to get an intercooler and then install my injectors }(

Sorry I haven't been on much. I've been limited to my internet access. My computer at home is givin me crap so I have to use my school/work computers. If anyone needs to reach me for anything email me at bkosobud1@millinfo.com (I can't remember if I need the one at the end of that or not)

If anyone gets lost or something give me a call 630-202-9067 (Brian aka babybeclipse-turbo automatic GS :P )

Anyone still comin from Ohio?

Oh, by the way-I'm having a birthday party this saturday 10/11/03 at my house in Bartlett. Ur all invited if you can make it! Just call me or something so I know ur comin

intercooler and injectors.. thene verything else i have you dont' hehe

James

looks like ill have the beast running, i have all the rockers/lifters/gaskets, head should be done this friday(milled .025, crane springs, stainless valves, 5 angle valve job, mild porting) most likely, ill be shootin flames, lol
L8
Chris

Quote
intercooler and injectors.. thene verything else i have you dont' heheJames

Ya, that's dyno time lol

well, only thing you really have on me is cams and came gears. My heads ported/polished (by Eddie Fierro) and the block is built :thumbsup

Well, my stock stall torque converter doesn't help tho....

and brian s20g>t3, think about this, 329hp at 16psi, i wonder who would win :shrug

btw brian: reamatch at the meet, from a stop and roll afterwards. dont chicken out, now that i have a true 10.5:1 compression setup. and those stainless valves and 5angle valve job wont really add any power }(