Hey guys. I purchased a HRC Stage 2 kit and am currently waiting for it to come in. Anyway, I was just curious how you would launch with that kit? I've heard that it spools to full boost at 2700 rpms (is that correct?). I know how to launch N/A. I just want to know what I do with this kit. Thank in advance!!!!

auto or 5 spd?

Oh, sorry. 5-speed.

well once you get decent tires on start at like 3500 rpms and dump the clutch and nail the gas if you bog go up if you spin let the throttle out some. you don't wanna go to high cause first gear is mad easy to spin.

I wouldn't dump the clutch, slip it out control the wheel spin, you just want a little spin and take off. Don't dump the clutch you;ll either spin or wheel hop like a mad man or bog the engine. fine a good rpm and slip the clutch out as you ride the gas down.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads