Go back to previous topic
Forum nameReal Racing
Topic subjectIm going to the track and got a couple ?'s
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i11&topic_id=5899
5899, Im going to the track and got a couple ?'s
Posted by 1TuffRS, Feb-13-02 10:48 AM
First of all, I dont know if this is the right forum to post this in, if not, my bad. Well Im going to the track this sunday with my car club and wanted to know how I should prepare for my run. I know i wont get numbers like Todd and Jake, but I would like to atleast get low 16's or high 15's (dont know if thats possible with my mods). I plan on installing my rear motor mount and putting my 14's on the front before I go, should I do anything else?? Also what is the best way to launch my MT 2gnt?? TIA
5900, RE: Im going to the track and got a couple ?'s
Posted by silverbullet, Feb-13-02 11:20 AM
remove as much weight as possible take your passenger seat out as well as your back seat take your spare tire out and the jack heck you might even want to get another belt and bypass your a/c
5901, RE: Im going to the track and got a couple ?'s
Posted by 1TuffRS, Feb-13-02 11:27 AM
well, ill take out the back seat, spare tire, jack and stuff, but I think taking out the passenger seat and the a/c belt is a bit much
5902, RE: Im going to the track and got a couple ?'s
Posted by Dave_FL, Feb-13-02 12:44 PM
The back seat weighs only a couple pounds. Just take out the spare tire,jack,and speaker box if you have one.
5903, RE: Im going to the track and got a couple ?'s
Posted by Michael_97RS, Feb-13-02 12:48 PM
Take a read through the racing section. There are some tips and other info in there.

"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines
5904, RE: Im going to the track and got a couple ?'s
Posted by 9D9 MITSU RS, Feb-13-02 12:55 PM
I'm not running, so I'll help u out with any "weight reductions." I say it's a waste of time to try and run my car. I have seen a lot of NT's get a great launch when they rev up and launch in 2nd. Dunno, but the guy I know a stock gs spyder took a spyder gs with intake and exhaust. He launched in 2nd, and the modded one launched in 1st.
5905, RE: Im going to the track and got a couple ?'s
Posted by 1TuffRS, Feb-13-02 01:00 PM
Thanks guys, Mike ill do that. Hey Steve you are going on Sun right?? I know some are going on friday as well. I would but I got an interview
5906, RE: Im going to the track and got a couple ?'s
Posted by Michael_97RS, Feb-13-02 02:52 PM
Why in the world would you launch in second? Getting a good slip of the clutch in 1st will be far better than trying to keep a high enough rpom in second worst for time and trans wear in my opinion.

"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines
5907, RE: Im going to the track and got a couple ?'s
Posted by dsmark, Feb-14-02 02:32 AM
yeah well running like 18-22lbs in your tires will help too, gets me better traction i think. do a few practice launches to figure out what works best for you...hold it at 3000 and pop...let it out and hang on:) might wanna slip a little at the track, its sticky.
5908, RE: Im going to the track and got a couple ?'s
Posted by VX100, Feb-14-02 02:40 AM
Put the 14s on the back as well.

Don't run those heavy aftermarket rims and tires back there.

Try getting there with as little gas as possible (it's at least 5.5 lbs a gallon). Take out the spare, jack, ect but make sure no riceboy comes along and steals it while you're doing your run.

When you launch, don't dump the clutch. Try to keep wheelspin down and you'll be fine.


5909, RE: Im going to the track and got a couple ?'s
Posted by thedawg, Feb-14-02 05:38 AM
Yah, how do you keep your tools n stuff from being stolen? I don't really wanna buy a big lock box to leave in the pits... I know I can just put a bike chain around my rims, but what about the cat/exhaust, headlight, etc?

Also, is it just my creative imagination or do our cars run faster when they're waxed instead of grungy?

Dan
5910, RE: Im going to the track and got a couple ?'s
Posted by Breezio, Feb-14-02 05:46 AM
hehe. Whenever I wash my car and then drive it right afterwards it "feels" faster.. it's odd.. I know it's not faster, maybe it's just the excitment of your ride being all clean and just wanting to drive the heck out of it :)