| Go back to previous topic | | Forum name | Real Racing | | Topic subject | Track times (good or bad) | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i11&topic_id=3768 |
3768, Track times (good or bad) Posted by freddy_00_69, Dec-20-03 07:28 AM
I went to savannah dragway last night which is an 1/8 mile track.I have a super 16g turbo, fmic, sfmu, exhaust, 2.5" downpipe, 30lb injectors and other little things running 8psi. I am also still spooling late and only getting around 5-6 psi in first. My tires were worn out already and i could not get any good traction, I mostly ran 9.9-10.1, but my best timeslip was when i redlighted:
reaction time: 0.429 60 foot: 2.486 MPH: 75.73 ET: 9.889
I also kept getting 2.5 60ft times, that was letting off the clutch off the line instead of dumping the clutch. What are you guys 60ft times without drag radials b/c i spun the whole way through first everytime b/c of my tires. Any suggestions!
|
3769, RE: Track times (good or bad) Posted by grain, Dec-20-03 07:49 PM
i get 2.2, 2.1 60 ft's. i have my post a little ways down on this. i have the same setup as you, but a smic
|
3770, RE: Track times (good or bad) Posted by Breezio, Dec-22-03 03:13 AM
I got 2.3 60/fts with my zx2 running on stock exteremly worn out goodyear crap tires. zx2 was basically stock also.
depends on the car.. but with the TQ and light weight of the zx2 much better to launch at a relatively low rpm and use the clutch and gas to get as much power to the ground without spinning.. spinning is bad. a eclipse should be teh same way i'd think.
| |