i've ran a 10.6 with short ram intake on a perfect run what are you running?

9.7 with star stage 1 at 5psi

9.46...star stage 2, 93 degrees, 6.5psi with a boost leak..

what do you consider a "perfect" run? what was you 60' time??

about 9.85 or so in the 1/8th, and I've been have to hit 72 mph

all without a turbo (lots of bolt ons) and a good 60 foot time

I am going to the savannah dragway this friday, i have a stage 2 kit, custom with hrc super 16g, i will let you guys know, now what are some of you turbo guys 60 foot times, also how bad are you spinning on the launch b/c i am having traction issues and i have the falken azenis on my car.

when i ran my runs i had a 14.94, 14.72, 14.50, 14.60 and 14.62 all with 60' times ranging from 2.2-2.39....also had no wheelspin which i attribute to me finally learning how to drive a bit, also to the 17" wheels, and high heat that day which caused a drop in power and also have a fair amount of lag with the t3/t4 turbo..

I think that I've posted the fastest all-motor 1/8th mile timeslip so far with a 9.6x. I had a 2.31 60 ft. if I remember correctly. My car had a short ram intake and some porting and polishing done on the tb.

i ran 10.2 with only intake

Star Stage 1, Starion FMIC, TurboXS Bov, Greddy TT etc. hopefully come spring time. *me excited*

1/8: 10.124 @ 73.34mph

HRC stage 2, Final drive mod, ATX ;(

10.1 @ 68mph in desperate need of a ring job, but I got lots o' bolt-ons.


95 Eclipse RS : 5 speed
15.7 @ 87.9mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

Hey man ^^^ I know the turbo with the ATX is discouraging when you run 1/8th mile times and some non-turbo 5 speeds are as fast or faster than you, but rest assured, the second half of that race would be a VERY different story.

9 flat @ 10lbs of boost

8.6@82 stone stock with a 1.9 60'
8.3@84 with I,E,MBC,emanage(mostly untuned) and a 1.8 60'

}(

9.1@81 with a 2.2 60' in the Eclipse (13.2 1/4)
Best was an 8.9 with no mph (track timing problems)

Originally posted by 992gnt
8.6@82 stone stock with a 1.9 60' 8.3@84 with I,E,MBC,emanage(mostly untuned) and a 1.8 60' }( 9.1@81 with a 2.2 60' in the Eclipse (13.2 1/4) Best was an 8.9 with no mph (track timing problems)

damn AWD :P I have yet to find out

8.8 spinnin 1st and 2nd.

Originally posted by siueclipse
8.8 spinnin 1st and 2nd.

What mph and 60ft?

10.9 @ 69

Originally posted by projectturbo
i ran 10.2 with only intake

10.2 w/ only an intake? wtf, that would put you in the mid 15's in the 1/4 and 2gnts run high 16's stock. There is no way just an intake would drop more than a second off your ET.

Originally posted by WickedESi

Originally posted by projectturbo i ran 10.2 with only intake

10.2 w/ only an intake? wtf, that would put you in the mid 15's in the 1/4 and 2gnts run high 16's stock. There is no way just an intake would drop more than a second off your ET.

My car went 10.0 once while it was DEAD stock, after the P&P and Short ram it picked up a good bit, also I became a much better driver. One thing that you have to realize is that there seems to be some pretty serious variances between the power our cars put out stock. Including my car, there have been a few other "freak" cars out there. Jake's probably being the most famous.

Originally posted by 98Talon
My car went 10.0 once while it was DEAD stock, after the P&P and Short ram it picked up a good bit, also I became a much better driver. One thing that you have to realize is that there seems to be some pretty serious variances between the power our cars put out stock. Including my car, there have been a few other "freak" cars out there. Jake's probably being the most famous.

I assume that's what your G-Tech told you you'd run? :rolleyes

9.530

9.9 all motor with a few mods and a good launch havent had a chance to run with turbo yet
stage 4 clutch, aluminum flywheel, solid motor mounts, Phantom grip, phantom boost, egt, a/f, oil psi, apexi TT, Jeep TB, Star stage 2 with custom 3 inch downpipe out passenger side bumper, custom ground kit, falcon azenis, 2 inch drop, eibach camber kit, crank scrapper,AEM cam gear, short shifter, AFX UDP and some other stuff

Should have times after test and tune this sunday. Best so far is a 9.99@72. Wheel hop is bad and I dont launch. Hard to get any traction in first unless I ease into it. If I go WOT off the line I can honestly spin the tires and go nowhere. 16x6 rims with 205's suck IMO.

10.4 =( lol @ atx @3 psi had no boost controller only running wastegate this weekend hopefully to see 9's with 8-10 psi =). 2.7 60 fters are the way to go! or my way =(


1998 Eclipse RS-T
Aim= masterkoronor
Email krwadd02@louisville.edu

Second run ever was a 9.474 1/8 with a 2.467 60' I had massive traction problems

best time so far 14.3 @ 101.1mph(no traction)
fastest 2GNT with a hitch! until proven wrong...

I ran a 9.7XX with 50 shot of n2o, cai, and headers.

jon - elude
2GNT - n2o

damn...me and EXTREME97 have some of the fastest 1/8th times for base stage 2 turbo kits...wooooo...hahaha...my best being 9.46@6.5psi

went to the track tonight with one of my friends who has a 97 rst star fmic, 60-1 turbo open dp and he ran a 8.9 in 1/8Th. could do a little better but was having traction issues off the line also he is running 8 psi

^^Work in progress pic
www.fastfabrications.com

your gonna need to post a slip for us to beleive that 8.9 with traction issues at 8psi? i dun think so...i ran 9.4 on 7psi with a 2.2 60'...so i realllly doubt 8.9 is gonna be possible without amazing traction.

ok i'll get a slip from him it was like a 2. somthing 60Ft and i think like 81mph at the end of the track. He had on my Falcons set to 18psi they helped but he still had some wheel hop.

^^Work in progress pic
www.fastfabrications.com

Originally posted by Justin99RS
your gonna need to post a slip for us to beleive that 8.9 with traction issues at 8psi? i dun think so...i ran 9.4 on 7psi with a 2.2 60'...so i realllly doubt 8.9 is gonna be possible without amazing traction.

hey i'm going to see him at the track thursday so i'll get one of his slips from him and post it for u

^^Work in progress pic
www.fastfabrications.com

1/8 - 10.946 @ 69mph

reaction. .7160
60ft 2.44
330ft 6.4299
1/8 e/t 9.6042
mph 78.25


those times are at 14psi with a catalytic converter and peeling out in 3rd gear

back in my rs i ran a 10.75 with a 2.3 60ft had intake and exhaust and it was about 30degrees outside (tracks are open year round in texas)

Jesus you guys are all slow......

here is one of my friends rs at 7psi he has one at 8psi where he runs 8.9 but i cant find the slip anywhere
I1 2.106
I2 5.920
E.T. 9.012
MPH 82.311

^^Work in progress pic
www.fastfabrications.com

My best time so far is a 10.304 at 71.91mph with a AT and Star Stage II at 7 psi.

With similar mods - short ram, perf. muffler, udp, no P/S or AC, CF hood... but with a low compression 8.6:1 rebuild which should have made me slower.

EDIT: I have another slightly better time slip someplace, but can't find it now. This was my first ever time at the track. I think my R/T and 60ft times were pretty good tho for my first time.

I ran a 9.706 on my star stage 2 at only 4psi untuned and on a stock slipping clutch. 60' was 2.2xx at like 74mph i think. was like 75-80 out that day. Now I'm up to 8psi on another stock even worse clutch and I'm gonna go to the track tonight and see what it runs LOL. w00ters

I ran a 9.60 at the track and posted the slip with ONLY a short ram intake, open header, and a P&P TB. Freak car what?

I ran a 10.4@67 my first time at the track. That was with a 2.344 60'. My only mod at the time was a short ram. I also had blown struts, bald stock tires on the 14s, and my clutch was slipping so bad my first run was 11.9@48mph. I need to get back to the track now that my car is all fixed. I may go this weekend and see what happens.

8.797 on 11psi with new setup

Sounds good UDLUZ. I think some people in this thread need to learn how to drive...

chrysler kid, u got those times while peeling out in 3rd? i think u need new tires.

here's mine anyways:
r/t .903
60' 2.365 (tire pressure at 20psi on crappy tires)
330' 6.161
1/8 9.279
mph 83.10

(bogged off the launch)

At the IDRC drags in 95 degree Houston I went 9.9 @ 68mph. 2.15 60ft. Mods: short ram, catback.

9.8 with 4psi(leaking bad)custom kit.. 16g turbo.

9.69 @ 74.07
Hahn Stage 2 with FMIC
Running 6 pounds boost

http://www.dsmtuners.com/gallery/showphoto.php?photo=41558&password=0&sort=2&cat=500&page=1

Originally posted by JWoodley
Should have times after test and tune this sunday. Best so far is a 9.99@72. Wheel hop is bad and I dont launch. Hard to get any traction in first unless I ease into it. If I go WOT off the line I can honestly spin the tires and go nowhere. 16x6 rims with 205's suck IMO.

9.68 @ 78
2.26 60ft
225/50s on the stock rims (helped with the traction issues...)

All NA bolts ons and a 75shot. This is an oldass thread.

1/8 ET -> 9.79
1/8 MPH -> 72.13








15.23 @ 91.80

Originally posted by JWoodley
9.68 @ 78 2.26 60ft 225/50s on the stock rims (helped with the traction issues...) All NA bolts ons and a 75shot. This is an oldass thread.

weakling...i always said boost was better

9.46@77 1/8th > 14.50@98.38 1/4...6.5psi...i woulda OWNED UR AZZZ

10.2's and 10.3's with a 98 manual base model talon

Manual,N/A-basic bolt ons, udp,short shift,catback,short ram,header,crane cams

in my avenger from slips i could find

2.2 60
6.5 330
10.1 1/8
69.74 1/8