I've just about got the hang of driving stick shift, but am clueless as of how to launch. If someone would explain the steps I would greatly apreciated it. Thanks.

Pick a launch rpm, play with it and youll find a good one for your car andyour mods. It will change as your change yoru car's set-up.

Hold that rpm steady with the gas pedal.
start to slip the clutch out, as you do give it more gas holding that rpm, feather the throttle (make adjustments back and forth), as needed for traction.
Slip the clutch out at a pretty constant speed, while adjustign the gas as you launch. by the time the clutch is out you should be full on the gas (astraction permits of course).
You don't want too much wheel spin, definately don't want wheel hop. But you don't want to bog the engine either.
Just play with it, it takes time to get the feel.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

If your turbo no help here but..i am na and i just hold it about 3200 and drop it you dont bog and you dont burn out like a mother. Works good but if you got a really high powered car then do what the other guy said.

or if you have a stock worn clutch on 164K like me, rev it up to about 3 grand, pop the clutch, mash the gas, and let that slipping son of a bitch do all the work :-)

hahah that was so damn funny..Teh slipping is like LSD nice seems like that should be in a big hick truck or somthing