| Go back to previous topic | | Forum name | Audio, Alarms, AV | | Topic subject | Wire for tapping into for dash illumination. | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i10&topic_id=9795 |
9795, Wire for tapping into for dash illumination. Posted by HeDog, Sep-27-04 04:05 AM
I'm wiring new gauges & I was wondering if there is a wire around the steering column for illumination, vs having to take out my head unit to figure out which one I used 8 years ago, when I installed my stereo system.
Thanks.
|
9797, RE: Wire for tapping into for dash illumination. Posted by All4thaN0okie, Sep-28-04 05:09 AM
the easiest place to hook the wire for your gauge light (the way i did mine anyway) is to use the wire that goes to your cigarette lighter..
|
9798, RE: Wire for tapping into for dash illumination. Posted by eclipse982nrRST, Sep-28-04 02:45 PM
find a green wire with a white stripe on it. thats the illumination wire. if you use that one, your gauges will turn on when you turn your corner lights and or headlights on. you can find one by the cruise switch behind it, or next to the gauge bezel. or anywhere the dash lights up really.
|
9799, RE: Wire for tapping into for dash illumination. Posted by madhatter210, Sep-28-04 03:37 PM
I used the one on the foglight switch works good and is close to the pillar.Just what I did though.
|
9859, RE: Wire for tapping into for dash illumination. Posted by Super20G, Oct-12-04 02:40 AM
like stated, green wire with white stripe, you can tap onto it right at the drivers fuse box
| |