Okay here is the deal, I have had good process with making and selling these boxes. Each box takes about a week to fully fiberglass, sand, primer and paint. Here is the new deal I am willing to try if you guys want to.
I am willing to make a one piece box ... meaning one base board that fits right around the trunk panels. You can have up to 3 12" subwoofer rings, 3 10" subwoofer rings with 1 amp rack. Or you can get one 15" subwoofer ring and 2 amp racks. Or just rings or racks, your choice. Each box will ONLY be $225 + shipping. Shipping is usually about $75 FedEx freight ground. The reason so cheap because of this: All boxes will be shipped unpainted and un-sanded. After the box is fiberglassed, it is pretty smooth but still needs some sanding done for absolute smooth finish. Sanding would take about 2 hours by hand or about 30 minutes to an hour with electric sander or an air DA sander or something like that. If your intrested email me at eclipse982nr@aol.com. I do request a $100 downpayment if you plan on buying one so I know I am not getting screwed over obvisously. Everyone, this should be a better and cheaper success, so let me know guys/gals!!!

-Mike

please post a picture of a finished box, this always helps with sales.

there are the 2 posted below of my setup ... look down some!

how much do they weigh? and they just sit right up againt the back seats?

they weigh maybe like 20-30 lbs depending on what you want my friend. i can make them to lay against the rear seats but something like that is gonna be more than the $220 + shipping. something like that like i made for my car would cost you like 350 + shipping and that unsanded. sanding on those werent that easy. then again when i did, it was my first box i made and now im sweet at it and can almost get it perfectly smooth when its all dry.

let me know if you want one!

where did you learn how to do this? I've been wantint to get into fiberglassing for a long time.

I don't know if this guy has proven himself worthy yet or not....but just do a search in the interior exterior forum for verticle door hinges. I for one would be leary of sending this guy any money. Just a heads up.

first off, i learned all from trial and error with fiberglassing.

and for the dude who said they couldnt trust me, um the hinges thing was like 6 months ago and thats way over and cleared up goofy. no one ever sent me money nor did i sell any cuz there werent and good ones made.

Originally posted by eclipse982nrRST
first off, i learned all from trial and error with fiberglassing. and for the dude who said they couldnt trust me, um the hinges thing was like 6 months ago and thats way over and cleared up goofy. no one ever sent me money nor did i sell any cuz there werent and good ones made.

You haven't been a member for 6 months dumbass. If you want to win back any respect on this board you'll make these boxes first and then sell them. Sure we see the 1 in your car. But you could have had someone like me make that and not really have a clue how to do it which is what we all are anticipating after such events as "The Hinge Scandle" and the "I Put My Intercooler Pipes In Backwards" incident. And let's not forget the 1,001 posts on your wastegate problems.



Make the shit, then sell it, don't hype people. Start a thread that says "Hey, here's 10 sub boxes I'd like to move *pics*" then start talkin.

Mike I don't see no pics......I mean "I" personally know what your setup looks like but I think they need to see it to.

Originally posted by Pushin420a
Mike I don't see no pics......I mean "I" personally know what your setup looks like but I think they need to see it to.

I've seen it. It's nice but I wouldn't pay this guy $0.10 without seeing one in a box exactly like it with my name on the shipping label ready to go.

Well actually I'd just make my own, but that's beside the point.

Originally posted by a_miller_76

Originally posted by Pushin420a Mike I don't see no pics......I mean "I" personally know what your setup looks like but I think they need to see it to.

I've seen it. It's nice but I wouldn't pay this guy $0.10 without seeing one in a box exactly like it with my name on the shipping label ready to go. Well actually I'd just make my own, but that's beside the point.

Aaron if you can make me a box I would be willing to pay you since your kinda local...PLEASE SAY YES...

Originally posted by Pushin420a

Originally posted by a_miller_76

Originally posted by Pushin420a Mike I don't see no pics......I mean "I" personally know what your setup looks like but I think they need to see it to.

I've seen it. It's nice but I wouldn't pay this guy $0.10 without seeing one in a box exactly like it with my name on the shipping label ready to go. Well actually I'd just make my own, but that's beside the point.

Aaron if you can make me a box I would be willing to pay you since your kinda local...PLEASE SAY YES...

Well since I can only come on the weekends it will be kinda hard, but figure out what you want and I'll try. We'll work out some trade and shit.

I would personally like to learn to do this myself. anyoen in columbus ohio know how to d othis that would help me do it? I don't want people doing it for me but someone who could be there and help me do it.

as for the hinge deal. dude come on, you claimed to sell one to a guy in florida who loved it, you had pics and htis big ass story behind it. Plain and simple dude, you lied, you fucked up, now who would trust you after that?

dude is your monkey wacking off??? lol

jaKE
"THE ATX GOD"

are u still parting out your car?

you do side panel molding? thats what i need -=)

let me see some pics

Originally posted by er0ckz
let me see some pics

---------------------------------------

"Oh yea, well...My manifold does cool twisty things"

www.EnhancedMotorSports.com

Originally posted by xtrickedeclipsex

Originally posted by er0ckz let me see some pics

--------------------------------------- "Oh yea, well...My manifold does cool twisty things" www.EnhancedMotorSports.com

DISCLAIMER: Some of what I say may upset you, make you cry, or even make you consider suicide. I am not responsible for how your sensitive punk ass decides to take it

The official 2GNT EGO Wrecker

Pictures of samples of fiberglassed stuff I made for my car. I can pretty much make you anything you want out of fglass thats not outrageously crazy ass! Anyone intrested in anything like these.....

did you spray paint that with that new spray paint? or is it pro? it looks good either way :D

Chameleon spray paint? hmmm, never seen it!
Its left over HOK from my friends dads shop that he did a camero with, i got it for cheap. took about 10 times using it to get it right though, damn shit i tell you. it looks hot but i sold that box to some guy off the board here!
anyone intrested in any of those things there i could make for ya!?


Mike

How much money are we talking? I'd be interested in the sub enclosure.

$220 plus shipping

^^^ fairly cheap for the amount of work and sanding involved in making a sub box.


Mike