| Go back to previous topic | | Forum name | Audio, Alarms, AV | | Topic subject | couple questions about my VIPER 650 install | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i10&topic_id=9576 |
9576, couple questions about my VIPER 650 install
Posted by Blizare, Aug-12-04 08:18 AM
Do I need Double Pulese to Lock my doors. the unlock works when I disarm but it doesn't lock the when I arm.
or do i need the door lock duration to be 3.5 sec or 0.8 sec pulses?
TIA
wooters
|
9577, RE: couple questions about my VIPER 650 install
Posted by azdave, Aug-12-04 05:39 PM
Should be no need to use double pulse or use longer than .8 duration for the lock pulse. Something must not be wired right if it works in one direction and not the other. I tapped into my lock/unlock wires behind the glove box in a wire harness on my 98. Mine didn't have factory keyless entry either if that might makes a difference.
A negative pulse to Red/Blue should lock
A negative pulse to Brown/Red should unlock
There are several places you could pick up these wires. Mine was already tapped behind the glovebox from a previous alarm install. The wires can also be found behind the radio close to the relays found there.
| |